Optimized three-plate multi-part printing, assembly version 0.16mm layer height, 2 walls, 14% infill

0.16mm layer, 2 walls, 15% infill

Upgraded version that can hold hard card sleeves 0.16mm layer height, 2 walls, 15% infill

0.16mm layer, 2 walls, 15% infill

110% version, clearer details, 0.16mm layer height, 2 walls, 12% infill

45mm small cake 0.16mm layer, 2 walls, 15% infill

0.16mm layer, 2 walls, 15% infill

0.16mm layer, 2 walls, 12% infill

0.16mm layer, 2 walls, 15% infill

All on one plate, 0.16mm layer height, 2 walls, 15% infill

0.16mm layer, 2 walls, 15% infill

0.16mm layer, 3 walls, 15% infill

Single print, new supports added manually, very dense, I have no solution if it still spaghettifies. 0.2mm layer height, 3 walls, 15% infill

Single-character Fu 0.2mm layer, 3 perimeters, 15% infill

Hollow version Fu, 0.2mm layer, 3 walls, 15% infill

Square 0.2mm layer, 3 walls, 15% infill

Elegant piped buttercream Fu, with base, 0.2mm layer height, 3 walls, 15% infill

55mm key only 0.16mm layer height, 2 walls, 15% infill

55mm large lock key single plate print 0.16mm layer, 2 walls, 15% infill

A single 45mm key, 0.16mm layer height, 2 walls, 15% infill