Prop maker

G-Man Projects

<h2>Apex Legends Wingman with Reload Mechanism</h2>A mechanical Apex Legends Wingman build project, with a spring loaded mechanism to mimic the reload animation in game.See the build tutorial video here: <a target="_blank" href="https://youtu.be/8yLk7pH2WKw" rel="nofollow noopener">https://youtu.be/8yLk7pH2WKw</a><h3>You will need</h3><ul><li>Black PLA</li><li>Silver PLA</li><li>Bronze PLA</li><li>Red PLA (a really small amount, so maybe don&#39;t buy a whole roll for it)</li></ul><h3>Additional parts required</h3><ul><li>1x Spring (65mm free length, 6.8mm diameter): <a target="_blank" href="https://uk.rs-online.com/web/p/compression-springs/0751477/" rel="nofollow noopener">https://uk.rs-online.com/web/p/compression-springs/0751477/</a> (this should be a fairly common spring internationally however I am unable to list sources for other countries)</li><li>15x No.6 x 3/8in self tapping flange screw (ebay/amazon/etc)</li><li>11x No.6 x 5/8in self tapping flange screw (14x if printing A1 Mini version!)</li></ul>Unfortunately the Bambu Store does not have the required parts (this model long predates the existence of Bambu Lab), I may modify this design in the future to be compatible, however by the looks of the springs available none of them would suffice anyway.&nbsp;If you enjoy this design and fancy supporting me, please buy me a Ko-fi: https://ko-fi.com/gmanprojects

Apex Legends Wingman with Reload Mechanics

Litolunar

Incredible keychain with the Batman logo, don't wait any longer and print it now.

Batman keyChain

keychain

SprocketStudios

This is a complete redesign of my <a target="_blank" href="https://makerworld.com/en/models/102934#profileId-109616" rel="nofollow noopener">original dragon egg</a>, started over from scratch. It features much more uniform scale position, and no more warnings or wobbly lower layers! The threading is identical to the original profile.&nbsp;There are four different versions of the egg:<ul><li>A large threaded egg with thin walls (for printing as-is or scaling up)</li><li>A large threaded egg with thick walls (for printing as-is or scaling down)</li><li>A small hollow egg (one piece) for printing as-is or scaling up</li><li>A small solid egg (one piece) for printing as-is or scaling down</li></ul>All four designs are included as different plates on one profile.&nbsp;As designed, the large egg will hold one of <a target="_blank" href="https://www.printables.com/model/525789-articulated-dragon" rel="nofollow noopener">McGybeer's articulated dragons</a>. However it's a pretty snug fit, if you are making this for a small child who will want to pack it back into the egg you may wish to print the thin-walled egg scaled up a bit. A print profile for this is included - it's the “scaled to 100mm” profile.&nbsp;The threads will line up the design perfectly if printed accurately. Some filaments are a bit “stickier” than others, it may take one or two opening / closing attempts to get it to move smoothly - particularly with silk PLA.&nbsp;If you are printing the threaded version with a dual color / coextruded filament it is crucial that you not rotate the parts at all on the build plate, or else the colors won't line up.

Threaded Dragon Eggs for All Occasions 

dragon

Martin Kozak

This cute colorful snail will help teach your kids letters of alphabet.&nbsp;&nbsp;Print parts in colors of your choice. Use different color to highlight letters.&nbsp;PLA, 0.2 mm, 2 perimeters, 3 bottom/5 top layer, 10% gyroid infill. No supports.

Alphabet Snail

bambaxp

One piece lamp

Prime Tower

Umbreon from the Pokemon Game series by Nintendo.

Pokemon-Umbreon-Multi Color 

pokemon

Cysterion

A plaque for the orbital laser stratagem&nbsp;UPDATE 3/5/2024: Added a V2 file that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more accurate to the in game version.

