Replica4292

Elliott_

Customizable Hose Adapters with <a target="_blank" href="https://cad.onshape.com/documents/daa108770c30894cd72e531a/w/878fc491a42785d82498cb55/e/064565d4cb42445a2508380c?renderMode=0&uiState=65d98ad388897e5e82505ac5" rel="nofollow noopener">OnShape</a>.

Hose Adapters

Hydraulics

Wiseone

Yet another bag clip. Here is a useful bag clip that tightly closes a folded plastic bag or similar. This design is printed as a single part.My design does not use much filament and comes in three sizes. The three clip sizes included with clamping sizes of 60, 90 and 120mm, respectively.&nbsp;For heavy and wide clamping, I've included two versions of the 120mm clamp, 10 and 12mm wide. The 12mm wide clamp still flexes, but flexes less (my favourite).&nbsp;I experimented printing the clips in PETG and PLA+. Both gave what appeared to be quite pliable and usable clips. I did notice that the PLA+ got more brittle whilst clamping a bag in the freezer and breaking. In the end, it comes down to your intended use case. PETG being the most robust of the two filaments I tried.&nbsp;My prints are made with eSUN PETG 1.75mm Orange filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. No supports required.&nbsp;I hope that you can find this print useful, too.&nbsp;Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.&nbsp;UPDATES<ul><li>07/12/2023 Added 120mm x 10mm clamp.</li><li>02/02/2024 Added 120mm x 12mm clamp.</li></ul>

Bag Clip 10 (4 versions)

Kitchen

BamBam Design

<h3>Euro Coin Sorting Machine</h3>New functional update =&gt; Changelog @ bottom&nbsp;Money sorting machine for 0,01€-2€ coins.It sort automatic the 8 different € Coins for the external diameter.Simple throw the coins into the tube and lift the whole machine after all is sorted.Works like a charm!&nbsp;The Print is compatible with the USB Motor from Bambulab components kit 003 / 005 /007 / 009Its possible to turn the gear manually without attached motor as well!&nbsp;Works perfect as education toy for kids or just sort the money in your office.<ul><li>Easy Print.</li><li>Quick plug and play assembly</li><li>No screws or other tools needed, but feel free to secure! The option is there.</li></ul>Don&#39;t forget to like👍 and subscribe😉 and as always Happy Printing!&nbsp;<h4>Assembly:</h4>Before assemble check the holes are smooth, give the edges a little cut if they are to sharp.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148249/design/2024-01-20_dd6c12877025.webp"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148249/design/2024-01-20_8d55de3bd142b.webp"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148249/design/2024-01-20_211d402d3cd62.webp"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148249/design/2024-01-20_45608caa6aad.webp"></figure>Troubleshot:<ol><li>Make sure the holes where the coins fall down are not too edgy. Cut a little bit with a deburring tool if coins stuck.</li><li>Insert the coins first, than start the motor. In this way there should be no problems.</li><li>Keep in mind 50 cent has a greater diameter than 1€! Correct sorting order is 1ct/2ct/10ct/5ct/20ct/1€/50ct/2€</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148249/design/2024-02-19_2a7f3a7888ead.gif"><figcaption>1€ comes before 50cent</figcaption></figure>Change-log V1.2 (04.03.24) I gave the coins more tolerance / tuned the inlet of the tubes slightly ellipse. I hope that will help some users to get it work properly =&gt; Changes only on &#34;Base&#34; Part.V1.1 New Upgrade with additional Base with removable Tubes and some little Design changes!&nbsp;&nbsp;Disclaimer:This work by BamBam Design is licensed under Standard Digital File LicenseStrict non-commercial, personal use only license.You are not allowed to Remix or Copy this model to other 3D printing websites without my permission.&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Euro Coin Sorter - 003 Motor Compatible

Misc

MBRS

I saw many people used my other creation, the standard desk cable holder, as a way to tidy up passing cables. Since I believe that model is not optimal for that use, I created this version which fits various sizes of cables and in bigger quantities. It is also thinner which makes it ideal behind desks. The size is universal and is compatible with desks up to 40 mm in thickness (though if you have a thicker desk, nothing stops you from scaling Z a little bit).Screw is now optimized and scaled 97.5% from the original model. Should fit nicely with a slight effort on first assembly. Print is quick, about 40 mins, and only uses 18 g of plastic for both clamp and screw. PLA resists fine for me, but you're free to try stronger materials.Let me know if you like it! (Supports in the print profile are very easy to remove, they can be removed in one pull.) 05/01/24 FIXED TOLERANCES

