Rmabad

BEAMink

Got tired of always running to the store so thought I would model my own. They work surprisingly well.

Guitar Picks

models

OwenTF

This is my print in place fidget ring design. The concave inner ring keeps the convex outer ring in alignment and allows it to spin freely without any assembly need. I have included a section view of this geometry below. If you enjoy the design a like or make would be appreciated.&nbsp;Check out my new Banana Switchblade <a target="_blank" href="https://makerworld.com/en/models/480959#profileId-392609" rel="nofollow noopener">here.</a>You can obtain a commercial license to sell prints of this <a target="_blank" href="https://www.printables.com/@OwenTF_1791221#join:894" rel="nofollow noopener">here</a>.<figure class="image image_resized" style="width: 35.97%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000237319/design/2024-03-05_1db0d25e10fdc.png"></figure>Instructions<ul><li>Estimate your finger diameter then select the ring with the corresponding inner diameter.</li><li>The ring prints in place and no assembly is required.</li><li>I recommend printing with an outer brim.</li><li>The gap between the two rings is 0.25mm. If this gap is too small for your printer, scale up the outer ring in the x and y direction until the inner and outer ring no longer fuse together.</li><li>Adding some generic plastic lubricant significantly reduces friction and allows the ring to spin for much longer.</li></ul>

Print in Place Fidget Ring (21 Different Sizes)

toys

Jaxel

Another of many PTFE guides for the X1C and the AMS. This lines up the input feed.&nbsp;You should have longer M3 screws in the accessories kit that came with your printer.If you don't have any, you can buy any generic M3 hex socket screw kit off <a target="_blank" href="https://www.amazon.com/gp/product/B0B31SC98Z" rel="nofollow noopener">Amazon</a>.&nbsp;You can find other models I have released for the X1C/AMS here:<a target="_blank" href="https://makerworld.com/en/u/2811301167/collections/109412" rel="nofollow noopener">https://makerworld.com/en/u/2811301167/collections/109412</a>&nbsp;If you appreciate my models, please consider <a target="_blank" href="https://ko-fi.com/ultrajaxel" rel="nofollow noopener">buying me a coffee</a>!

X1C AMS Buffer Guide (input)

P1S Accessories

Barbatros

Wrist rest inspired by Carpio 2.0 ergonomic wrist rest,https://deltahub.io/en-eu/products/carpio-ergonomic-wrist-rest.

Wrist Rest

random

AngryPearl

Now available in other sizes: 20x, 10x, 8x, 2xCheckout my profile for more models: <a target="_blank" href="https://makerworld.com/en/@AngryPearl" rel="nofollow noopener">https://makerworld.com/en/@AngryPearl</a> &nbsp;I added Gridfinity to the original box for spools, but I made it a bit tighter to fit more spools on a small box. Now 3x3 grid fits 36 spools with economical and faster print.Print settings:<ul><li>Wall generator Arachne</li><li>Added support for the bottom but I think it wasn't necessary</li><li>For material saving, I printed it with 5% infill and 2 bottom layers instead of 3</li></ul>Printed in less than 3 hours, and used around 80g PLA material, and printed on PEO plate for cool triangles effect.&nbsp;You can add some text to Mini Spools, but you need work a bit with it. Text and bottom need to be on same surface, but when you change text, text is moved, and you need to adjust it.&nbsp;Based on mini spools filaments from: <a target="_blank" href="https://www.printables.com/pl/model/360829-mini-filament-spool-swatches-box" rel="nofollow noopener">https://www.printables.com/pl/model/360829-mini-filament-spool-swatches-box</a>&nbsp;

