ReSyncc

Dutch3d

A deckbox made for commander decks.&nbsp;MTG Logo at underside of the lid can be removed if you like.

MTG Commander deckbox

deck boxes

Every Day Counts

Well, Hello there big boy!&nbsp;Here is a fun bin designed for the desk or underneath the desk. It's pretty large at 185mm wide x 210mm deep and 260mm high. That's around 7.25" x 8.25" x 10.25" for the old skoolers.&nbsp;This design is for experienced printers that have it all together. Don't make this your first print after getting your printer.&nbsp;Don't try and scale it down - it's not going to work. Give me a bad rating for not working when scaled down, and then I will growl at you.&nbsp;This is a LARGE print. It's going to take around 780 grams of filament. That's the price you pay for such things. No grizzling. Talk to Apple in 1984 for the design if you want to grizzle.&nbsp;The front flap works best with some springs. I designed it for and used 8.5mm x 36.5mm extension springs. You may be able to get it to work with something similar or even some rubber bands. Give me a bad rating because you printed it out and then realised that you will need springs, and then I will shame you publicly.&nbsp;The front panel requires a fair bit of support underneath. It will come off very simply, but you must take care. A small flathead screwdriver and some side cutters will be required. Write a lousy comment stating that it was hard to remove the support; then, you can design your own models in the future. Instructions:<ul><li>Remove the support from underneath the front panel. Take care not to damage the attachment points, and be sure to clean out every last bit you can see. Special attention is needed for the flap attachment. </li><li>Add the badge to the front panel using a dab of superglue. If you are anti-Apple, then don't. I won't mind.</li><li>With the main body, clean the brims (if any)</li><li>With the top lid, clean the brims away (you have a burr removal tool, right?)</li><li>Attach one end of the springs to the front flap before attaching it to the front panel.</li><li>Slot the flap into the front panel at 90 degrees, and once fully in, swing it downwards.</li><li>Attach the other end of the springs to the front panel and then arrange them so they do not interfere when the flap swings inwards.</li><li>Place the main body on a desk on its back.</li><li>Locate the front panel onto the main body clips, then gently press them together from above. Wow, that feels good.</li><li>Stand it up and fit the lid! Cool, eh?</li><li>Show it to someone else.</li></ul>&nbsp;If you managed all of that, I am proud of you!&nbsp;To allow me to do more like this, please give me a thumbs up, collect it, and then write a really nice comment. My rating suggestion is five stars. Anything else will be an insult, and I will sulk for days.&nbsp;

Retro Apple Mac Trash Can

just cool

MTKDesigns

This model is the Original Jordan 1&nbsp;&nbsp;&nbsp;The supports on the bottom are a little time consuming to remove.  I hit it with the orbital sander for a min or 2 with 80 grit and then again with 320 and it will smooth out.  &nbsp;***NOT for commercial use***I have had a LOT of interest in a  Commercial license on these.  I have created a Patreon just for this purpose.<a target="_blank" href="http://patreon.com/MTKDesign" rel="nofollow noopener">patreon.com/MTKDesign</a>

Nike Air Jordan 1 (Original Uploader)

cool gifts

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;A <a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16764" rel="nofollow noopener">base/diorama builder</a> is now available for download for this mini figure model!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018045/design/4fb50df1-8c36-4d0c-88ec-bcc8e5122b9c.jpg"></figure>___________<h3>IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS</h3>Please note that I am sharing my designs to any one to enjoy but for personal use only. I have NOT provided any commercial license to any one allowing the sale of 3d printed copies of my designs. Seeing my designs being sold for profit is discouraging for me to continue coming up with more designs. I will not hesitate to report to Etsy and other online sites if I find them being sold.__________This is a kit card of Minecraft Turtle in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)<h4>Usage Options</h4><ol><li>Assemble as is and use as toy/collectible; or</li><li>Use the alternative part with loop and glue the halves together to make for a great keychain ornament!</li></ol><h4>Printing Reminders</h4><ul><li>Print as oriented, with NO supports needed.</li><li>If you&#39;re printing in multiple colors, please note that due to several color swaps, it would take longer to print.</li></ul><h4>Difficulty Level (Easy, Medium, Hard)</h4><ul><li>Printing: Medium - Bed should be leveled well to ensure small parts stick well to the build plate. Requires printing slower during the first few layers. May require lots of filament swaps if printed in multi-color.</li><li>Assembly: Easy - Parts should fit really easy. The flippers are intentionally designed to be loose and wiggly. See pictures for correct orientation of the flippers.</li></ul>