OPEN Desk Cable Management Holder / Organizer 

CableManagement

skywolf

龙年特辑：新年剪纸合集

ChinaNewYear

LoboCNC

<figure class="image image-style-align-center image_resized" style="width:82.47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/273359/2023-12-16_isaae4wsbebc.gif"></figure>Rapid fire fun with this Gatling-style disc shooter. Shoot up to 5 discs per second, with a magazine capacity of 32 discs. Shoots up to 8 meters (or more?). Easy to print and assemble. Requires a rubber band to drive the firing pin. (Size 16 rubber bands work great.) Or use 2 or three bands in parallel for more power. The disc ammo prints up quickly - about 90 seconds per disc. The speed-load cap lets you pre-stack discs for quick re-loading.Please play responsibly, meaning: don't shoot at your siblings, pets, neighbors, etc. And don't use this outdoors. The discs will get lost instantly and are a potential hazard for wildlife, as well as becoming obnoxious litter.<figure class="media"></figure>Printing All parts should be printed in PLA with no supports. Print one piece each of the body, crank, firing pin, and snap ring. Print one or more of the cap pieces, as the spares can be used for quick re-load. Print lots and lots of the discs. I've also included a playing card target holder that you can print if you like.Assembly First apply a tiny dab of oil or light grease to the axle and cavity that holds the crank. Slide the crank onto the axle then clip the snap ring over the groove in the end of the axle. Note that the snap ring has a bevel one one side of the inner diameter. This bevel should face the crank.Next, slide the firing pin into the slot in the back of the body. Hook your rubber band over the hook on the end of the firing pin, slide it into the slot along the barrel, and then over the hook at the nose of the shooter. Test fire with a single rubber band before adding additional rubber bands.Operation Stack up to 32 discs onto the center core of the cap. Tilt the shooter upside-down and slide the cap into the ammo tube, pressing it into place. When shooting, rotate the crank forward with a continuous clockwise rotation until a disc is fired. Half cocking the firing pin will allow a disc to drop but potentially jam. Have fun, play safe!

Gatling Disc Shooter

Toys

3DPrintCess

I created this drawer dividers. Just print a few of them and then put them together crosswise so that they form individual compartments. This means you can choose the size of the compartments in your drawer yourself.&nbsp;The size of a single partition is 20 centimeters x 8 centimeters. The gaps are 3 millimeters wide and the height is 2.9 millimeters.&nbsp;They can be easily cut to fit exactly into almost any drawer.

