PrestonB

Meister Edel

HeyhoHere I have a completely 3D printable pulley for you!I recently designed an attachment for my clothesline (which also works great!) and of course the idea came up to simply use a pulley! Previous designs I found online always needed extra parts or didn't look very sturdy.So I designed my own solution and tested it for you!There are 3 different versions:<ol><li>Easy to print pulley </li></ol><figure class="image image_resized image-style-align-center" style="width:60.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/257469/2023-12-11_li760f9y0kfc.jpg"></figure>A quick printed version where there is only 1 main part. Due to the slightly thinner suspension, this version fits well into most hooks or can also be attached with a rope. The disadvantage is that it is less stable than the other versions due to the print orientation. Nevertheless, it is more than sufficient for most tasks!<ol><li>Strong pulley </li></ol><figure class="image image_resized image-style-align-center" style="width:43.4%;"><img src="https://makerworld.bblmw.com/makerworld/draft/257469/2023-12-11_dmgi5c9h190e.png"></figure>This version is particularly solid and can be printed even more stably thanks to the optimized alignment. After printing, simply put the 2 halves together with the small pin in the middle and after inserting the roller, the version is sufficiently stable.If you prefer, you can also put the two halves together with a little glue.<ol><li>Pulley for eyelets </li></ol><figure class="image image_resized image-style-align-center" style="width:44.39%;"><img src="https://makerworld.bblmw.com/makerworld/draft/257469/2023-12-11_brsqi4i0b1h2.jpg"></figure>This version can also be used in combination with eyelets, where the two previous versions cannot simply be used. However, you must first assemble the individual parts on the eyelet. The halves should not be glued together! Unless you don't want to remove it from the eyelet!ScalabilitySince all 3 variants are completely 3D printed, you can also scale them "at will"! So make them bigger or smaller! But always keep an eye on the tolerances and the perimeters!<figure class="image image-style-align-center image_resized" style="width:64.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/257469/2023-12-11_fkehzyjntfko.png"></figure>Printing tips:You should use as many perimeters as possible (6 Perimeter should be enough with the given size). Infill at 100% brings the remaining stability. PLA is probably sufficient for short loads. For continuous loads, I would recommend PETG or other stable materials. <figure class="image image_resized image-style-align-center" style="width:64.76%;"><img src="https://makerworld.bblmw.com/makerworld/draft/257469/2023-12-11_0wdhexfkw5rp.png"></figure>Post processing:As the friction between the 2 parts of the roll naturally increases with higher loads, some oil must be added. I simply used some chain oil from my bike for this. To make it easier to add the oil, I constructed 2 small openings on each side of the wheel. Simply pour in some oil here, move the wheel back and forth a little and then remove any excess oil.<figure class="image image_resized image-style-align-center" style="width:67.55%;"><img src="https://makerworld.bblmw.com/makerworld/draft/257469/2023-12-11_tpfg6durgksg.jpg"></figure> Slicing Tipps: If you are struggling with some parts you can separate them into single objects and scale them up/ down a little to get a perfect fit!<figure class="image image_resized image-style-align-center" style="width:66.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/257469/2023-12-11_plja8r5232v4.png"></figure> Have fun!

Strong Pulley 100% 3D Printable, Scaleable & Durable

sailing

WARBIRD

Kleiner Igel als Geocache, passend für PETlinge, Gedruckt mit “Das Filament” PETG gelb, ohne SupportRemix von Hedgehog geocache realistic<a target="_blank" href="https://www.thingiverse.com/AnthonyWalley" rel="nofollow noopener">AnthonyWalley</a>August 11, 2021

Geocache Igel PET

Geocaching

Mountain Designs

Simple Nozzle / Cap for Silicon Tube / Gap Filler Dispensed from Caulking Guns.

Silcon Cap Nozzle

finniminni

Protect your delicate seedlings from heavy rain with the Seedling Shield! This cover is designed to safeguard young plants from being damaged by excess water while still allowing for air circulation and light penetration.I designed it to protect my tomato-plants, since they dont like beeing directly exposed to rain.