Minecraft-inspired Turtle Mini Figure Kit/Keychain

Gifts

maxaruta

This photobox features a 360-degree rotating base, which allows you to take photos from any angle. It is also fully customizable, thanks to the variety of wall styles available. With my photobox, you can significantly improve the perceived quality of your products to your customers. Your photos will be more professional and engaging, and your customers will be more likely to purchase them. Download the model today and start taking professional photos of your creations! _____________________________ Ti presento la mia nuova photobox, lo strumento perfetto per creare fotografie professionali delle tue stampe e creazioni.&nbsp;Questa photobox è dotata di una base d'appoggio ruotabile a 360 gradi, che ti permette di scattare foto da qualsiasi angolazione. Inoltre, è personalizzabile al massimo, grazie ai vari stili di pareti disponibili.&nbsp;Con la mia photobox, potrai migliorare notevolmente la qualità percepita dai tuoi clienti dei tuoi prodotti. Le tue foto saranno più professionali e accattivanti, e i tuoi clienti saranno più propensi ad acquistarli.&nbsp;Scarica il modello subito e inizia a scattare foto professionali delle tue creazioni!

Photobox: Take professional photos of your creations

Photography

lukasglowinski

Lately I have discovered the BambuLab swatches. They are great way to display your filament samples. But what if you have a lot of different filaments from many different brands? In no time you will have the swatch plate full and you will need another one and yet another. That's why I came with an idea of making the swatch plates organizer/case. When printed you will need 4 M3x16mm socket cap screws to put the casing together. The swatch plates will slide nicely in the organizer. You can use original BambuLab swatch plates, but I've also made my version with tabs witch allow for better/easer sliding in and out of the caseing. And also have type of filament writen on them. I've uploaded the step files for my version of the plates so you can moddify and add your own types of filament or if you want arange your filament by brand you can put the brand name on the tabs.Use an accent colour for the names on the tabs if you want them to stand out even more.&nbsp;On request added 5 swatch plates with blank tabs (stl) for the ones who want add own text in the bambu studio slicer.Check out the bigger version of this design <a target="_blank" href="https://makerworld.com/en/models/135375#profileId-146917" rel="nofollow noopener">Bigger case/organizer for Bambu lab swatches</a>

Case/organizer for Bambu Lab swatches

3D printing tools

JS Printing

I found this Japanese Lantern model on Printables: <a target="_blank" href="https://www.printables.com/model/318894-japanese-garden-lantern-lamp" rel="nofollow noopener">https://www.printables.com/model/318894-japanese-garden-lantern-lamp</a>&nbsp;I immediately fell in love with it. This upload includes the settings tweaks I've used to ensure a high quality print. The lantern is scaled down to fit on to a single plate but it can easily be scaled up to larger sizes. Details like the lattice structure on the middle section and the tiling on the top section are particularly hard to print in high quality. Hopefully these print settings help. &nbsp;Of special note, make sure the PLA used for this print is bone dry. Any humidity the filament has absorbed will cause the top section to string like crazy as the small motions along the outside perimeter of the top section involve a ton of rapid, small movements back and forth. &nbsp;Put a small tealight LED candle in it and enjoy the ambiance!

Japanese Lantern

lighting

DonMatis

Would you choose to pass the portal that leads to another dimension?&nbsp;Filament painting made by HueForge. This model contains black background to promote the rest of the design.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<ul><li>PLA Overture Black</li><li>PLA PolyTerra Charcoal Black</li><li>PLA Overture Cement Gray</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray</li><li>PLA PolyTerra Cotton White</li><li>PLA Overture White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #7 (0.64mm) swap to Charcoal Black</li><li>At layer #9 (0.8mm) swap to Cement Gray</li><li>At layer #11 (0.96mm) swap to Gray</li><li>At layer #14 (1.2mm) swap to Light Gray</li><li>At layer #18 (1.52mm) swap to Cotton White</li><li>At layer #22 (1.84mm) swap to White for the rest.</li></ul>

Portal

Jorge Rui

<h3>Introduction</h3>This organizer is composed of two large blocks that are connected in a seamless way.<ul><li>The different modules can be used however you want. With several recesses, it allows you to store small things without them falling and be quickly accessed.</li><li>I added an Apple phone charger, but it can easily be adapter for other models. the module above it, are for USB-A & C cables and pens.</li><li>Other modules are movable to facilitate their cleaning, namely those where I place the pencils. And the 3 front left pockets, I've made them for post-its </li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3059492201/draft/2023-08-23_f8gmtah4w4oa.jpg"></figure>The assembly is very simple, just fit the two bases that will be connected with the notches.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3059492201/draft/2023-08-23_f0qc2k2xarnr.jpg"></figure><h3>Print instructions.</h3>And again, the design is simples, and the printing is simple. the lids will need supports on the external contour lip. <h3>Notes:</h3>I'm printing it at this exact moment. The parts at the momento ar all excelent (they are NOT complicated, so I don't expect any print problems)<h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a href="https://www.buymeacoffee.com/designrepcom" rel="nofollow">buymeacoffee </a>or <a href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.

