Quiztastic

snjames316

IntroI was tired of looking for a generic modular setup for Socket trays that you could swap sizes and completely customize on the fly when adding a new socket (or losing one). So I made a simple model and expanded it to fit any possible size(outside of oversized) and am self dubbing it the Gridfinity Universal Socket Trays (G.U.S.T). This setup was not build to maximize space, but instead to maximize visibility and simplicity by being able to reorganize at any point in time without the need to reprint everything. Enjoy rate and let me know if there are any issues not noted below. If you find you need a specific size I don&#39;t have in here, let me know. Lastly let me know if there are any improvements you would like to see made. &nbsp;Links to the full G.U.S.T. setsI don&#39;t usually like it when people put all their “check out my models here” but by (an unexpected) amount of demand, here are the links to ONLY the models related to the G.U.S.T. sets to help users navigate to the other sets directly online or in the app,&nbsp;<a target="_blank" href="https://makerworld.com/en/models/493996#profileId-407884" rel="nofollow noopener">Standard short sockets of 12-36mm diameter</a><a target="_blank" href="https://makerworld.com/en/models/495122#profileId-409200" rel="nofollow noopener">Deep sockets up to 68mm in height and 12-31mm in diameter</a> (Will be adding up to 39mm soon)<a target="_blank" href="https://makerworld.com/en/models/502884#profileId-418220" rel="nofollow noopener">the Deeper sockets up to 100mm in height and 12-39mm in diameter</a><a target="_blank" href="https://makerworld.com/en/models/495080#profileId-409150" rel="nofollow noopener">Label inserts for all three sets</a>&nbsp;Model Features<ul><li>These holders will fit any socket set since you measure your own sockets and print the appropriate tray pieces</li><li>The tray system is based on the Gridfinity standard and will fit all standard Gridfinity bases</li><li>on the bottom of the trays, I included the standard 6x2mm magnet inserts. This helps keep the tray from coming out of their spot in the grid if you slam your tool drawers like I do</li><li>The optional label system designed was made to be very simple. Doesn&#39;t require magnets, Stays secure even when slamming the tool drawers.</li><li>NO Guess work needed, when sizing out you entire socket collection</li><li>Got extra random sockets? Print one off socket trays for each one to store in the corner of your drawer</li></ul>Instructions<ol><li>download and open the profile in Bambu studio  </li><li>Take note of the current socket height. If this height is taller than or equal to 100mm…..sorry. I didn&#39;t design a universal set for DEEEEEEEEEP sockets yet. If you have a set that is more than 100mm in height. leave me a comment or a message of what size your socket is and I&#39;ll start working on an addition to the sets.  </li><li>measure your Socket diameter (do not use the socket size printed on the socket as the size you use to select a tray) This set is 12-39mm diameter by up to 99.9mm in length <img class="image_resized" style="width: 16.5%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000502884/design/2024-06-19_ae731cfec37d2.jpg">  </li><li>round the diameter up to the nearest whole number (ex. like the above, anything between 17.01-18.00mm goes to 18mm)  </li><li>Add a new empty plate and select it <img class="image_resized" style="width: 27.19%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000502884/design/2024-06-19_88b1516efebf6.png">  </li><li>Right click on the model for the needed size (in this ex. its 18mm) and hit clone, it should clone to the selected empty plate <img class="image_resized" style="width: 26.06%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000502884/design/2024-06-19_dd40c5c6fe8ae.png"></li><li>Repeat for all socket sizes needed and then print. <img class="image_resized" style="width: 37.91%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000502884/design/2024-06-19_91c1acb26c49a.png">  </li><li>go to my profile to find the <a target="_blank" href="https://makerworld.com/en/models/495080#profileId-409150" rel="nofollow noopener">Label inserts</a>, premade with many common sizes. linked below. Or just ignore the label part of this if you don&#39;t want to do it. (the labels make it look really nice and easy to read everything and return it to the right spot in an instant.)  <img class="image_resized" style="width: 45.18%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000502884/design/2024-06-19_4638d3fbeb1f.jpg"></li><li>For your sockets that are less than 68mm in length, go to <a target="_blank" href="https://makerworld.com/en/models/495122#profileId-409200" rel="nofollow noopener">this model</a> For your standard short sockets, go to <a target="_blank" href="https://makerworld.com/en/models/495080#profileId-409150" rel="nofollow noopener">this model</a></li></ol>IssuesIf a description is still below here, then I haven&#39;t fixed it yet. If you find any new issues, let me know in a comment or a message an I&#39;ll try and resolve it as soon as possible.