Drawer Divider - create your own drawer compartments

DrawerOrganizers

Brian Dean

<h2>Embedded Magnet Dispenser Tool for Multiple Diameters and Thicknesses</h2><h3>PROFILE NOTE</h3>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.<h3>Latest Update (2024-04-21): Quick summary</h3><ol><li>additional magnet sizes</li><li>magnet size text embossed on the barrel and also included on the slider</li></ol>See below for the more detailed update notes.<h2>Magnet Dispenser for 3D Prints: Simplify Magnet Insertion with Precision</h2>The Magnet Dispenser Tool is expertly designed to streamline the insertion of magnets into 3D prints. This tool not only speeds the process of inserting magnets into 3D Prints, it also ensures correct orientation and secure fitting, making it ideal for projects that require precise magnet placement.<h3>Key Features</h3><h4>Dual Dispensers for Perfect Alignment</h4><ul><li>Includes two dispensers for each magnet size – one for north-up and one for south-up orientations</li><li>Use different colors (e.g., red for north-up and blue for south-up) to help easily identify the dispenser&#39;s orientation</li><li>Eliminates the hassle of misaligned magnets</li></ul><h4>Design and Utility</h4><ul><li>Developed after extensive refinement</li><li>Allows for friction-fit insertion and is also suitable for magnets that are glued</li><li>Tapered tip facilitates use in tight spaces</li></ul><h4>Ease of Use</h4><ul><li>The dispensers are designed to accommodate the specified magnet sizes for their internal holding magnets, but can dispense magnets of any thicknesses for the specified diameter. For example, for the 6x3mm dispenser, you will need 6x3mm magnets to assemble the dispenser, but once assembled, that dispenser can dispense any 6mm diameter magnet such as 6x1, 6x2, 6x3, 6x5, etc.</li></ul><h4>Convenience and Storage</h4><ul><li>Features a snap-on cap with an embedded magnet and a top slider magnet</li><li>Ensures secure storage and prevents accidental magnet spillage</li></ul><h4>Customization and Printability</h4><ul><li>No supports needed for printing</li><li>STL and STEP files included for personal customization</li><li>Compatible with PETG, PLA, ASA, ABS, etc</li><li>Adjust x/y hole compensation if needed for perfect fit</li></ul><h4>Visual Guide</h4><ul><li>Fusion 360 images provided for easy assembly and understanding of the internal mechanism</li></ul><h4>Use the Magnet Dispenser for a hassle-free, precise, and efficient magnet insertion experience in your 3D printing projects.</h4><h3>Supported Magnet Sizes</h3><h4>Dispensers are now provided for the following magnet sizes as of Version 5</h4><ol><li>2x1mm</li><li>2x2mm</li><li>2x3mm</li><li>3x1mm</li><li>3x2mm</li><li>3x3mm</li><li>4x1mm</li><li>4x2mm</li><li>4x3mm</li><li>5x1mm</li><li>5x2mm</li><li>5x3mm</li><li>6x2mm</li><li>6x3mm</li><li>7x2mm</li><li>7x3mm</li><li>8x2mm</li><li>8x3mm</li><li>8x4mm</li><li>9x2mm</li><li>9x3mm</li><li>10x1mm</li><li>10x2mm</li><li>10x3mm</li><li>12x2mm</li><li>12x3mm</li><li>15x2mm</li><li>15x3mm</li><li>20x2mm</li><li>20x3mm</li></ol>NOTE 1: The 1mm magnet thickesses are just too thin to work reliably with the friction-fit of the slider and caps. Therefore, I have made the pockets of the “1mm” thickness magnet dispensers to be that of the 3mm variety so that they work. So to assemble a 1mm magnet thickness dispenser, you will need to purchase a few 3mm thick magnets to assemble the dispenser. A 2mm thickness will likely work ok, too. Note that the text on the dispenser will still say “D x 1 mm” for the barrel, “Dx1” on the cap, and “D/1” on the slider, so you know what magnets you have loaded into it.&nbsp;NOTE 2: the above are the sizes needed to assemble the dispenser. The dispenser can still dispense any thickness of magnet as long as the diameter is the same. So if don&#39;t see your specific magnet thickness listed above, you can still print the correct diameter, assemble the dispenser with the correct magnet thickness, and dispense other thicknesses.&nbsp;STEP and STL raw files are included if you do not wish to use the provided profile.<h3>Quality Assurance Testing</h3><ul><li>All dispenser sizes have been printed by me and extensively tested</li><li>I have purchased all magnet sizes at significant expense to myself to ensure fit</li><li>Magnet diameters are tricky for press-fit tolerance and controlled by no less that 5 Fusion 360 parameters that must be balanced to achieve good fit<ul><li>Multiple iterations of each dispenser were printed and refined</li><li>Many kilograms of filament and hundreds of hours of print-time were consumed during this process</li><li>All to ensure the best quality printing and fit-up for each dispenser size</li></ul></li></ul><h3>About the Profiles</h3><ol><li>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</li><li>NOTE: The “Designer” profile is a single profile that contains plates for all magnet sizes so far. Please ignore the “total time” reported by MakerWorld for the profile. You only need to print the plate(s) that you need. Each plate takes about 2.5-2.9 hours on my X1C using the included “PETG” profile which is slowed down for good PETG layer adhesion and quality.