Seedling Shield - Raincover for small Plant

Plants & Pets

geode.rc

<h2>Summary</h2>3D Printed &#34;Carbon Bug&#34; DLG with Carbon Nylon PA-CF filament. All DLG parts are printed with PA-CF for best strength/weight ratio and high temperature resistance. This release also comes with newly designed skeleton tail feathers, integrated fuselage/wing root and re-fined wing jig, etc.&nbsp;Revision History:Rev 1.0 (4/27/2024) Original releaseCarbon Bug is intended for experienced builders/pilots with extensive knowledge in building DLG gliders. Although not required, builder is recommended to have experience with Bambu Studio slicer and modifier.&nbsp;RCGroups Thread: <a target="_blank" href="https://www.rcgroups.com/forums/showthread.php?4489525-Another-Bug-DLG-3D-Printed-Version" rel="nofollow noopener">https://www.rcgroups.com/forums/showthread.php?4489525-Another-Bug-DLG-3D-Printed-Version</a>&nbsp;Lightnin’ Bug Plan: <a target="_blank" href="https://www.rcgroups.com/forums/showpost.php?p=30832050" rel="nofollow noopener">https://www.rcgroups.com/forums/showpost.php?p=30832050</a>Related Videos:(1) BUG 3DP Overview: <a target="_blank" href="https://youtu.be/MfsZifHM2jI" rel="nofollow noopener">https://youtu.be/MfsZifHM2jI</a> (2) BUG 3DP Build Log: <a target="_blank" href="https://youtu.be/UxRinoQI4BE" rel="nofollow noopener">https://youtu.be/UxRinoQI4BE</a> (3) BUG 3DP Flight Report: <a target="_blank" href="https://youtu.be/waddDkHVwfY" rel="nofollow noopener">https://youtu.be/waddDkHVwfY</a> (4) &#34;CARBON BUG&#34; Build Log / Manual: <a target="_blank" href="https://youtu.be/HaM_Sx3enYA" rel="nofollow noopener">https://youtu.be/HaM_Sx3enYA</a><h2>Print Settings</h2>Printer Brand: Bambulabs Printer: Bambu X1C&nbsp; Notes: This release is for Bambu Studio / Orca slicers. Please see build log / manual video and 3mf files for details.&nbsp;

"CARBON BUG" - ALL CARBON, 3D PRINTED DLG

RC Sailboat 

adw.dsgn

My cup holder adapter is designed to fit Stanley&#39;s, Yeti&#39;s, Hydrofask&#39;s and other comically large water bottles in your puny cup holders. There are various base sizes from 85mm to 65mm in diameter to fit inside various cup holders. The TPU restraining tabs are optional but are required for any bottle too small to fit the 100mm inner diameter of the adapter. I recommend you add a dab of super glue to hold them in place. If none of the available sizes fit your particular cup holder, post the diameter and depth of your vehicles cupholder and I will try to upload a variation that fits. If your vehicle gets too hot, consider printing it in more temperature resistant material like PETG

Car Cup Holder Adapter with flexible TPU tabs

N426

Fill these bulbs with purge waste, skirts, brims, supports, or any other little bits of otherwise wasted material to add some color to whatever form of string lights you&#39;ve got laying around, fairy lights, christmas lights, you name it.&nbsp;Two bulb types, one simple and one with some twist to it. Both measure about 2in tall by 1in max OD. Fill bulb with material, slide the wires of the light through the slot in the cap (one of the pics shows this), then insert into the bulb which should be a snug enough fit to hold itself, but still easy enough to remove with a tiny bit of force. Printing the bulbs in vase mode yields a great result, but the seam really shouldn&#39;t be a big deal so feel free to print a plateful with one wall and no infill.&nbsp;The amount of material will probably vary based on light source/# of lights per bulb, regardless I&#39;d recommend lighter colors. In my pics I used fairy lights with some bulbs having one light and some two with varying amounts, colors, and sources of fill.

Colorful Purge Bulbs for String Lights

Christmas

MaxRes Studios

Best to be printed on a Multi-Colour Printer.Hinges can be made from a cut piece of filament.