Office desktop module

Organization

Haydn Bao

<h3>👉All 3mf's include individually optimized profile and material settings for Bambulab printers.</h3>The Modular Attached Storage Stack (<a target="_blank" href="https://modcase.com.au/products/nas?variant=43668432584952" rel="nofollow noopener">link</a>) is a compact 3D printed NAS enclosure with expandable storage support. Delivered by instant download, MASS is a digital product of ready to print files with limitless color options, unlimited spare parts and ongoing updates!<h4><a target="_blank" href="https://drive.google.com/file/d/1wRKaiGE79QRi65ESduj2JVp_4RWADkE1/view?usp=sharing" rel="nofollow noopener">MASS_Instructions.pdf</a> (v1.1)</h4>Enjoy. Like and follow for more cool stuff!&nbsp;Haydn BaoDesigner<h2>Features</h2><ul><li>Modular Body Stackable Drive expansion up to 10x 3.5” + 3x 2.5” drives.</li><li>Fully 3D Printable unlimited colors, spare parts, instant digital delivery and downloadable updates.</li><li>Vertical design Minimal foot print with straight up airflow.</li><li>Customizable Official MODs and optional mounts.</li><li>Simple assembly consolidated parts and 1 screw type for all.</li></ul><h2>Specifications</h2><figure class="table" style="width:38.13%;"><table class="ck-table-resized" style="border:1px dashed rgb(204, 204, 204);"><colgroup><col><col><col></colgroup><tbody><tr><td> </td><td>MASS PREMIUM</td><td>MASS FREE</td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Drive Bays</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">Up to 10x3.5” + 3x2.5"</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">4x3.5”+ 3x2.5"</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">PCI-E Slot</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">1 Slot Low-Profile</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">NA </td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">PSU</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">SFX, SFX-L, FlexATX</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">SFX, SFX-L</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Fans</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">4x 140mm or 120mm</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">3x 140mm or 120mm</td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">CPU Cooler</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">66mm tall</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">55mm tall</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Printer Requirements</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">Min. Bed 210x210mm 240°C Nozzle</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">Min. Bed 200x200mm 240°C Nozzle</td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Core Size (APU)</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">210x199x162mm 6.7L</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">203x199x151mm 6.1L</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Bay Module</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">199x162x150mm 4.8L</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">199x150x150mm 4.5L</td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Motherboard</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">ITX</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">ITX</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Material</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">1-2kg PETG</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">1-2kg PETG</td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Handles</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">Low profile and standard options</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">NA</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Display Mod</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">Top or Sides (Labs feature)</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">NA</td></tr><tr><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Additional 2.5" Bays</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">Optional mounts for 2x2.5" drives in a 3.5" bay</td><td style="background-color:rgb(245, 245, 245);border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">NA</td></tr><tr><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:155.729px;">Mechanical PBT</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.125px;">Optional: use keyboard switch as power button.</td><td style="border:1px solid rgb(204, 204, 204);padding:4px !important;width:183.146px;">NA</td></tr></tbody></table></figure><h3>Required to complete</h3>Screws: M3x20 (40pcs) - <a target="_blank" href="https://www.aliexpress.com/item/1005003981975435.html?pdp_ext_f=%7B%22sku_id%22:%2212000027634066519%22%7D" rel="nofollow noopener">Link</a> Power Button: Ø16mm - <a target="_blank" href="https://www.aliexpress.com/item/1005003623296396.html?pdp_ext_f=%7B%22sku_id%22:%2212000026547329693%22%7D" rel="nofollow noopener">Link</a>&nbsp;<h3>Download backups: </h3><a target="_blank" href="https://drive.google.com/file/d/1wRKaiGE79QRi65ESduj2JVp_4RWADkE1/view?usp=sharing" rel="nofollow noopener">MASS_Instructions.pdf</a> (v1.1)<a target="_blank" href="https://delivery.shopifyapps.com/-/9ae7a4af5f0c2fe7/0d88a691b57bec15" rel="nofollow noopener">MASS_FREE.zip</a> (v1.1)<h2>FAQ</h2>▶How much does it cost to print?1-2kg of filament. MASS is tested on generic PETG. You can typically find 1kg rolls for $13/kg each (<a target="_blank" href="https://www.ebay.com.au/itm/155179063326" rel="nofollow noopener">Link</a>), $12/kg if you buy 4 (<a target="_blank" href="https://www.ebay.com.au/itm/155179063326" rel="nofollow noopener">Link</a>), $10/kg if you buy 10 (<a target="_blank" href="https://www.ebay.com.au/itm/133654876065" rel="nofollow noopener">Link</a>). &nbsp;▶Premium vs Free difference?Premium has PCIE slot support, holds 5 drive per caddy, supports up to 13 drives, has handles, extra 2.5” drive adapters, Flex PSU bracket, addon Fan modules and ongoing updates. It supports development of more awesome designs.&nbsp;▶Can Free version use premium modules?No. MASS Free Version was the original model without PCIE slot, making it slimmer by 11mm on the width of the tower, and thus not compatible with the PCIE equipped Premium model.MASS Free is still a potent enclosure with 4x3.5” bay support and can technically stack up to 8 drive bays using M.2 HBA.&nbsp;▶Is MASS durable?MASS is built with an intimate understanding of the non-anisotropic strength properties of FDM. The parts are appropriately designed to overcome layer splitting issues by orientation and print settings. MASS development is committed also to ongoing improvement to ensure it is a durable and reliable option for your NAS setup.&nbsp;▶How to connect more than 4 drives?To expand the beyond the 4 sata ports on most ITX motherboards, you can install a Low profile <a target="_blank" href="https://amzn.asia/d/0uUTo9h" rel="nofollow noopener">PCIE SATA card</a> on the premium model. You can also use an <a target="_blank" href="https://www.aliexpress.com/item/1005004417694518.html" rel="nofollow noopener">m.2 SATA controller</a> to add a few more.

