PixelDotGra.FX

SPStudio

<h4>I update, revise and improve my design for my fixes very often. Please only use my Print Profile (Labelled as Designer or SPStudio) to ensure this fix is updated & work well. Profile with Non-Designer tags may be of poor functionality or non updated model.</h4>Click on Like if this model helped you in some way. It is very important and will help increase the exposure of this design to more people who might need it. Cheers!&nbsp;<blockquote>AnnouncementNew and Improved V2 Versions for the Ams Buffer Fix <a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">Before Buffer</a> and <a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">After Buffer</a> have just been released. Do check them out in my profile to see what are the improvement. Thank you for your continuous support.<figure class="image image_resized" style="width:33.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2023-12-21_db335e9276f41.jpg"></figure></blockquote><h2> </h2><h2>Introduction</h2>Failed to pull back filament error can be caused by multiple different variables & factors. This is a part of an series of Ams fixes that i have designed which can complement each other when used together. I do suggest you install all my fixes together for the 0ptimal effect to help your filament travel properly across the entire system which in turn can help improve, reduce or remove any potential Ams errors.&nbsp;I have grouped all fixes into their respective Collection for ease of searching what to install.&nbsp;V2 Collection are improvements done on the shortcoming of V1 Collection. Feel free to try V2 Collection and if it doesn't work properly then you can try the V1 Collection. You can easily find each of the Collection by clicking on the Collections tab on my profile.&nbsp;Unfortunately there isn't a single fix that can 100% work for everyone. What works for others, may not work for you but my fixes is definately a great place to start and have worked for majority of the users. My fixes are precisely measured then modelled. A Proper Fix would have the highest chance to reduce or solve the error.&nbsp;<figure class="image image_resized" style="width:81.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2024-01-09_cd9c426e40212.jpg"></figure><h2> </h2><h2> </h2><h2>If you are too bored to read the entire lengthy write up explaining the need for this fix, here is the TL:DR.</h2>&nbsp;What is this? Ams Fix - Stack the Ams on tp have a Ptfe tube holder that is curved, bent and also compressed in a way that it will prevent any deformation of the Ptfe tube by gripping the tube at the middle part of the mount yet it allowed the front part of tube to move and flex within an acceptable measured range.&nbsp;&nbsp;Who needs this fix? You encounter problems and errors during printing when you attempt trying to stack your Ams on tp of your Printer and Bambu Labs advice to you is place the Ams on the right or left side of the printer then this is the fix for you.&nbsp;&nbsp;Have this fix been tested?This fix have been tested for on 1 X1C, 1 P1P and 2 P1S for than 92200 retractions.&nbsp;&nbsp;Why choose this fix instead of other similarly designed fix?This is ez to print but yet its pretty precisely measured for the angle of the curvature. It looks like a semi circle but i can assure you its not just a semi circle holder. The degree to the bend and curve even down to the 2 ends how its designed have been measured and after countless trial and error i arrive at this is the proper curvature that will allow the filament to pass through with a smooth movement with the least amount of friction.&nbsp;&nbsp;<h2>Installation Video</h2>Plz look carefully at how the different 2 ends, one round hole one square hole is installed. It's very crucial please follow exactly.&nbsp;Please do not thread the Ptfe along the curvature. As per install instruction you should go in 1 end then the next end then insert the cable into the rear of the Ams then adjust the tip of the end to near the exit. Then finally you press down the rest of the tube into the fix.<figure class="media"><div data-oembed-url="https://youtu.be/3Rj86AUIMHo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/3Rj86AUIMHo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Running Loading And Unloading, Look Carefully to see how the filament go through and the mount moving. If your set after install looks very differently means you could have installed it wrongly.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/CVw1Nej57N4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/CVw1Nej57N4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;This part have to be as close to the Ams exit as possible. Also make sure you push the Ptfe tube all the way INTO the Ams before you align this part to be close to the exit. Then finally you press the Ptfe into the mount at the middle part which will tightly hold the Ptfe.&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/393292/2023-10-31_895d0fc85d9ca.png">&nbsp;<h2>Important Notes:</h2> Note 1: Please follow the instructional video carefully its very important. Note 2: The Ptfe tube in the holder is designed to move and flex as the filament go through it. Its intentional and there must be at least 10 to 15 cm of space behind the printer for the measured flexing motion to happen. Note 3: Capricorn Ptfe will not work unless if its the same O/D as the Bambu specification tube Note 4: The fix is designed to be tight in the middle part. Its normal as stated above it helps to ensure the tube remain in the proper curvature angle. You will need to press the Ptfe into the middle part of the holder. The end that connect to the rear of the Ams is designed to be loose (Square End) and able to flex easily. The other end (End with a round hole) is designed to let the Ptfe tube pass through snugly. If this sounds confusing then please follow the installation video carefully. Note 5: This fix will work on all Ams including Hydra or Non Modified Ams.&nbsp;&nbsp;<h2>Important</h2>This would be the most ideal route for the Ptfe tube if your Ams is on tp of the printer. Its basically a huge C. Please try to make the Ptfe route like this. The most ideal length of Ptfe is 62cm IF your Ams is on tp of the printer with NO riser. 62cm will be able to give you this perfect route.