</li><li>While the other profiles may be ok, their file / update version may be out of date. So if you want the latest sizes and model improvements, please choose the top “Designer” profile.</li></ol><h3>Accessories</h3>Be sure and check out some nice accessories that other folks have created to work with these dispensers.<ul><li>Tip Caps - these are nice caps for the dispensor tip. Not only do they help keep the magnets contained within, but they also protect the tip. Additionally, they are labeled with the magnet size, which is nice. Thank you @onegotowned ! <a target="_blank" href="https://makerworld.com/en/models/149038#profileId-162633" rel="nofollow noopener">https://makerworld.com/en/models/149038#profileId-162633</a></li><li>Vertical Workbench Stand - This is a very nice stand for select diamagers made by @nickramsey57. A number of folks have asked about stands / organizers for the dispensers, so this model will likely be useful to a number of folks. Thank you @nickramsey57 ! <a target="_blank" href="https://makerworld.com/en/models/206388#profileId-226561" rel="nofollow noopener">https://makerworld.com/en/models/206388#profileId-226561</a></li><li>Vertical Workbench Stand (parametric) - Here is another very nice stand made by @RevHazlett. You can specify the dispenser sizes that you want it to hold and then generate, making it customizable to your needs and the common magnet sizes that you use. Thank you @RevHazlett! <a target="_blank" href="https://makerworld.com/en/models/435087#profileId-340031" rel="nofollow noopener">https://makerworld.com/en/models/435087#profileId-340031</a></li></ul><h2>Update History</h2><h3>Version 5: 2024-04-21</h3><ol><li>Emboss the magnet size text on the Barrel (see photos), allowing one to view the size from the side, and also allowing one to print all of the barrels on a single plate and not get the barrels mixed up as to what size they are for.</li><li>Include the magnet size text on the Slider (see photos), allowing one to print all of the sliders and caps together on one plate and not get the sliders mixed up as to what magnet size they are for. Also provides additional text identification of the magnet size within.</li><li>Include 11 new magnet sizes:<ol><li>3x1mm</li><li>4x1mm</li><li>5x1mm</li><li>7x2mm, 7x3mm</li><li>8x4mm</li><li>10x1mm</li><li>15x2mm, 15x3mm</li><li>20x2mm, 20x3mm</li></ol></li><li>Re-organize the plates so that they are a little easier to manage. All dispenser sizes for each “diameter” are spread across three plates now - the Barrels, the Red Caps and Sliders, and the Blue Caps and Sliders. This allows one to “print-by-layer” instead of “print-by-object”, and the text also comes out better. Additionally, it is now easier to construct a plate with all of the size variations on 3 individual plates and print them all at once.</li></ol><h3>Version 4: 2023-12-26</h3><ol><li>Fixed an issue where the smaller diameter magnets such as the 2mm, 3mm, and possibly the 4mm magnet diameters could inadvertently slip through the vertical barrel slider stem slot. Prior to this update, the slider stem was a fixed 3mm + tolerance width. With Version 4, the slider slot is now dynamic based on the magnet diameter. So now, the smaller diameter magnets are captive within the barrel and cannot slip out inadvertently.</li><li>Tighten up the tolerances between the “slider” and the “barrel” for a better fit and smoother operation.</li><li>Use the Profile: “Version 4: All Sizes …” for the latest from this update.</li></ol><h3>Version 3: 2023-12-22</h3><ol><li>Added additional magnet sizes<ol><li>2x1mm, 2x2mm, 2x3mm</li><li>9x2mm, 9x3mm</li></ol></li><li>Text is now added within the Fusion 360 Model File, eliminating the need to add the text using Bambu Studio<ol><li>Ensures consistent text placement and easier colorizing of the text</li></ol></li><li>All plates are included for all magnet sizes, two dispensers per plate, print sequence: print-by-object</li></ol><h3>Version 2.1: 2023-11-28</h3><ol><li>Added additional magnet sizes<ol><li>3x2mm</li><li>4x2mm, 4x3mm</li><li>5x2mm, 5x3mm</li><li>6x2mm</li><li>8x2mm, 8x3mm</li><li>10x2mm, 10x3mm</li><li>12x2mm</li></ol></li><li>The magnet size text is included on the cap for easy identification - see photo</li></ol><h3>Version 2: 2023-11-20</h3>Updated to “Version 2”. Significant updates an enhancements have been made, some seen, some unseen.<ol><li>Added additional magnet sizes<ol><li>3x3mm</li><li>12x3mm</li></ol></li><li>Each magnet size is on its own plate, two dispensers per plate, print sequence: print-by-object</li><li>Redesigned “thumb slider” for greater comfort and stronger press force</li><li>Slider stem has been reinforced</li><li>Many enhancements for smoother operation with internal chamfers and fillets, enhanced tolerances, and strengthening of key internal components</li></ol>&nbsp;&nbsp;&nbsp;