Gridfinity Universal Socket Tray 100mm Deep socket

Gridfinity

Goof3d

An Ice Cream Cone with easy swap Flavors. Added 5mm Magnet cut outs for more stability.I will be adding various Flavor toppers as I make them. The topper, it fits as is, but fits better with an extra little twist. I&#39;ve also added a Cone Stand with pop in keychain cones. The 3MF is for the keychains and toppers. I added the RAW files for each as well. I hope you enjoy printing these for your kids or family.&nbsp; Be Careful of choking hazard of small pieces around children. &nbsp;

Ice Cream Cones with Stand and Keychain 

Ice Cream

Boss Tech Print Innovations

Original model is created BrickPrints from Thingiverse. Original link: <a target="_blank" href="https://www.thingiverse.com/thing:3536767" rel="nofollow noopener">https://www.thingiverse.com/thing:3536767</a>&nbsp;&nbsp;Introducing Halloween Lego Skeletons: the perfect fusion of spooky and playful, designed to add a bone-chilling twist to your Halloween festivities! Crafted with attention to detail, this skeletal masterpiece closely resembles a real skeleton, making it an ideal decoration or a quirky addition to your desk or wherever you find fit! &nbsp;🎉 Playful Yet Spooky: Perfect for Halloween parties or as a whimsical gift, our Lego Skeleton adds a playful touch to the spookiest night of the year. It's an excellent conversation starter and a fun way to celebrate the season.&nbsp;🎁 Great Gift Idea: Looking for a unique and entertaining gift for friends or family? This Halloween Flat Lego Skeleton is a fantastic choice, guaranteed to bring a smile to anyone's face.&nbsp;Get into the Halloween spirit with our Lego Skeletons, a blend of fright and fun that's perfect for both kids and adults. Embrace the Halloween season with this delightful, bone-chilling addition to your décor or a unique companion. Print yours today and let the spooky festivities begin!You have the option to print these in a 1 pack, 4 pack, 6 pack, and for those of you that want to give them out as gifts or simple have an army of Lego skeletons we have a 20pk to fill the plate. &nbsp;Dimensions: 41.28mm x 10.5mm x 23.2mm &nbsp;1pc (1 color: 25min print time| AMS: 1h26m hours print time)&nbsp;4pk (1 color: 1h16m min print time| AMS: 2h19m hours print time)&nbsp;6pk (1 color: 1h47m min print time| AMS: 2h55m hours print time)&nbsp;20pk (1 color: 5h34m min print time| AMS: 7h5m hours print time)&nbsp;

LEGO Halloween Skeleton Minifigure with Skull Face 

Lego

Kocyns

A tricolor model of a sloth that really dislikes moving ;DHeight: 100mm &nbsp;If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a>&nbsp;

Low poly fatty sloth

low Poly

Spongebob

neil3dprints

Help Batman with his trustee Batmobile save Gotham City with this miniature 3d printable toy set. Little Cities is a 3D Printable toy series where miniature buildings and vehicles are stored within a purpose designed case until ready for play. Once play begins simply unfold the case and attach the miniature buildings to the outside of the case to create a mini play set. Each case will be themed with mini vehicles to print as well. The cases can also interlock so you can expand your little cities playset as I develop and release new Little City themed cases.Please note some of the parts may cause a choking hazard, so these 3D printed toys are not recommend for children under the age of 6.Note - This is not a MMU print. Simply print the parts in the appropriate colours and glue them together.To see how to carry out filament changes mid-print, please refer to the link below. <a target="_blank" href="https://help.prusa3d.com/en/article/color-change_1687" rel="nofollow noopener">https://help.prusa3d.com/en/article/color-change_1687</a>If you want to stay up to date with this series and or perhaps interested in other projects I am working on, please check out my instagram or twitter.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a><a target="_blank" href="https://twitter.com/NHengist" rel="nofollow noopener">https://twitter.com/NHengist</a>Happy printing. ;-)Neil

Little Cities - Gotham City

little Cities

Ravitch

Yahahahaha, you found me! I've been wood carving these Koroks, and finally got around to modeling one in Blender. I modeled it to print the mask separate in case you wanted to multicolor, but you could just as easily print the mask in one color and paint in the eyes and features.&nbsp;I modeled the clearance for the nose to be slightly on the loose side, as it's easier to glue it in than shave it down if the clearance is too tight. I will be continuing to model these with all the different mask variants.