Helldivers 2 Orbital Laser Plaque

helldivers

grecdel

Miles Morales Portrait worked on HueForge.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments & Swap Instructions :<ul><li>Start with PLA BambuLab Black</li><li>At layer #4 (0.4mm) swap PLA BambuLab Basic Blue</li><li>At layer #6 (0.56mm) swap to PLA BambuLab Basic Red</li><li>At layer #15 (1.28mm) swap to PLA BambuLab White</li></ul>&nbsp;Enjoy !&nbsp;

Miles Morales (HueForge)

hueforge

Ciuf_Ciuf

<h2>General description</h2>After the great success of the drainage project, I am proposing a simpler and more intuitive version, especially for new users and beginners who are approaching the world of multicolor.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/54909#profileId-56456" rel="nofollow noopener">https://makerworld.com/en/models/54909#profileId-56456</a>&nbsp;The basic purpose is always to minimize purging material as much as possible to save on color changes and drastically reduce the amount of discarded materialI have decided to update the model and make it more user-friendlyThe basic idea was to make it a standard Bambulab Calibration, similar to the K calibrationSo, lines with numbers to instantly identify which value is the most accurate to assign to the purging of the respective materialBeing a test, it must be as economical as possible, so a test strip requires only 2 grams&nbsp;I'm leaving you the video of a guy who explains in detail how to use this type of calibrationI thank him for considering my project for the creation of a video on YouTube, and I'm pleased that I've shared his video<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=FP3CwBX6A4I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FP3CwBX6A4I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3> </h3><h3>Pre-print Procedure</h3>*Edit 03-01-2024*&nbsp;From one of the various print profiles you download, you'll need to set the color combination you desire<figure class="image image_resized" style="width:47.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_36c2f25737bbb.png"></figure>In my case, I'm calibrating these purge combinations, and the model will result like this<figure class="image image_resized" style="width:36.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_e5017ae8f46d08.png"></figure>If you want to change the color combination, simply use a different type of filament<figure class="image image_resized" style="width:37.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_a174ecda4566d.png"></figure>and the print profile will adapt to the combination you have set, as in this case<figure class="image image_resized" style="width:37.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_f1abfb2fe5f0a8.png"></figure>The model will update in real-time, allowing you to see immediately which color you are changingI've implemented additional print profiles to significantly streamline the procedure.While the process can be fast for those with a single AMS, it might be quite lengthy for those with multiple using the previous print profiles.With these new print profiles, there is also increased compatibility for the A1 Mini model.&nbsp;The idea of implementing the print profiles in this new way was suggested by Michael when he uploaded his print profile for the V1 model. I'll leave you the link to his Makerword channel (<a target="_blank" href="https://makerworld.com/en/u/2954682459" rel="nofollow noopener">https://makerworld.com/en/u/2954682459</a>)&nbsp;As on the previous model, it is necessary to reduce the purging material to allow us to calculate the material quantity adequately.The only significant difference is that this time we set all purging quantities to 0On the dual-object print profile, you can also do it manually.However, on the other print profiles, if you want to expedite the process, you can set the multiplier to 0, instantly reducing the purge to 0<figure class="image image_resized" style="width:35.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_f161c5ce7c0868.png"></figure>Now you can start the printing process&nbsp;Note: Do not touch any other parameters I've set, or the colors won't be printed in the correct order<h3>Calibration reading</h3>After completing the print, for calibrating the K factor, we need to read and determine the most accurate value to set as the purging quantityWhat you will find in front of you will be this<figure class="image image_resized" style="width:46.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_02e09355d1abf8.jpg"></figure>As you can see inside the two green rectangles, that is the exact moment when the material is purged, and the next color takes over.<figure class="image image_resized" style="width:46.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_617da72c674e78.jpg"></figure>At this point, all that's left is to identify the correct value and set the purging quantity for that specific color changeFor these tests, it's highlighted that 150mm^3 of material is required to perform the color change<figure class="image image_resized" style="width:46.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_e9817c7179a71.jpg"></figure>In this specific case, the quantity is identical for both color changes, but for other combinations, it may varyAs you can see, the difference between the default values of Bambustudio and the ones just found is significantly lower.This allows us to reduce material waste and significantly cut down on print times, decreasing the time the printer takes to change the filament<figure class="image image_resized" style="width:35.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_a67e103190684.png"><figcaption>BEFORE</figcaption></figure><figure class="image image_resized" style="width:35.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_ab83cab72d7d18.png"><figcaption>AFTER</figcaption></figure>&nbsp;

gun

keychain

dragon

Toy

led

pokemon

helldivers

hueforge

ams