Captain's Use Only (Port and Starboard Directions)

gifts

Leif3D

Looking for a classy door sign that&#39;s both fun and practical? It features a clever print-in-place holder with a sliding mechanism and various inserts that can easily be swapped out to suit your needs.   Right now, it&#39;s all about the bathroom – making sure private things stay private and nobody gets surprised when the door is opened.But I&#39;m expanding the range of inserts to include cool options for your office, the kids&#39; gaming hideout, and more in the very near future.Got another idea for a new insert? Drop me a line – I&#39;m all ears for your creative suggestions!&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;The holder has the following dimensions: Width: 150mm Height: 70mm (75mm with the top grip of the inserts) Thickness: 15mm (about 19mm with the grip of the slider)For individuals preferring a more permanent fixture than double-sided tape, the design includes two holes located behind the inserts. These holes are 4.5mm in diameter.&nbsp; Some printing notes:<ul><li>I&#39;ve used tree support because it&#39;s much easier to remove in this print than the classic support. I&#39;ve tried both. Due to it it relies a bit on bridging capabilities, which shouldn&#39;t be an issue with a Bambu or other dialed in printer and filament.</li><li>The slider has a hidden and very thin support that&#39;s already implemented in the design. The first time you move the slider it might need some little force, but at that point the support of it will break by design and release the slider fully. I&#39;ve used plenty of tolerances in my design so it should move very easily after that first sliding action. I did multiple test prints in PLA and that design approach worked always without an issue.</li><li>My inserts are designed in a way that you can easily change the colors of the elements in the Bambu Studio objects tab. Want to change the background color of one side of an insert or do multi-color lettering or graphics? It&#39;s no problem.</li><li>In all of my test prints so far I had only one time a not so perfect line on the slider - this was the only time i tried to print it with “matte” filament. If you experience that and you&#39;ve used matte as well, you might want to try with another or tweak the settings a little bit for it.</li></ul><h3> Updates:</h3>22.03.2024<ul><li>Based on the first user request I&#39;ve added a “clean vs dirty” insert.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000379944/design/2024-03-29_78ee500a1d604.jpg"></li></ul>29.03.2024<ul><li>I&#39;ve added an “Available” / “In Use” Sign for Meeting Rooms or Machines <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000379944/design/2024-03-29_c4ed3f1281f5b.jpg"></li></ul>&nbsp;31.03.2024<ul><li>Due to requests I&#39;ve added a slighty thicker version of the holder that has 6 additional holes at the back for 10x3mm Magnets. I&#39;ve tried common Amazon Neodym Magnets at that size and 3 were enough to keep the holder and insert in place (tested on a fridge).  The holes for the magnets have a diameter of 10.2mm. So there is a little tolerance, which was in my test still small enough to give the magnets a nice friction fit.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000379944/design/2024-03-31_37e823e14a84f.jpg"></li></ul>07.04.2024Improved the support design further to avoid layer shift that could occur on the print in place slider with more brittle filaments (like old filament or matte PLA). To do this I&#39;ve changed two things:  <ol><li>Added tree support under the handle. It&#39;s still easy to remove and doesn&#39;t leave big marks, but it increases the stability during printing a lot. Especially for people using a bed slinger.</li><li>added very thin “fins” at the back of the slider into the design to make it more stable in the Y-Axis during printing. They&#39;re very subtle and easily break free when it&#39;s moved the first time, but help with the print process.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000379944/design/2024-04-07_bda146c26413a.png"> I&#39;ve test printed the updated classic and magnet version with my most brittle filament I had (Sunlu Matte White) and had no issues with it.</li></ol> 09.04.2024I have added a printplate with just the handle part of the inserts. This way you can easily create your own inserts with the Makerworld “Make my Sign” and then attach the handle in the slicer.  To do this open “<a target="_blank" href="https://makerworld.com/en/makerlab/makeMySign" rel="nofollow noopener">Make My Sign</a>” and follow the next steps to get the right size. Play around with the colors, text, shape or add svg as you want.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000379944/design/2024-04-09_6644bde4e143.png">&nbsp;&nbsp;I highly recommend to select “Face down”. This way it will have the right orientation when you add it in the next step to the slicer and having the text / icons facing down usually also results in a better front finish of the insert<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000379944/design/2024-04-09_7b902d727b372.png"></figure>Then click dowload and save the .3mf file.   Next step - Bambu Studio: Open the latest version of my file. I&#39;ve added the Handle today, so previous versions won&#39;t have it.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000379944/design/2024-04-09_cdb407122bf46.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000379944/design/2024-04-09_6b5f76672695d.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000379944/design/2024-04-09_dc3332876ddb7.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000379944/design/2024-04-09_c1273485bd852.png"></figure>&nbsp;If you feel uncomfortable with these steps you can also just print your insert and the handle separately and glue them together.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Boosts are greatly appreciated. They not only help offset the filament costs of test printing such designs and going through multiple iterations until they&#39;re &#39;ready&#39; to share, but they&#39;re also a vote of confidence that inspires us to keep exploring new ideas and pushing the limits of what&#39;s possible with 3D printing. I&#39;m deeply thankful for every single boost and the support it represents. Whether you use them on my models or others&#39; - please utilize them.