&nbsp;If you have a riser just adjust the route to be somewhat similar for the proper effect.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2023-11-19_59f68579e3d43.jpg"></figure>&nbsp;&nbsp;&nbsp;<h2>What Mod / Fixes / Enhancement do i offer?</h2>Please don't download the wrong one. Only those in the photos below is designed by me who painstakingly took a lot of time to measure carefully and design just to get it working. #SupportOriginal Love you guys for all the support so far!&nbsp;- <a target="_blank" href="https://makerworld.com/en/models/47982" rel="nofollow noopener">Ams FIX Failed To Retract Filament Error (a preventive measure and solve the bay 2 and 3 error and prevent bay 1 and 4 to have any possibility of having an error due to tension and friction)</a> (Updated design on the 2nd photo below, try 1 then if it doesn't works properly for you then install the other one.)&nbsp;<figure class="image image_resized" style="width:74.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2024-01-10_2e40f9b49d622.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/56906" rel="nofollow noopener">(BRAND NEW) Ams Filament Pull Back Fix V2 Upgraded - Completely New Design Upgrade For Ams Filament Pull Back ERROR! Precisely Measured</a>&nbsp;<figure class="image image_resized" style="width:75.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2024-01-10_9c729f1a3501a.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/52782" rel="nofollow noopener">- Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:75.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2024-01-10_14c8811c47696.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">- V2 Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:76.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2024-01-10_6194006084695.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/53037" rel="nofollow noopener">- Ams Fix - Stack the Ams on tp (Using a carefully measured holder to hold the Ptfe in a curved angle that will allow filament to go through with the least possible amount of friction when the Ams is stacked on tp of the printer)</a>&nbsp;<figure class="image image_resized" style="width:77.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2024-01-10_e6ff2df6c7873.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/58543" rel="nofollow noopener">- Ams Buffer Ptfe Right Guide Mount Fix will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder.</a>&nbsp;<figure class="image image_resized" style="width:78.46%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2024-01-10_f95cf24ce5c9e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">- V2 Ams Buffer Right Ptfe Guide Mount - The Fix For Failed To Pull Back Filament a newly improved fix designed to replaced the V1 This will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder. ez Installation. No screws needed!</a>&nbsp;<figure class="image image_resized" style="width:79.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2024-01-10_6ddf689393292.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/63021" rel="nofollow noopener">- Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:82.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2024-01-10_4c9e59fa5529e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/103987" rel="nofollow noopener">- V2 Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:81.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2024-01-10_69d2ccb8ac279.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/67779" rel="nofollow noopener">- The Smooth 4 Way Splitter. Look No Further. Combined with Ams Hub Lite together with this small attachment, you will have the Smooth 4 Way Splitter.</a>&nbsp;<figure class="image image_resized" style="width:83.64%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2023-11-19_96f9eed020e9b.gif"></figure>&nbsp;<h2>Technical Write Up</h2>Friction - The cause of most of the Ams filament failed to retract problem.<img src="https://makerworld.bblmw.com/makerworld/draft/393292/2023-10-30_0043cfcafcbe9.jpg"> As shown in the following photo, the Ptfe tube that connects the Ams to the Ams Single Buffer HUB may and is often bent in an angle due to the printer placement like too close to the wall or foreign objects pushing against the Ptfe tube behind the printer or simply because of the height or placement of the Ams unit.&nbsp;All of these creates bends or pressure on the shape of the Ptfe tube in turn creates a lot of friction, as the Printer and Ams is equipped with multiple sensors, these friction will cause filament not passing through the Ams to the printer smoothly and thus causing the Ams Failed To Retract Filament Error and similarly related errors.&nbsp;This information is also written in Bambu wiki<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393292/2023-11-01_969b749ffc7e.png"></figure>&nbsp;&nbsp;So what is the possible solution to the problem? Firstly we need to reduce friction for filament passing through Ptfe tubes? Simple! A good curvature Angle. If we optimise the angle of the Ptfe it will allow the filament to go through with the least amount of friction and pressure.&nbsp;&nbsp;So what i have created to solve the problem? I have measured then created about 20 different test prints of curvature needed to allow the filament to move from the Ams to the printer extruder smoothly and freely and retract back with the least amount of pressure and friction. This fix can solve also wear issue on the Ptfe tube as less friction means less wear.&nbsp;&nbsp;What do i need in additional to installing this printed fix part? Nothing.&nbsp;<h2>Additional Notes</h2>The error itself is complicated and non definitive. Whatever cause the error today might not be the same area that cause the error again, same with person A and Person B setup, as the error itself is mainly due to tension with friction triggering the sensors in the machine.&nbsp;I would suggest you download and try and install all my fixes together for the proper effect as together they will ensure a smooth delivery of the filament with much lesser friction (read write ups) and hopefully that will help and reduce or resolve the error. If you use only one or 2 of the fixes the error could still happen as there are still other area might still be causing excessive friction.