Yahaha!!  Legend of Zelda Breath of the Wild Heart Faced Korok

Zelda

Haloween

DjangoCashflow

Matching stand can be found <a target="_blank" href="https://makerworld.com/en/models/238320#profileId-254214" rel="nofollow noopener">here</a> Check out my other Kit Cards: <a target="_blank" href="https://makerworld.com/en/models/252373#profileId-268741" rel="nofollow noopener">Imperial Lambda Shuttle</a> <a target="_blank" href="https://makerworld.com/en/models/398440#profileId-299959" rel="nofollow noopener">Millennium Falcon</a> Embark on a captivating building journey with the &#34;X-Wing Starfighter Kit Card,&#34; a meticulously designed piece that encapsulates the essence of the iconic craft from the Star Wars saga. After a challenge from a friend questioning the existence of high-detail kit cards for the X-Wing, this near-perfect replica was born. Perfect for model hobbyists, collectors, and Star Wars enthusiasts of all ages, this kit allows you to immerse yourself in the construction and display of an intergalactic legend.  Features:Authentic Kit Card Assembly: Each component of the X-Wing is precisely engineered and presented on a kit card for easy identification and removal. No detail is too small, mirroring the complexity and intricacy of the legendary starfighter.Functioning Features: The model includes movable S-foils and a detailed cockpit, capturing the dynamic nature of the X-Wing in combat.Exquisite Detail: With an astonishing level of detail, this model echoes the design of the original starfighter, from the texture of its hull to the subtleties of its laser cannons.Engaging for All Ages: This model offers an enjoyable and insightful assembly process, inviting builders to appreciate the mechanical and aesthetic aspects of the X-Wing.Simple Yet Detailed Construction: The clear and comprehensive instructions provide an effortless building experience, allowing for a fully detailed model without the need for additional tools.A Nod to Nostalgia and Craftsmanship: Ideal for those who relish the artistry behind model-making and the cultural impact of the Star Wars universe.  Construct your own X-Wing Starfighter today, and revel in the assembly of a miniature marvel that&#39;s not just a model, but a high-fidelity homage to engineering and imagination. Spare Parts can be found in the RAW Files. X-Wing Starfighter Assembly GuideCongratulations on acquiring your own X-Wing Starfighter Detailed Model Kit. Follow this step-by-step guide to bring your starfighter to life.What You&#39;ll Need:<ul><li>The X-Wing Starfighter kit, which includes all wings and the main body.</li><li>A clean, flat surface for assembly.  </li></ul>1. Step: Wing Attachment  Prepare the Main Body:Locate the main body piece of your X-Wing model. This is the central fuselage that houses the cockpit and engines.Identify the Wings:You should have four wing pieces. Two of these are for the left side and two for the right side. They are mirror images of each other, with laser cannons on each tip. <img src="https://makerworld.bblmw.com/makerworld/draft/840276/2024-03-06_171eca47b52d8.jpeg">Wing Attachment:Take one of the wings and align it with the corresponding side on the main body. You will notice pins on the wings designed to fit securely into the holes on the main body.Secure the Wings:Gently but firmly, press the pins of the wing into the holes of the main body. The side of the wing that was facing the build plate during printing (usually flatter and may have more markings) should face inwards, towards the body of the ship.Repeat this process for all four wings, ensuring the cannons are facing forwards, in the direction the cockpit is pointing. <img src="https://makerworld.bblmw.com/makerworld/draft/840276/2024-03-06_24ea3f9d4a818.jpeg">Final Check:Once all wings are attached, give them a gentle tug to ensure they are securely in place. The wings should be level and symmetrical when viewed from the front or back. 2. Step: Cockpit Attachment With the wings securely attached, your next step is to assemble the cockpit and the nose of your X-Wing Starfighter. Here&#39;s how to continue your journey to a galaxy far, far away.What You&#39;ll Need:<ul><li>The left and right cockpit halves.