Printy McPrintface

Miguel M.

LED strip clip.Simple and works very well. Screws on one side only, so very compact. fits 10mm strips.Do not attempt to print on its side, screw will split the layers and crack the print…..I printed 24 of these all at once with no problems. Even that small tip had no problem sticking to the bed with no brim.UpdateSee my remix of this strip, designed for mounting 2 parallel strips.<a target="_blank" href="https://makerworld.com/en/models/492531" rel="nofollow noopener">https://makerworld.com/en/models/492531</a>And If you have a minute, check out my other models!&nbsp;&nbsp;&nbsp;&nbsp;

LED Strip Clip

Sir_Stigma

Because my AirPods are always lying around, I&#39;ve now made a stand for them. Neat and tidy!

AirPods Gen. 1 & 2 case display Home Pod style

apple charging

Rafał

Pool beer holder, fits standard cans and bottles. Adjustable height.

Pool Beer Holder

beer

3D Art

Filament holder for Ikea perforated panels (Skadis) elements.Great wall shelf and a neat and tidy range for filament rolls.&nbsp;Sign Gadget Link here:<a target="_blank" href="https://makerworld.com/en/models/180244#profileId-198278" rel="nofollow noopener">https://makerworld.com/en/models/180244#profileId-198278</a>&nbsp;Have fun with it3D Art Printing Service

Filament spoolholder IKEA perforated panels

Skadis 

marpicio7

container for silica gel to put inside the bambulab reels. suitable both inside ams during printing and inside the bag for maintenancethe lid is marked, so you don't unscrew from the wrong side

silica gel container for bambulab spool

Filament drybox/storage

Qjeezy

Aztec - Mayan calendar, AKA The Sun Stone.&nbsp;This is a loooong print, but it is soooooo worth it. This thing looks awesome. Black filament and some Rub n' Buff makes this masterpiece really pop. You may notice that the thickness is larger on one side of the Sun Stone than the other. This was actually done by mistake but I wound up liking it because it gave it sort of a hand crafted vibe. Perfection is in the eyes of the beholder.&nbsp;&nbsp;Print Recommendations:&nbsp;0.20mm layer height works, but 0.16 helps the details appear slightly smoother. You can go less if you'd like but I personally have not experimented with smaller layer heights. I would not advise higher layer heights. It may work, but you may also lose a lot of the detail.&nbsp;Keep printing speeds on the low side and ensure plenty of infill. There are many fine details that will benefit. This is what I used and what I know works. I started with the default 0.16mm High Quality Print profile and changed the following.- Both initial layer speeds @ 50mm/s.- All other print speeds set to 150mm/s with the exception of outer wall, bridge, and overhang speeds. Leave those at default.- Travel speed set to 300mm/s.- Default acceleration speeds for 0.16mm High Quality profile.- 20% rectilinear infill.&nbsp;If you want to print one that is slightly translucent like the white one in my pictures, use a slightly translucent filament. I used white eSun ePLA-HS. Its not labeled as being translucent, but its got a slight bit of clarity. Just enough I might say to get the effect. I also set the infill to 20% aligned rectilinear.&nbsp;You don't need the AUX fan for this print. To ensure you don't experience warping, turn the aux fan off. If you use Bambu PLA the AUX fan is set to 70% at default. Ensure you turn this off in the filament profile or just turn it off after your print starts if you're printing from the Handy app.&nbsp;Clean your build plate with soap and water and ensure you do not touch the surface with your bare hands. This will help ensure adhesion so you don't lose your print at any point. Feel free to use your favorite adhesion promoter on your build plate for extra assurance.&nbsp;Ensure your filament is dry and calibrated. There are a lot of fine details and tons of travels.&nbsp;You probably can scale this down but just remember the smaller you go, the more details you're going to lose. If you're looking to make a miniature, using a 0.2mm nozzle me be required to retain quality. Going too small may just wind up in a weird failure. I have not tested this so this is not a recommendation.&nbsp;Lastly, this is not a Hueforge. This model was scanned using a Revopoint Miraco and adjusted in Nomad Sculpt.&nbsp;

Aztec-Mayan Calendar -- The Sun Stone

lighting 

hofflab

<h2>Simple A1mini Cable Chain for Heatbed. (A1mini ready, ≈ 40g)</h2>&nbsp;Only 16 chain links and 15 lids are required, but I added 18 of both as they do not require much filament. Sometimes, little adhesion problems will ruin the look and functionality of a chain link or lid.&nbsp;Removing  supports of the bed anchor can be quite tricky and will require some form of tweezers!&nbsp;Installation:<ol><li>First install the base and bed anchor, which should fit perfectly (don&#39;t worry too much about the cables, as they will fit into place “automatically”).</li><li>Attach 16 links to each other and both anchors. (The open side should face “inside”. See my pictures). The links could also be attached one by one with alternating “openings”, I just did not like the look of it. Try it out and decide for yourself.</li><li>Push the bed back as far as possible for easy installation of the lids. Because of their size they are quite fragile so be careful while installing or disassembly.</li></ol>If you encounter any problems or got ideas for improvement just massage me in the DMs.

A1 mini Heatbed Cable Chain

A1mini upgrades

K2_Kevin

Uses the same keychain with a much smaller key hanger wall mount.

Modern Keychain Hanger - MINI

storage

agepbiz

<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=jj3vnPYccS4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/jj3vnPYccS4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Simple and clean looking Xbox Controller Standfits 8x3mm anti slip rubber pads (optional)&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a> YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">https://twitter.com/agepbiz</a>&nbsp;Printsettings: No raft Support Structures for best results where the rubber pads are 0,1-0,2mm layer height

LED