MASS - Stackable NAS ITX Enclosure

PC/Server

hitcha

These print in place bearings take 23 minutes and can be printed to understand the engineering and how ball bearings work or they can be printed for a fidget toy!&nbsp;I recommend the print profile "<a target="_blank" href="https://makerworld.com/en/models/17245#profileId-33465" rel="nofollow noopener">Optimised 💯 [PETG], Concentric Circular Pattern, 0.2mm layer, 1 walls, 50% infill</a>" for people having trouble with original print profile.&nbsp;I recommend the print profile "<a target="_blank" href="https://makerworld.com/en/models/17245#profileId-36224" rel="nofollow noopener">High Strength💪 & Faster Spin⚡️, 0.2mm layer, 1 walls, 60% infill</a>" for people who want the bearings to be much stronger and spin for longer.&nbsp;I recommend the print profile “<a target="_blank" href="https://makerworld.com/en/models/17245#profileId-36240" rel="nofollow noopener">High Strength💪 & Multicoloured🌈, 0.2mm layer, 1 walls, 60% infill</a>” for people who want the bearings to be multicoloured :)&nbsp;If you wanna purchase all the files including all the Solidworks Part, Engineering Drawing and STL files, here’s the links:<a target="_blank" href="https://www.cgtrader.com/products/print-in-place-ball-bearings" rel="nofollow noopener">https://www.cgtrader.com/products/print-in-place-ball-bearings</a><a target="_blank" href="https://cults3d.com/en/3d-model/game/print-in-place-ball-bearings" rel="nofollow noopener">https://cults3d.com/en/3d-model/game/print-in-place-ball-bearings</a>&nbsp;<a target="_blank" href="https://www.youtube.com/@amelia.hitchcock" rel="nofollow noopener">https://www.youtube.com/@amelia.hitchcock</a><a target="_blank" href="https://www.cgtrader.com/hitcha" rel="nofollow noopener">https://www.cgtrader.com/hitcha</a><a target="_blank" href="https://cults3d.com/en/users/hitcha" rel="nofollow noopener">https://cults3d.com/en/users/hitcha</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/17245#profileId-33465" rel="nofollow noopener">Print In Place Ball Bearings </a>© 2023 by <a target="_blank" href="https://makerworld.com/en/u/2258409675" rel="nofollow noopener">hitcha (Amelia Hitchcock) </a>is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by-nc-nd/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY-NC-ND 4.0</a><figure class="media"><div data-oembed-url="https://youtu.be/XyX0R2AW-aY"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/XyX0R2AW-aY" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/_4YW_2NRJW8?si=ZnAQK_jBEy_lOv9P"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/_4YW_2NRJW8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtube.com/shorts/1HCrpLnZFOc?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=1HCrpLnZFOc"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/1HCrpLnZFOc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;