</li><li>The nose part of the X-Wing.</li><li>The assembled main body from the previous steps.</li></ul>Assembly Instructions:Prepare the Cockpit Halves:<ul><li>Identify the left and right sides of the cockpit. They are uniquely shaped to fit together only one way. Check the interior detailing to ensure they are correctly oriented. <img src="https://makerworld.bblmw.com/makerworld/draft/840276/2024-03-06_bde770cd29049.jpeg"></li></ul>Align the Nose Part:<ul><li>Before joining the two halves, locate the nose part. This piece should have a distinct top and bottom, with the top likely having more detailed texturing.</li><li>Confirm that the nose part is correctly oriented with the printed side facing downward as shown in the reference picture. <img src="https://makerworld.bblmw.com/makerworld/draft/840276/2024-03-06_cc6aaaff2f796.jpeg"></li></ul>Join the Cockpit Halves:<ul><li>Carefully align the two halves of the cockpit so the internal supports and slots match up.</li><li>Gently press the halves together. The edges should align seamlessly, and the nose part should slot in without forcing. If there&#39;s resistance, check for any misalignment or excess material that might need to be filed or sanded away.</li></ul>Attach the Cockpit to the Main Body:<ul><li>Once the cockpit is fully assembled, position it over the main body. There should be a clear front and back to the cockpit, with the narrower end pointing forward.</li><li>Align the cockpit attachment points with the corresponding areas on the main body. Press down firmly to snap the cockpit into place. If it doesn&#39;t fit easily, do not force it; instead, double-check the alignment and try again. <img src="https://makerworld.bblmw.com/makerworld/draft/840276/2024-03-06_4823bf0b2774d.jpeg"> <img src="https://makerworld.bblmw.com/makerworld/draft/840276/2024-03-06_dd4ec2975d9ae.jpeg"></li></ul>Final Inspection:With the cockpit attached, your X-Wing should now be taking shape. Ensure that all parts are snugly fitted and that the cockpit sits flush against the main body without gaps. <img src="https://makerworld.bblmw.com/makerworld/draft/840276/2024-03-06_58c324384f1d.jpeg">  3. Step: Engine Attachment Your X-Wing is taking shape! Now it&#39;s time to add the power to your starfighter with the engine assembly. These engines, reminiscent of jet turbines, will complete the iconic look of your model.What You&#39;ll Need:<ul><li>Your nearly complete X-Wing model.</li><li>The four engine units.</li></ul>Assembly Instructions:Prepare the Engines:<ul><li>Lay out the four engine units. These are the parts that replicate the X-Wing&#39;s propulsion system. <img src="https://makerworld.bblmw.com/makerworld/draft/840276/2024-03-06_4f553356509.jpeg"></li></ul>Identify the Engine Orientation:<ul><li>Each engine has a specific orientation. The side with more detailing and structure should face towards the main body of the X-Wing, which will be the printed side, generally indicated by texture from the 3D printing process.</li></ul>Attach the Engines to the Wings:<ul><li>Locate the slots at the back of each wing, specifically designed for engine attachment.</li><li>Take an engine unit and align it with one of these slots. Make sure the printed side of the engine is facing inwards, towards the center of the X-Wing.<img src="https://makerworld.bblmw.com/makerworld/draft/840276/2024-03-06_c9e37d97e0783.jpeg"></li></ul>Secure the Engines:<ul><li>Gently but firmly, press the engine into the slot until it sits snugly in place. There should be a clear &#39;click&#39; or a sense of resistance when it&#39;s fully inserted.</li><li>Repeat this process with each of the remaining engines, ensuring all are oriented correctly and securely attached. <img src="https://makerworld.bblmw.com/makerworld/draft/840276/2024-03-06_fede85ce17779.jpeg"> Mission Accomplished! Your X-Wing Starfighter is ready for display, a true testament to your craftsmanship and the enduring spirit of a galaxy far, far away. Well done! <img src="https://makerworld.bblmw.com/makerworld/draft/840276/2024-03-06_4c8c46061a59c.jpeg">  </li></ul>

