Raginghomobear

Gillithonnen

A colorized model of Duskull with a magnetic base.&nbsp;You will need the following magnets:<ul><li>Two 10x2mm magnets</li><li>Two 8x2mm magnets</li></ul>Source Option: <a target="_blank" href="https://www.amazon.com/dp/B0B2LZJ5GL" rel="nofollow noopener">6, 8, and 10x2mm combo on Amazon</a>&nbsp;They should have a snug fit, but there is room to add super glue if you want.&nbsp;Filaments used in the colorized model (as they appear in the 3mf):<ol><li>Bambu Lab PLA Basic - Gray (10103)</li><li>Bambu Lab PLA Matte - Scarlet Red (11200)</li><li>Bambu Lab PLA Matte - Sakura Pink (11201)</li><li>Bambu Lab PLA Basic - Jade White (10100)</li><li>Bambu Lab PLA Basic - Black (10101)</li></ol>

Duskull Pokémon

Jodys

V3 Precision

This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer. This is a larger sized container than my other design.The poop chute uses a two magnets (0.5 inch diameter, 0.10 thick). The mounting hole for the magnets are cut oversized (0.51 diameter) for an easy fit. Might need to super glue the magnets in place.The cutaway o n the size serves two functions. It gives you a recessed handle to grip the poop chute when taking it off. The angled top of the cutaway helps direct the waste filament across the chute. Helps to keep the filament from bunching up directly beneath.&nbsp;Filament - I used PLA+ or PLA Carbon FiberSupport - Yes; Hybrid, AutoLayer - 0.2mmInfill - 15%3mf file using Bambu Lab Studio (slicer)&nbsp;UPDATE:The design was updated to accommodate the feet added to the X1, X1C, P1P, and P1S.The new design is poop_shoot_L_magnetic_V2&nbsp;You can find a finished Poop Chute with the magnets on our website www.v3precision.com.

Jodys

Aarons