Embedded Magnet Dispenser Tool for 3D Prints

Gridfinity

Kubikossi

<h2>New Universal Spool v2 released! <a target="_blank" href="https://makerworld.com/de/models/125311#profileId-135347" rel="nofollow noopener">Click here</a>!</h2>&nbsp;Universal spool for using filament on cardboard spools or Refill Packs (like eSun Refill Filament) in the Bambu AMS. No rewinding necessary, simply transfer the cardboard or refill core to the universal spools. Suitable for core diameters (inside) from 75 to 100mm. With Jayo spools, it is a little tricky to remove the rather thick ring at the core. You need a sharp cutter and patience.<a target="_blank" href="https://youtu.be/YNShKH9P1Qs?si=-JpmYJoZzH9Go-eM" rel="nofollow noopener">Check out my new video with a steb by step tutorial.</a><ol><li>Measure the width of the cardboard spool (inside between the reels). </li><li>Carefully remove one side of the cardboard spool. </li><li>Screw the corresponding core (50, 55 or 60mm width) onto a reel and insert it into the cardboard core.</li><li>Then turn over and remove 2nd side of cardboard reel.</li><li>If desired, then insert Silicatube (with silica gel or ballast).</li><li>Then screw on second roll, done.</li></ol>Now the filament can be used in the AMS without any problems. I made 2 designs of the reels, design nr. 2 needs less printing time. I use PLA (it is flexible enough for the core) with these settings: 3 walls 3 top and bottom layer 12% Gyroid Infill 0,16mm layerhigh (with variable layerhigh for the reels if you want)&nbsp;22.11.2023&nbsp;added the new v2 Cores (as Print Profile)<figure class="image image_resized image-style-side" style="width:37.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/797328/2023-11-22_2f2f7f0bccecd.jpg"></figure> The number of spiral arms was reduced from 4 to 3, while the diameter was increased from 110 to 117 mm. This means that the spools sit even better and less material is used, which also reduces the printing time slightly.&nbsp;The v2 Core with 60mm was tested by me with various filament and is therefore compatible with the following cardboard spools:<ul><li>Creality</li><li>eSun</li><li>GratKit</li><li>Kexcelled</li><li>Overture</li><li>Sunlu</li></ul><figure class="image image_resized image-style-side" style="width:37.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/797328/2023-11-22_61966bfd41a5d.jpg"></figure>&nbsp;Not yet tested, but should fit:<ul><li>Eryone</li><li>Bambu Lab Refill</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;17.10.2023 <ol><li><a target="_blank" href="https://makerworld.com/en/models/43852#profileId-45166" rel="nofollow noopener">new rewind core</a>. With this new core it is now possible to rewind filament with my universal spool, e.g. from a cardboard spool or a 3kg spool.</li></ol>&nbsp;02.10.2023<ol><li>added a &#34;Core Jayo 85-55&#34; especially for Jayo Spools. It&#39;s slightly smaller than the normal 100-55 Core.</li><li>reworked the silica-top, the thread now runs more easily.</li><li>updated the 3mf-File</li></ol>

Universal Spool for Bambu AMS

PrintingAccessories

Enly1

Modified for 608 bearings instead of the smaller ones used as didn't have any available and only really use 608's.&nbsp;Reworked Rollers, Base Structure / Roller Offsets and used Pins for the roller mounts to make things simpler and more stable.&nbsp;Base slightly widened to support pins and add a little more structure and the mount for the hygrometer now has retaining ears to stop it tilting forward in the boxes I use.&nbsp;Only modified parts included in this upload - please source sub-base and desiccant container from original linked model.&nbsp;Origin Model for parts and kudos: <a target="_blank" href="https://www.printables.com/model/602303-filament-dry-box-with-hygrometer" rel="nofollow noopener">https://www.printables.com/model/602303-filament-dry-box-with-hygrometer</a>