X-WING Starfighter Kit Card - High Detail - AMS

Kit Cards

mreci-

<blockquote>Update 1 (May 8 2024):<ul><li>Added new lid &#34;Lid - with design (no AMS version)&#34; to the print profile. There are two different ways to print this, I described it below in the lid section. I also uploaded a reference photo.</li><li>Slightly tweaked geometry in the lid&#39;s hotend design - the top part where filament enters is now separated from the below body.</li></ul>This is my first try at 3D modeling after learning in Fusion a little, I appreciate any feedback, and thanks for printing!</blockquote>&nbsp;I recently bought the A1 Series Hotends Kit from Bambu Store and wanted myself a case that would fit everything&nbsp;The case includes the following slots:<ul><li>3x Bambu Lab A1 series Hotend with Nozzle</li><li>3x Bambu Lab A1 series Silicone Sock</li><li>Space for accessories, I made it suitable for G3DS&#39;s <a target="_blank" href="https://makerworld.com/en/models/422022#profileId-324971" rel="nofollow noopener">HotEnd Sock Remover</a></li></ul>No supports are needed in any of the parts.The model is optimized for printing with 0.4mm nozzle and 0.2mm layer height.I measured the hotends and silicone socks to be tight fit in the slots so they don&#39;t move, but still not difficult to remove and insert&nbsp;The lid comes in 3 versions:<ul><li>Lid - clear</li><li>Lid - with design (AMS required) - please note this is untested, I don&#39;t have AMS on my printer to test the multi-color print. I don&#39;t expect any issues, but please let me know if you encounter any.</li><li>Lid - with design (no AMS version) - you can print this either: 1. Single color - no special settings required, just print it as is and the design will be embedded 0.4mm deep into the lid. 2. Dual color with 2 different filaments - you need to manually add a pause into the slicer at the beginning of layer 3 at 0.6mm layer height. (note that if you print with different layer height than 0.2mm you might need to pause at different layer) You can see how both options look in the reference photo.</li></ul>

A1 series - Hotend Nozzle and Silicone Sock case

utility 

Weiqi

Sword in 3 parts for kids. It just needs some glue to assembly the parts.The size is based on a 3-4 years kid (for the handle size).

Sword for kid - Roman style

Toys

dalet11

Low Poly Skull.&nbsp;Printed with Silk Gold, it's beautiful!

Low Poly Skull

Decorative

digitallyforgeddesigns

Looking for a piece of pop culture to add to your 3D design collection? Look no further than this intricately designed Mandalorian N-1 Starship 3D model available on makerworld.com. This model is a meticulous re-release of the iconic Starship seen on The Mandalorian series, made exclusively for personal use. Immerse yourself in the Star Wars universe with this fan art model, featuring the highest level of attention to detail and accuracy. Various screen-captured images from the series have been used as reference for this design to make sure every engine part and gun detail is as accurate as possible. Browse through our available images to understand the quality of this model further. For any fan of The Mandalorian, this 3D model is a must-have addition to your collection. Find it on makerworld.com by searching for the "Mandalorian N-1 Starship" under the "Pop Culture" category. Let your love for the series bear fruit in this magnificent 3D model offering.