Sliding Door Sign with interchangeable inserts

Bathroom 

KYZ Design

<ul><li>Modeled from scratch to optimise for strength, rigidity and a quality feel, not for “fast print”.</li><li>Slightly deeper than standard bins.</li><li>No magnet holes.</li><li>Walls are 2.6mm thick.</li></ul>If you need 1x1 bins specifically, check out <a target="_blank" href="https://makerworld.com/en/models/50848" rel="nofollow noopener">these ones</a> - they are much deeper and have no infill in the base.<img src="https://makerworld.bblmw.com/makerworld/draft/536961/2023-12-27_a08a7bc1dedd78.jpg">&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my other Gridfinity models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models.

Gridfinity 2.6mm Wall Divider Bins - 20 Sizes

Gridfinity

zoroseerus

a (less elegant) remix of a nozzle wiper addon from Alkerion_426716.&nbsp;Updated to fix an obvious issue that I somehow missed on initial upload.&nbsp;This wiper is in a translucent PETG and looks sort of unappealing because I've pulled this particular wiper off of a few others and there's glue residue<figure class="media"><div data-oembed-url="https://youtu.be/WuNBqSSixt8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/WuNBqSSixt8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/acwKTjpJHPc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/acwKTjpJHPc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

A1 Mini Nozzle Wiper For Bambu Lab P1P/P1S/X1C

Printer Parts

DGs 3D-PRINT

C-Klemmen von klein bis groß (S-XXL) in Kurz und LangIdeal als Leimzwingen zu verwendenIch empfehle grundsätzlich PETG für mechanische Teile.In PETG sind die teile sehr Stabil.Es kann aber auch in PLA+ Gedruckt werden.&nbsp;KlemmbereichKurzS 0-33mmM 0-40mmL 0-51mmXL 0-63mmXXL 0-75mm&nbsp;LangS 15-45mmM 15-60mmL 25-75mmXL 30-90mmXXL 35-105mm&nbsp;Neu 22.02.2024 auf Wunsch gibt es jetzt eine längere Version der Schraube die Separat Gedownloadet werden kann.etwa 17-36mm von S bis XXL&nbsp;Neu 21.02.2024Ein neues Tool für die C-Klemme Es soll das Verleimen, Verschrauben und Montieren von Bauteilen im 90er Winkel erleichtern.<a target="_blank" href="https://makerworld.com/en/models/195392#profileId-215966" rel="nofollow noopener">https://makerworld.com/en/models/195392#profileId-215966</a><figure class="image image_resized" style="width:48.23%;"><img src="https://makerworld.bblmw.com/makerworld/draft/566981/2024-02-21_adc051d84dec8.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;

C-Klemme Schraubzwinge von S-XXL

Tools

mlodybuk

6 types of mushrooms for your projectScale, reshape, remix however you want and need&nbsp;<a href="https://www.buymeacoffee.com/mlodybuku" rel="nofollow">If you want to support my work CLICK HERE</a>

Mushroom collection

Sunny

TripleGWorkshop

Designed to print max size fast.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/120189/2023-10-26_fq631x4i2yno.jpg"></figure>

Shelf Organizer Bins

organization

aaron.carey428

great for setting your fly rod on while changing fly's or fixing leader.

belt mounted fly rod holder

Fishing

Waffly3D

Cute Caterpillar I modeled using Blender 4.0! IMPORTANT: If You Would Like To Make The Two Dots In The Eyes A Different Color Then I Recommend Scheduling A Pause At Layer ~42 (Which Has Been Preset In My First Print Profile) And Changing AMS Slot 4 (Mouth Color) To The Desired Eye Color (Typically White).Printing Multiples Will Optimize Filament Usage!View My Other Work Here! → <a target="_blank" href="https://www.etsy.com/shop/Waffly3D?ref=l2-about-shopname" rel="nofollow noopener">https://www.etsy.com/shop/Waffly3D?ref=l2-about-shopname</a> &nbsp;