not sure what happened but I have some funky color lines happening. and the top spinning handle definitely needs some straightening. otherwise it is cute

once I added a brim it printed completely fine! without a brim even on a smooth plate, all I had was failed prints as those tiny “suckers” just couldn’t help but detach.

turned out perfect! thanks for a great print!

Way too many "holes" in the flower pattern. Still figuring out the best nozzle and setting to eliminate them

Great profile! Few things I noticed...Top where the shoe wraps around your ankle is a bit rough feeling but a quick touch of a lighter/torch it helped smoothed it out. Was also a bit tight around the ankle but I also customized it to fit my 6 year old. I will also need to adjust the z distance on the pla support on my other shoe as the heal stuck way too much. I ended up needing pliers to help remove the supports, which I thought was odd as I was using PLA for the support. Machine used was H2D, PLA for support and TPU 90 for shoe. All filament was dried down to 9%.

printed great! Just have to glue together and try it out

printed great. Had a bit of stringing around the handle.

profile is great. Supports do need adjusting as they are super hard to remove

Added PLA support to print, which made it much easier to remove. Would love to add a PLA full base support to make the very bottom a bit more neater looking as it being printed straight on bed makes it a bit messy just at that adhesion part to bed. Over all great profile!

big but printed great and works well

Printed great! The tab to close it could be a bit wider though so it doesn't come apart as easily when looped around and secured

Printed great! used BT3x8 screws instead as I didn't have the ones that you suggested. They were tight but worked great!

Fairly solid Print! Looks great too! Had some issues with the Auger. Those maybe filament needed to be dry but it is at 10% and in the same ams as the other colors used, first one broke while trying to get the bendable piece loose. reprinted and was extra careful. Wheel hub capes could be a bit snugged too

Great print! printed straight of handy app and would definitely do our next one off the computer and either change the supports a bit differently as they were a huge pain to try and get off, (still trying)… especially on the bottom shoot. Or I would split the hopper bottom like the top part, and print it upside down. Ladders also are a bit long for the model. pairing is easy, but either the breaks are too short or to long to adjust to the height. I didn’t change anything (measurement wise) so not sure if your photo is a different scale or if you change the ladder size.

Printed great but are hard to line up seems like they have to be put together a certain way in order for it to be seamless. I used spacers from another style to help keep it off the wall and while they worked, my spacers were a bit too wide resulting in needing to improvise to get each plate to lineup snuggly. Having the screw holes a bit more in would’ve helped or having specific spacers for this style. Otherwise I love the looks of this when put together.