Mandalorian N-1 Starship

Star Wars

SavageLau

<h2>If you want a commercial license, check out my bio and get it from Patreon.</h2><h2>Personal use only.</h2>&nbsp;This model is design for MakerWorld light contest (2/5). Complete free version is only available on here Makerworld. <h3>Many people have contacted me said they willing to pay for the model. Other platform product manager reach and out said I could use their platform and selling this design for some money, but I have decided to keep it here for free for now. So there will be more people could enjoying it :) So show me your finshed print, I would like to see it. </h3><h3> Anywhere else you see this model upload is Unauthorized (please notify me and report them), beside my own account (SavageLau). </h3>&nbsp;<h2>If you would like purchase LED light needed for this design and filament from Bambu Lab Offical website: Affiliate link is below, so I can get some commission to support my future work. </h2><h2><a target="_blank" href="https://shrsl.com/4h4np" rel="nofollow noopener">https://shrsl.com/4h4np</a> </h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-03-23_4ad27b7082fe3.png"></figure><h2>Filaments that I use for this project: (Bambu Lab Offical website:)</h2><h2><a target="_blank" href="https://shrsl.com/4h4ns" rel="nofollow noopener">https://shrsl.com/4h4ns</a> </h2>&nbsp;&nbsp;&nbsp;<h2>You may also like this design:</h2>PeaShooter Lamp Kit 001. <a target="_blank" href="https://makerworld.com/en/models/174475#profileId-191833" rel="nofollow noopener">https://makerworld.com/en/models/174475#profileId-191833</a> &nbsp;&nbsp;&nbsp;My boss saw some Bellsprout light the other day and she want me to design one. I have one LED Lamp kit come with my a1mini and sitting for a while. So why not turning it into what she want. So the design started adpot the lamp kit into Bellsprout.I found this pic on Google, based on the posture and proportion started deisng.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_bc131748fd272.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_33679f29d502a.png"></figure><h2>Update: </h2><h3>2/2/2024. A new profile was made for a1mini. Increased infill/walls on base and body part. </h3>Model main body have been reduced in size inorder to meet the build plate size for a1mini with muti-color prints. &nbsp;<a target="_blank" href="https://makerworld.com/en/u/2010665163" rel="nofollow noopener">@Sascha2202</a> feedback it is a bit hard to keep banlance. Weight increased on printing profile by adding more infill and walls. Weight for that part from 160g to 202g, lowered center of gravity. Consider head is around 40g + led weight, it should do well now. <h3>2/1/2024. Joints redesigned. </h3>Improved joints firction load, strength, tolerancing. New turning angle sets around 13.5 degrees max for each joints. <figure class="image image_resized" style="width:36.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_d00693a8b7acb.png"></figure>“Head” part fit and finish improving. <h3>Revisions and Tests today:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_ffe7e41994dec.png"></figure>&nbsp;<h2>Before you print(Important!):</h2>Run the joint test print first with the filament you are going to use for joints and body, before you doing the full print! This is important. Depend on filaments you use for the joint parts, there will be sinkage rate difference, and firction load on joint will be different.&nbsp;I put very tight tolerancing on design, but it may not work as intended when you printing with your filaments, so run the test and confirm joints is very tight to each other. Other wise You will not get the desired result.&nbsp;&nbsp;Joints with other parts are standard size. There is one “Tight” profile for joints. There are two types of joint, regular and with wire clip one. You will need to print total of 12 or above (maybe less than 15) to get good proportion. &nbsp;Joints designed best work with 4 wall layers, and 10% to 20% infill, adding more infill will not improve the strength, will only leading part failure during assembly. &nbsp;<h2>Hard ware:</h2>This design require Lamp LED Kit 001 from Bambu Lab. All other parts are printable. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_bca061fd80f1d.png"></figure>&nbsp;<h2>Post work:</h2>Removing brims from all parts, when you remove brim from joints part, confirm it is fully removed. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_dec1b2c670225.gif"></figure><h2>Assembly:</h2>Refer these gif image. Joints is a bit hard to push in, refer how I do it, holding the bottom part with you fingure, it will reduce the change of failure. &nbsp;Joints:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_5c978e23e8634.gif"></figure><figure class="image image_resized" style="width:51.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9f2e463b2d8a6.gif"></figure>Fully assembly:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9a975d341b61f.gif"></figure>&nbsp;&nbsp;&nbsp;<h2>Design:</h2>Lamp kit is 60mm dia, 8mm thickness. based on that dims and make rough draft to evaluate the overall size.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_34bf66e6b20e5.png"></figure>&nbsp;Working on some parts, and integrate them in the end.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_4880a9ab2336a.png"></figure>&nbsp;I started with wanting ball joint on the head, so it will able to turn angles. End up why not to have more ball joints on the body.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_b08f0ea2e5ee9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ec7f991cbaa.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ed16d7dd498.png"></figure>&nbsp;Ball joints is pain in the axx to work with. I want it to have a lot of friction load in normal condition. so the outter shell shall have very small tolerance to the ball or even smaller. Ended spending a lot of time try in truth to testing out different tolerances and make design revisions.Still not perfect, but it work for this application. You gain a lot of DOF, but it is a bit brittle, depends on your materials.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_153933e0ba5bb.png"></figure><h2>Revisions and tests:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_641c974fd0d58.png"></figure>