Riptus

Clyde Frog

Reusable Soap Dispenser. This is a reusable soap dispenser. It is made for 28-410 pump caps. Find out if you have a 28-410 pump cap at home already with this website: www.paramountglobal.com/knowledge/bottle-neck-thread-finish/

Reusable Soap Dispenser

Bathroom

Jal Shah

I recently got quite interested in polyhedrons and geometry for some reason. While I was watching some interesting videos, I also came across Japanese Kumiko (woodworking) technique for assembling wooden lamps. With this inspiration, I just designed a simple lamp in fusion 360.<h5>Update (April 11, 2023):</h5>Based on some nice suggestions, I have added “Insert Film” file which is simply a triangle with same size as the insert but only 0.2mm high which can be printed and used as backing film instead of Vellum Paper.Additionally, I have also uploaded 3 new files “Frame with Hole”, “Insert with Hole” and “Insert Film with Hole”. You can choose to print one copy of these files to have a predesigned hole for LED wire at the bottom. Just make sure to print 1 less copy of regular files if you go with this option.<h4>Printing</h4>You will need 3 copies of Frame and 4 copies of Insert piece.I used iSanmate Wood Filament for the Insert pieces and Amolen Walnut Wood Filament for the Frame pieces. I also found that having bottom and top layer Concentric was more visually appealing to me.<h4>Assembly</h4><ul><li>Glue \ Press fit 3 inserts into 3 frames.</li><li>I used Vellum paper as the inside backing to diffuse the light.</li><li>Use the last remaining insert to cut 4 pieces of Vellum paper and stick them to the inside of the frames.</li><li>Glue all 3 frames together keeping the bottom side open.</li><li>Finish led work before inserting the bottom insert.</li><li>Lastly finish gluing the vellum paper to last insert and attach it on the bottom side.</li></ul>

Tetrahedron Lamp

Lights

TripleGWorkshop

This really took forever to get the gates to print and work right. They are a little loose to allow you to scale this down to 80% or maybe smaller. Every part is built to print without supports. Get the Matching Wall Set: <a href="https://www.printables.com/model/435566-medieval-palisade-wall-set" rel="nofollow">https://www.printables.com/model/435566-medieval-palisade-wall-set</a><figure class="image image_resized" style="width:65.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/120180/2023-10-26_k0n7jj6jas9h.webp"></figure>& some Spiked Barriers: <a href="https://www.printables.com/model/435558-medieval-palisade-spiked-barrier" rel="nofollow">https://www.printables.com/model/435558-medieval-palisade-spiked-barrier</a><figure class="image image_resized" style="width:66.58%;"><img src="https://makerworld.bblmw.com/makerworld/draft/120180/2023-10-26_9188xshcddcw.webp"></figure>Lookout Tower <a href="https://www.printables.com/model/437186-medieval-palisade-lookout-tower-no-supports" rel="nofollow">https://www.printables.com/model/437186-medieval-palisade-lookout-tower-no-supports</a><figure class="image image_resized" style="width:68.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/120180/2023-10-26_ojfx76mmax08.png"></figure>

Medieval Palisade Gate & Arch - Print in Place - No Supports

jarvizar

3d miniature of Disneyland Resort in Anaheim, California!&nbsp;Includes both Disneyland Park and Adventure Park!&nbsp;&nbsp;Check out my collection of other miniatures: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/146964" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/146964</a>&nbsp;Walt Disney World Magic Kingdom miniature: <a target="_blank" href="https://makerworld.com/en/models/216013#profileId-235139" rel="nofollow noopener">https://makerworld.com/en/models/216013#profileId-235139</a>&nbsp;&nbsp;Created in Blender using data imported with the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;<h3>Slicing & Printing Details</h3>&nbsp;This model was designed to be printed with a 0.4mm nozzle (0.16mm layer heights) or a 0.2mm nozzle (0.08mm layer heights)&nbsp;I have uploaded two different print profiles for each nozzle size with the recommended settings pre-applied ready to slice and print!&nbsp;Each print profile includes two different models of Magic Kingdom, one with suspended monorail tracks and another with grounded tracks (no overhangs).&nbsp;<figure class="table" style="width:912.094px;"><table class="ck-table-resized" style="border:1px double rgb(179, 179, 179);"><colgroup><col><col></colgroup><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/715777/2024-03-13_5fa073cac47db.png"></figure>Suspended Monorail Tracks</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/715777/2024-03-13_ffd003b89375f.png"></figure>Grounded Monorail Tracks</td></tr></tbody></table></figure>&nbsp;&nbsp;Note: If paths or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls. Can also try enabling “Detect Thin Walls”.&nbsp;The included designer print profiles have the above settings pre-applied!&nbsp;This model also includes a small wheel for Mickey's Fun Wheel / Pixar Pal-A-Round. Personally I attached it with a tiny bit of superglue.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/715777/2024-03-13_b6ca7ee6e419d.png">&nbsp;Filaments used in photos: Sunlu Matte White (miniature), Bambu Matte Black (frame), Sunlu Sky Blue (water)&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/715777/2023-12-27_7536c6348b762.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

