Punkt1

giuliolibrando

Ears to adapt a Dell PowerEdge 2U bezel to a PowerVault (in this case an MD1200)<h3> </h3>

Dell PowerVault Rack Ears Adapters for Dell PowerVault Front Bezel

19 zoll

Akelyte

V2 IS OUT! I HIGHLY RECOMMEND USING V2 OVER V1!&nbsp;V2 CAN BE FOUND HERE — <a target="_blank" href="https://makerworld.com/en/models/164470#profileId-180595" rel="nofollow noopener">VERSION 2</a>&nbsp;--------------------------------------------------------------------------------------&nbsp;Introducing the Z-Shield V1; a superior Z-Axis Cover for Bambu Lab P Series and X Series Printers. I’ve seen countless Z-Axis Covers for the P and X Series that simply sit in the recessed hole for the Z-Axis rod. I was never a fan of these designs, as I don’t want any component of my printer unnecessarily rubbing against plastic every time the bed moves.&nbsp;These can be printed in PLA if chamber temps are kept on the low side, but printing in ASA or ABS would yield better results. I'd appreciate any feedback, comments, or ratings if you liked this model, or would like to see some modifications made!&nbsp;Key Features:<ul><li>Universal Compatibility: The Z-Shield has been meticulously engineered to be compatible with all Bambu Core-XY printers. Whether you own an older P1P or a top-of-the-line X1C, you’ll have no issues with fitment.</li><li>Fast Printing Capability: Efficiency is key in 3D printing, and the Z-Shield stands out in this regard. Printing with supports, most models should take an hour or less to print.</li><li>Camera-Friendly Design: Understanding the importance of the built-in camera in Bambu printers, I’ve added an additional model of the Z-Shield with a recessed corner. This design ensures that the cover remains completely invisible to the onboard camera, allowing for uninterrupted monitoring and recording.</li><li>Non-Contact Protection: The non-contact design ensures there's no friction between the cover and the moving parts of the printer, thus preserving both the cover’s and the printer's integrity.</li><li>Durability and Aesthetics: The Z-Shield not only offers robust protection against environmental factors but also adds a sleek, professional look to your printer.</li></ul>&nbsp;Installation:You should hear an audible click as the Z-Shield seats into position.<figure class="image image_resized" style="width:60.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/474916/2024-01-24_7b1608fe96c01.gif"></figure>There should be approximately 1.2mm of clearance between your build plate and the Z-Shield on the left side of the printer. Make sure it is fully seated towards the left side of the printer. The right side cover will have plenty of clearance but should be installed in the same way.<figure class="image image_resized" style="width:59.75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/474916/2024-01-24_a020bd16214b8.jpg"></figure>&nbsp;Without Camera Cutout (Cover is Visible):<img src="https://lh7-us.googleusercontent.com/i-LEeFsZ7mhDzLJoBrUFpaK5Cn5Ayh42kzByMlxjRzr8UvIq2a5LPpTnoe78sli4vxMe6kIyHyXK_228t2mwJlRtrkD-04mPqnYroHSkVYS-0WNieazHfjjHJfkTJJ3wlqeZr-n8ZRD_Kc9tQuQpT5J8avjcPYlg8IYEr5WYu7Y5RglaqBmpirXS-tBbXA">&nbsp;&nbsp;With Camera Cutout (Cover not Visible):<img src="https://lh7-us.googleusercontent.com/kTBd3_n4No1vWBt2XkfTouic3bVZd__YhO3Mgr0JYj-t8Hl48ZjBFeqc4WncfWH8GNcoTiL1w7pK1VieXHvNaKYcEIPeV91I3hxKaDiNlWuEQwHQI3y6uasFrQPMhFufEWhsRysiBWzlHUh2FFM2JeqDPc9vVaxofvwg2YZg12ArH8JV-M9sqQPhV_Ytxg">

Z-Shield V1 - Z-Axis Cover for P1P, P1S, and X1C

bambu updates

M. Owize

<h2>Support for Amazon Echo Dot Alexa</h2>Echo Dot 4Echo Dot 4 with clockEcho Dot 5Echo Dot 5 with clock&nbsp;Echo Dot Width: 100mmEcho Dot Height: 89mm&nbsp;I was missing a fun stand for my Echo Dot. I modified the 3D mascot Phil aka Phil a ment to the size of the echo dot.10-15% Infill Gyroid.Use brim on the body. I used a 20mm outer edge to make sure it didn't fall off. Enjoy!

Amazon Echo Dot Alexa Dock

random

Habitaritus

This is my new version of my favourite name tags for Christmas presents or wherever you need Christmas gift tags :) You can of course paint the colours however you like. There is a screenshot with the size of the font, font type etc. included.Have fun labelling your presents!Have a look at my other models and don't forget to rate them :)&nbsp;UPDATE: Added a stand. Now you can also use the pendant as a table decoration. For example, as place cards at your Christmas dinner.

Christmas Gift Tag with custom Names

Christmas

WE3D Models

The FU Ghost Keychain is the perfect gift for any Spooky Season enthusiast! 🎃👻&nbsp;NOT FOR COMMERCIAL USE&nbsp;For Commercial Use License, visit:<a target="_blank" href="https://www.patreon.com/WE_3D" rel="nofollow noopener">https://www.patreon.com/WE_3D</a>