Filament Dry Box with hygrometer - 608 bearing version

Drybox

wuguigui

<h2>Summary</h2>I designed a 3D print clip without spring, the separated jaw mouth could be optionally chosen according to different usage.This design had another important function is to put pressure on the jaw mouth constantly, so it will not be loose like other 3D print clips.I recommend PETG as the filament because it has better toughness, not bad when using PLA+. But I haven't tried ABS yet, someone could help to do it.If you like it, please click "like“ it:)Thank you!A new one was designed based on this clip, with suction cup: <a target="_blank" href="https://makerworld.com/en/models/12904" rel="nofollow noopener">https://makerworld.com/en/models/12904</a><h2>Print Settings</h2>Printer: snapmaker 2.0 A250 Rafts: No&nbsp;Supports: No Resolution: 0.2&nbsp;Infill: 60% Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=snapmaker+PETG+or+PLA%2B" rel="nofollow noopener"> snapmaker PETG or PLA+ </a> any

Clip

Clips

Twotone74

This is my first try to make a parametric model, this means you can change the model's size by changing a parameter. For this you have to open the .f3d-file in Fusion360. Then go to the “Modify”-menu and click “Change Parameters”.<figure class="image image_resized" style="width:63.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/163614/2023-11-12_o673m1zpl4jx.png"></figure>&nbsp;There you can change the parameter for the diameter of the rope. <figure class="image image_resized" style="width:96.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/163614/2023-11-12_12yylq9ab1dh.png"></figure>&nbsp;The diameter has to be at least 3.1mm, otherwise the calculation will fail. Don't touch the "Tolerance"-Parameter. &nbsp;For those that are not familiar with Fusion360 I uploaded the model in sizes from 3-12mm rope diameter.

Adjustable Rope Clamp Rope Tensioner (Parametric)

Ropes

sfr1at

A small stackable desk shelf to organize a network switch or various other small devices on a desk.&nbsp;Overall Sizes: Width: 245mm Depth: 150mm Height: 175mm&nbsp;Compartments inside dimensions: Width: 230mm Depth: 150mm Height: 60mm&nbsp;Foot height: 30mm&nbsp;Update: 30.12.2023There is now a second version with the middle level missing so that higher devices can be stored.

Stackable desk shelf

Furniture

Marc Elbichon

Update 2024-01-03: Added 5.5mm versions (big handle)Update 2024-01-02: Added 1.25mm, 3.5mm and 4.5mm versions (small handle)&nbsp;After a lot of work, here is my Ultimate T-Handle Hex Key set, designed in 9 common sizes (1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm)<ul><li>SAE version is available here : <a target="_blank" href="https://makerworld.com/en/models/81110" rel="nofollow noopener">https://makerworld.com/en/models/81110</a></li><li>Torx version is available here : <a target="_blank" href="https://makerworld.com/en/models/239133" rel="nofollow noopener">https://makerworld.com/en/models/239133</a> </li><li>Stand available here : <a target="_blank" href="https://makerworld.com/en/models/78304" rel="nofollow noopener">https://makerworld.com/en/models/78304</a></li></ul>Print in place, no glue required, handles knurling gives a nice feeling in the hand.&nbsp;It's made to be tight, to avoid the key to move, it should be easy to assemble, but if it is a little hard to screw (example with coated keys, which is a little bigger), a drop of grease or oil on the thread could help.&nbsp;There is 2 handle sizes : One small for allen key from 1.5mm to 4mm and a large for 5mm to 10mm&nbsp;Give your feedback and post your makes, enjoy!&nbsp;PS : Feel free to ask other sizes&nbsp;