Disneyland California 3D Miniature

Crafty Sven

Rescaled battle droid that prints in parts and fits together as it does in its original LEGO form. This .stl is 400% of the original size. Can be scaled to any size !This size is perfect as a single pen holder ✒🖋🖊🖌🖍I printed these parts one by one and I recommend that. Both the 3mf and gcodes already have a little attachment at the bottom of the hands and head to help the bed adhesion. The orientation is purposely standing to give the parts a nice finish all and all. This has to be printed with supports on (included in gcodes) and they are very easy to remove with pliers and leave a very nice finish. Happy printing 😊

Lego Battle Droid 400%

Lego

Neebick

Master Sword pen that is designed to use Pilot G2 ink refills (Gold and silver inks are available for extra fun). I designed the hilt for multiple color printing but looks very nice in all silver as well.<h3>Printing</h3>The model prints great with a 0.4mm nozzle. All pictures are printed with it at 0.08mm layer height. A 0.2mm nozzle will look better with finer details like the Triforce on the blade but is optional.&nbsp;Print at lower layer heights for better detail and smoother feel while handling.&nbsp;Supports are necessary for the hilt at the section that the blade inserts into. Supports also helps with the blade top since it is very narrow on the plate and could jostle loose. The screw must be printed vertically for best detail and function.&nbsp;I printed the blade in Bambu Labs Basic PLA Silver. This filament gave a very smooth and satisfying to touch finish without paint. I had to print on separate plates to achieve it since unsightly bulges appeared when the nozzle moved between parts to often. This is most likely due to the tall and skinny profile of the parts.<h3>Assembly</h3>The hilt prints in two halves for better detail and less filament waste on purges. Remove supports and glue halves together. Alignment is important for appearance and part fitment.<figure class="image image_resized" style="width:32.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_8fcaf10bf4d81.png"></figure>&nbsp;The blade top inserts into the hilt. Friction fitting will hold but glue can be used for a more permanent assembly.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_43c74889e437e8.png"></figure>&nbsp;Slide Pilot G2 refill cartridge into blade body. It will not go all the way in. The fitment is purposely tight for better feel while using as a pen.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_944e3f5ee510a8.png"></figure>&nbsp;Slowly screw in the blade top into the blade body. You will feel a slight resistance as the screw pushing against the ink cartridge. Continue till the parts align flush. DO NOT over tighten to avoid damage to the threads. There is a slight over tightening allowance but you will not be able to get an additional turn without damaging the parts.<figure class="image image_resized" style="width:31.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_80381d0adb3148.png"></figure>&nbsp;To remove the ink cartridge, unscrew the top and press the tip against a piece paper. There should be a slight pop as the the pen tip aligns with the blade tip. The cartridge should just shake out now.

Master Sword Pen

Toys

pops

<h2>[UPDATE] • Triple Containers added due to the requests of some people  • I also added a 4x4 container for large items for heavy duty usage. • Clearances Improved A model to store screws, nuts, nails and other small parts lying around your lab. The parts interlock using the dovetails.</h2><h3> PLEASE PRINT THE TEST FILE FIRST The parts are supposed to have friction, but should slide in easily. If your test parts dont fit you can adjust this using XY compensation in the slicer.</h3>&nbsp;Print settings: Infill: 20% Walls: 2/3 Speed: Slower speed is highly reccomended as the overhangs turn out nicer Layer Height: Any up to .25Support: Not needed

[UPD] SnapStack - A Modular Storage Bin Organizer

Organization

Sakul

Introducing the &#34;Spaghetti Mate&#34; – your kitchen companion for precision pasta perfection! 🍝✨  Say goodbye to guesswork and hello to perfectly portioned spaghetti every time. This innovative doser allows you to effortlessly measure out the ideal amount of pasta, tailored to your serving needs. Whether you&#39;re cooking for one or a crowd, the Spaghetti Mate lets you customize your spaghetti servings with ease. Metric ans imperial versions available. &nbsp;  You may also like:&nbsp;<figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000117711/design/2024-06-04_b9c40f7954426.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000117711/design/2024-05-01_85f01efc3a63d.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>Bon appétit!🍝