Gridfinity - 36x Mini Filament Spool Swatches Box

Swatches

eds_3d_shop

⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏&nbsp;<h2>Funnel for AMS silica/dry pods</h2><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=kQihMYbUAbU"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/kQihMYbUAbU" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Perfect funnels for <a target="_blank" href="https://makerworld.com/en/models/60633#profileId-62817" rel="nofollow noopener">big (three in the middle) and small (two slimone on the corner) silica dry pods for Bambu Lab AMS</a> or <a target="_blank" href="https://makerworld.com/en/models/447551#profileId-354244" rel="nofollow noopener">AMS Silica Dry Box for Aqara Humidity Sensor</a> 👌😍Most funnels for the popular pods are inserted, have to be held by hand and do not allow the pods to be filled to the brim…😒&nbsp;These funnels are very easily put on instead of the lid (but specifically not as tight as the lid!) and stay on the pods by themselves and can be comfortably held together with the pod on the funnel handle! In addition, the pods can be easily filled to the brim because they are clipped on from the outside.👌&nbsp;A beautiful bamboo logo fits perfectly on the handle and there is a small grip-bar at the bottom, which is very comfortable to hold!  Print / Install Instructions (or just use one of my print-profiles!)<ul><li>place them with the logo on the build plate</li><li>first layer line width: 0,38 (0.4 mm Nozzle) (for perfect look of the bambu-logo)</li><li>first layer speed: 20ms per second (for perfect look of the bambu-logo)</li><li>2 perimeter, 5 top, 3 bottom layer, 20% infill</li><li>top surface pattern: Concentric</li><li>bottom surface pattern: Concentric</li><li>print layer height: 0.2mm</li><li>WALL generator: Arachne</li></ul>&nbsp;— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like this model! ;-)<h3>Take a look at my another very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000165524/design/2024-01-12_00009ce9c82bf.png"></a><figcaption>🔗<a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">Eds_3D_Shop designs on MakerWorld</a> 🔗</figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;

Funnel for AMS silica dry pod box

Desiccant

denwagg

Stores Spools. Uses 4-1" id PVC tubing, 1.315 OD, 1.029 ID any length you choose. Designed to fit on 256mmx256mm Plate. Hot glue joints added if you choose to permanently attach together. No supports needed. Make these as long as you want I used 2ft sections of pipe. Also designed to stack as high as will allow the weight using the adapter included. Designed in Solidworks&nbsp;PLA or PLA+ works great, I used .25mm step, 2 walls 10% gyroid fill. On P1P Center takes 5hr, Both bottoms take 3.5hrs and both tops take 5 hours. Total of 19 hrs print time.&nbsp;12-22-23Added adapter to allow you to stack multiple racks&nbsp;12-31-23Modified Print Profile to include adapters if needed&nbsp;01-24-24Added Shelf mounts

Spool Rack

Useful

worddd

Indoor plant pot stand designed for 8 inch diameter pots… with an inset xoxo to remind your partner you're thinking about them!&nbsp;Printed in matte black PLA with fuzzy skin to give it a little texture, 10% gyroid, 3 walls, and is plenty strong for the pot.&nbsp;Included 3mf and profile have the xoxo painted with silver silk.&nbsp;I have another design for 6" pots: https://makerworld.com/en/models/139786

8 inch indoor planter stand - xoxo

Plant

Head Concepts

<h3>TwirlTidy Organizer</h3>&nbsp;Installation Directions:<ol><li>Print Components: Print the three components - base, hook assembly, and locking pin.</li><li>Prepare the Installation Area: Choose a suitable location under a cabinet or shelf.</li><li>Install the Base:<ul><li>If using screws: Align the base where you want to install it and mark the screw holes. Drill pilot holes and screw the base into place.</li><li>If using adhesive (for the upcoming two-sided tape version): Ensure the surface is clean and dry. Apply the two-sided tape to the base and press it firmly against the installation surface.</li></ul></li><li>Assemble the Hooks: Align the hook assembly with the base. Gently snap it onto the base.</li><li>Secure with Locking Pin: Insert the locking pin through the designated holes to secure the hook assembly to the base.</li><li>Enjoy Your Organizer: Your TwirlTidy Organizer is now ready to use! Spin it to easily access your organized items.</li></ol>Description: The TwirlTidy Organizer is a versatile, spinning hook organizer designed for convenient access and space-saving organization. Ideal for kitchens, closets, bathrooms, and office spaces, this innovative organizer features four hooks on a rotating base, allowing easy access to utensils, jewelry, keys, and more. Crafted for 3D printing, it comes in three snap-together pieces, including a sturdy base, a rotating hook assembly, and a locking pin for secure installation.&nbsp;Key Features:<ul><li>4-Hook Design: Efficiently organizes various items in one compact space.</li><li>Spinning Functionality: Allows for easy access to all items with a simple twist.</li><li>3D Printable: Designed for easy printing and assembly at home.</li><li>Snap-Together Assembly: No tools required for assembling the hook mechanism.</li><li>Versatile Installation: Can be installed under cabinets or shelves for optimal space utilization.</li></ul><h3>Upcoming Features:</h3>Two-Sided Tape Installation Option: Coming soon, an alternative version that allows for tool-free installation using strong, adhesive two-sided tape. This option is perfect for renters or those who prefer a drill-free setup.Customization and Remixing: We're excited to see how you make the TwirlTidy Organizer your own! We encourage users to remix and customize their own hook designs to create more attachments and personalize their organizer. Unleash your creativity and share your unique versions with our community.

Lin