For those who have lost or unfortunately damaged the original base and do not want to buy a new lamp, with only 20g of PLA and less than 1 hour of printing you will be able to reassemble the lamp. The only difference with the original is that I did not provide the sliding slot for the wall screws, while the side screws will need to be replaced with standard wood-thread screws. Therefore, the base should be attached to the wall first, and then the lamp to the base.

New release for single pair of glasses!

Echo dot 3rd gen plug support I needed to make my third-generation Echo Dot easier to position in the bathroom. Since I don't have a nearby countertop and the 15W Amazon power adapter, I had to recreate one from scratch with the ability to manage the cable well and hide it from view. I hope you like it and it can be useful to someone.

A mosquito and other flying and non-flying insect cap to cover 90 mm pipes. It is recommended to screw it to the pipe to prevent the air flow, hindered by the net, from making it fly away Have fun

Hello friends, with this puzzle you will taste the frustration of interlocking games 😂😂😂, I'm joking it is very simple but at the same time challenging, once solved give it to your friends or relatives and you will see them go crazy ... and probably you will have to reprint it 😂😂.

This basketball holder is easy to print and uses very little filament, it can also be easily printed on A1 mini which makes it accessible to everyone (maximum 4 per plate).

hello everyone short post for updates on the A1 mini drawer. let me know if you like it or if you have any other suggestions. Thanks

My Annual Report

A new interpretation for the use of the Clock Components Kit 011 from Bambu Lab, inspired by the space age design, this clock with custom hands will take space and attract the attention of your friends! 🚀🛰️🪐