"Spaghetti Mate" Pasta Portioner

Kitchen

Kocyns

<h3>INTRODUCTION</h3>This car model was created based on the <a target="_blank" href="https://makerworld.com/en/models/218462#profileId-241229" rel="nofollow noopener">Golf 1</a> model and inquiries for additional models. I adopted the best know-how and found further improvements for easier assembly, strength, and better appearance.&nbsp;The model will now be regularly updated because the template has a lot of details that cannot be done in a short time.&nbsp;If you have any ideas for improvements or modifications, please let me know!&nbsp;<h3>BASIC INFO:</h3><ul><li>scale 1:40</li><li>Glue is not needed</li></ul><h3>ASSEMBLY: <a target="_blank" href="https://youtu.be/sd6-QBgvXbM" rel="nofollow noopener">video</a></h3><figure class="media"></figure><h3>UPDATE:</h3><ul><li>Added version R1.4</li></ul><figure class="image image_resized" style="width: 73.82%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000376939/design/2024-04-25_f1be529cdd6d6.png"></figure><h3>Planned improvement:</h3><ul><li>new rims ✅</li><li>details/additional parts of the model ✅</li><li>AMS</li></ul><h4>Commercial uses:</h4>If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a>&nbsp;

DeLorean DMC-12 (Back to the Future) - Kit card

Kit Cards

AndreoBTW

UPDATE 30/01/24: 190% is updated for a better printing quality, splitter in two pieces&nbsp;This is a remix of Fillenium Malcon with better quality and adhesion for Bambulab X1c - P1S and P1P There are two profile:<ul><li>100% print in place</li><li>190% in two plates for Huge dimensions!</li></ul>

Fillenium Malcon - Remixed 100% and 190% - Star Wars - Support free

Star Wars

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>

Pokemon-Squirtle Leader (NO SUPPORT)

Pokemon

traxendre

Hello there, I propose you this useful Broom stick holder that can be mounted on wall / Furniture&nbsp;This improve system avoid clip that can damage the support and do a satisfying Clic&nbsp;This model is for 22mm diameter Broom stick, Also give STL for 25mm,30mm,35mm same profil should work fine&nbsp;No support needed, can be print in PLA (will add my profil BBL Studio for strong part) or others your into.&nbsp;If you don't use the profile be sure to put a least 4 walls loops and 15% infill to be strong enough&nbsp;Usage : 1 - Print it 1bis - verify that the print is strong enough1ter - you can add EPDM tape inside the ring to smoth things up! very easy and removable2 - put it in a wall with adequate fixation in fonction of your wall3 - unclip the mechanism 4 - Clip you tubeEt Voila !&nbsp;you can print more and put it at different places for conviniences&nbsp;Will upload a model For Dyson Tube look at my profil!&nbsp;And yes i will do on for light Sabers ;)&nbsp;OG @fns720Don't hesitate to like and add to you collection then leave a review after your print it ;)&nbsp;

Mechanical Broom Holder No support 22mm

Tools

CatPRAW

This 3D-printed stand is specifically designed for the "Helldivers 2 Super Destroyer" model. It is crafted to provide a secure support to the intricate design of the Super Destroyer. The stand's dimensions and contours are meticulously tailored to complement the aesthetic and structure of the model, ensuring that it is displayed prominently.

Helldivers 2 Super Destroyer Stand

Helldivers

3Dylan

Plant label stake that allows for custom signs using the Makerlab MakeMySign feature.&nbsp;Just print the Stake, your custom sign, and then snap together. The fit is tight so I found it best to place on a table and press down until it clicks.&nbsp;Print premade ones or make your own!&nbsp;Includes:<ul><li>Aloe</li><li>Bell Pepper</li><li>Lettuce</li><li>Snake Plant</li><li>Poppies</li><li>Spinach</li><li>Peppermint</li><li>Cilantro</li><li>Basil</li></ul>&nbsp;<h3>How to make your custom plant label:</h3>MakerLab MakeMySign Settings Detailed below:<ul><li>Square Base</li><li>30mm Height</li><li>Single-Top Hole - 4mm</li><li>Base Thickness - 2mm</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/217866/2023-11-22_6c8f600e39b9d.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/217866/2023-11-22_85e37a5bd677d.png"></figure>&nbsp;&nbsp;Any other setting should be customizable to whatever you like!&nbsp;&nbsp;Profiles available for AMS to get the dual color effect, or separate files for the stake and sign with a pause for a filament change on the sign for those of us without AMS.&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)&nbsp;Mine is for a Bell Pepper plant but if you use the profile and swap out the sign to your custom one, the pause still work as long as the base thickness is 2mm.&nbsp;