(Metric) Ultimate T-Handle Hex Key Set

Tools

Knurled handle for M3-M8 Hex Nut<ul><li>Fits perfect ISO 4032 / DIN 934 Screws</li><li>Good little handle for little force</li><li>For M3, M4, M5, M6 and M8</li><li>Add a bit of glue to secure or use it as a tool</li></ul>Check out the perfect match screw handle design: <a target="_blank" href="https://makerworld.com/models/74557" rel="nofollow noopener">https://makerworld.com/models/74557</a><a target="_blank" href="https://makerworld.com/models/74557" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/770445/2023-11-26_86e644c72618d.png"></a>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Knurled handle - M3 to M8 Nuts

ScrewsNutsBolts

K2_Kevin

<h2 style="text-align: center">Bambu Labs 6 Piece Tool Set</h2><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener">NEW LABELED Version now available HERE!</a><img class="image_resized" style="width: 33.01%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_cafe0726686af.png"><figure class="table" style="width: 100%"><table class="ck-table-resized" style="background-color: hsl(90, 75%, 60%); border: 4px groove hsl(120, 75%, 60%)"><colgroup><col></colgroup><tbody><tr><td style="text-align: center">Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!</td></tr></tbody></table></figure><figure class="table"><table style="border: 2px solid hsl(0, 0%, 60%)"><tbody><tr><td>Included Tools:<ul><li>AMS Power Cable Disconnect - Pushes the hidden clip that is facing printer on the AMS Buffer &amp; Hub.</li><li>AMS HUB PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Hub (Smaller than Buffer)</li><li>AMS BUFFER PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Buffer (Larger than Hub)</li><li>Buffer Outlet Fork - Fits between spring (through the slot, no need to remove buffer/hub) and slide/push on the PTFE coupler in the AMS Buffer/Hub. Also works great for PTFE removal on hotend and AMS.</li><li>2x Hotend Wire Disconnects - If you need a helping hand removing the Bambu Hotend/Nozzle Connectors.</li></ul></td></tr></tbody></table></figure>&nbsp;If you want to up your cool game, use 6x3mm Magnets. Pay close attention to the magnets polarity (all bottoms face same direction/polarity). They&#39;re designed to fit magnets snugly, but you might need a little glue for some of them.<h3>NEW TOOL SET HOLDER: <a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener">https://makerworld.com/en/models/105024#profileId-112080</a></h3><figure class="table"><table style="border: 2px dashed hsl(0, 0%, 90%)"><tbody><tr><td>Example usage:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/bda22def-b638-4952-8963-d468f39e906e.webp"></td></tr></tbody></table></figure>&nbsp;<h3>Checkout some of my other models…</h3><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener">https://makerworld.com/en/models/478965#profileId-390252</a><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener"><img class="image_resized" style="width: 52.2%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-06-03_450eebd518686.png"></a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener">https://makerworld.com/en/models/472091#profileId-381848</a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener"><img class="image_resized" style="width: 52.84%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_20146411d27.png"></a><a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener">https://makerworld.com/en/models/105024#profileId-112080</a><a target="_blank" href="https://makerworld.com/en/models/105024#profileId-112080" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-05-30_853680d87f4e1.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/81622#profileId-86911" rel="nofollow noopener">https://makerworld.com/en/models/81622#profileId-86911</a><a target="_blank" href="https://makerworld.com/en/models/81622#profileId-86911" rel="nofollow noopener"><img class="image_resized" style="width: 52.89%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-01-25_2082d4a4681bf.png"></a><a target="_blank" href="https://makerworld.com/en/models/131156#profileId-142275" rel="nofollow noopener">https://makerworld.com/en/models/131156#profileId-142275</a><a target="_blank" href="https://makerworld.com/en/models/131156#profileId-142275" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-06-03_f618df312f7da.png"></a><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166673" rel="nofollow noopener">https://makerworld.com/en/models/152636#profileId-166673</a><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166673" rel="nofollow noopener"><img class="image_resized" style="width: 52.7%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014462/design/2024-01-25_de1a3154efbf3.png"></a>&nbsp;&nbsp;&nbsp;This original disconnection tool inspired an entire line: https://www.printables.com/model/382058-bambu-ams-disconnect-tool

Bambu Tools - Bambu Lab Tool Set -Disconnect Tools

Bambu Addons

iPushPolygons

Bed plate (5) holder for the Bambu Lab X1 that mounts nicely to the Honeycomb Storage Wall.