Roberto GC

PrintsByJar3D

This is a gladiator mask modeled after the mask that MF DOOM wore - it is made to be able to print without any supports (however, I have supports included in the model file for a finer print for the overhangs in the eye holes) I printed these without skirts or rafts - just ensure you have good bed adhesion to obtain a successful print!

MF DOOM / Gladiator Mask

mask

Hugo

<h2>NEW : parametric with Fusion 360 and STEP files available <a target="_blank" href="https://makerworld.com/en/models/377006" rel="nofollow noopener">here</a></h2>&nbsp;I enjoy printing my own storage boxes, but I don't like to add extra hardware like screws. That's why I designed these boxes.  I developed a completely new closing mechanism utilizing the natural elasticity of the plastic for a satisfying snap-close.<h4>Filaments used in the pictures : <a target="_blank" href="https://formfutura.com?aff=7" rel="nofollow noopener">Li</a><a target="_blank" href="https://formfutura.com/product/refill-petg/?aff=7" rel="nofollow noopener">nk</a></h4><ul><li>FormFutura Refill PETG Signal Blue</li><li>FormFutura Refill PETG Iron Grey</li></ul>&nbsp;<h3>How to choose your size :</h3>&nbsp;There are 36 different sizes available to accommodate your needs, with dimensions specified in the name of each STL file. The three numbers correspond to the inside dimensions of the box, the first one is the width, the second is the length and the third is the depth.For example, the "Box_bottom_60_60_50" describes the box with inside dimensions of 60mm x 60mm x 50mm :<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_h9g3z0yeu3ti.jpg"></figure>The top has only two dimensions (width and length), which should correspond to the first two numbers of the bottom.For example, the "Box_top_60_60" will match the following bottoms :<ul><li>“Box_bottom_60_60_25”</li><li>“Box_bottom_60_60_50”</li><li>“Box_bottom_60_60_75”</li><li>“Box_bottom_60_60_100”</li></ul>The "Box_clip" is necessary for each box. The narrowest boxes will require one, while all the other boxes will require two.&nbsp;All the STL files are already oriented for optimal printing. I recommend PETG and infill of 15% or more.&nbsp;<h3>Assembly :</h3>&nbsp;The top and bottom snap fit together. To assemble them, just press them onto a table like this :<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_oiifzqba65c6.jpg"></figure>It is important to assemble them with this specific orientation as a groove will aid in snapping them into place.I find it easier to assemble one of the two hinges first with a twisting motion, and then press the second hinge as described above.&nbsp;Then insert the clips with a twisting motion like this :<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_t5kzv6lq2e4s.gif"></figure>When they are instaled, they are very sturdy and will hold the box closed as long as they are in place.Just make sure to install them with the right orientation to ensure easy box opening. The face that was on the print bed should be facing outward :<figure class="image image_resized" style="width:61.55%;"><img src="https://makerworld.bblmw.com/makerworld/draft/719091/2024-02-29_tte3p1m9l6jn.jpg"></figure>&nbsp;Enjoy :)

SnapLock Storage Boxes

game

TrocheHole

Dual ring for easily opening the cap (only the most common size of approx. 30mm DIA) of a plastic/PET bottle.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/63968/2023-09-22_23hxc5a6yksx.jpg"></figure><h4> Sizes</h4>Five different sizes of hole for caps are available. (Only one size of hole for fingers, 22mm.)I recommend that you try printing size “03-Medium” first. Then, if the size does not fit your bottle cap, try another size.<ul><li>01-ExtraSmall ─ (-0.4mm in DIA)</li><li>02-Small ─ (-0.2mm in DIA)</li><li>03-Medium ─ (±0mm in DIA)</li><li>04-Large ─ (+0.2mm in DIA)</li><li>05-ExtraLarge ─ (+0.4mm in DIA)</li></ul>

Plastic/PET Bottle Cap Opener

work

emcalrod03

Hello everyone, i made this model for helping my son to paint miniatures. Its made specially for “REDGRASS” hydration paper , u can find it at amazon. <a target="_blank" href="https://a.co/d/1oWYXUg" rel="nofollow noopener">https://a.co/d/1oWYXUg</a>Below the hydration paper u will have to fit a sponge like this one <a target="_blank" href="https://a.co/d/0mRrl10" rel="nofollow noopener">https://a.co/d/0mRrl10</a> Feel free to remix and improve the model.Printed in PLA with 0.20mm layer height, no supports needed.&nbsp;

WET PALETTE WITH ACCESSORIES 

minis

Mo2408

I've made a kit card version of my 17 pdr gun.

OQF 17 pdr kit card

kitkard

holonda3d

I designed this guide because I was afraid the cable might get tangled,Keeps cable out of harm&#39;s way, I wish you fun with it and would like feedback, use at your own risk, I have it on my printers for months without any problems, it just does its job.