AMS Fix Stack The AMS on Top and Fix For Failed To Retract Filament Error

Bambulabs P1S Helpers

MadMax3D

I love making lithophanes because they are colorful and easy to print. For best viewing, they need a brighter light than one tealight can provide. I designed a display system that can use up to 3 tealights or a USB light stick. The top of the display case lifts off easily to change out the hexaphane slides. The storage rack on the back of the case has room for six additional slides. &nbsp;Update - I added a new top frame with no tealight holes to the “display case only” profile (also as stl in the download section). Use this top if not using tealights and only using the USB stick light.&nbsp;<a target="_blank" href="https://makerworld.com/en/u/2612385699/collections/54109" rel="nofollow noopener">More Hexaphane Themes</a>&nbsp;<a target="_blank" href="https://www.amazon.com/PATIKIL-Portable-Reading-Sleeping-Camping/dp/B0BBQ3B8Y7/ref=sr_1_9?crid=3UE8G2JC9CNKG&keywords=usb%2Bstick%2Blight&qid=1697841206&s=hi&sprefix=usb%2Bstick%2Blight%2Ctools%2C88&sr=1-9&th=1" rel="nofollow noopener">USB Light</a><a target="_blank" href="https://www.amazon.com/gp/product/B08FM3ZQ27/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1" rel="nofollow noopener">USB Extender Cables</a>&nbsp;Printing Instructions&nbsp;A multi-material printing system is strongly suggested. There are 16 color changes for each slide. I have provided two .3MF files for Bambu Studio; one with the display case only and the other with all five lithophanes for easy printing on Bambu Labs printers. For other slicers, there are several steps required to generate the hex shape. Each lithophane was created at <a target="_blank" href="https://lithophanemaker.com/Color%20Lithophane.html" rel="nofollow noopener">Lithophanemaker.com</a> using these settings:&nbsp;Lithophane Resolution: 0.2 Colored Resolution: 0.8 Layer Height: 0.1 Width: 115 Maximum Thickness: 2.5 Minimum Thickness: 0.8 Height: 115.00 First Layer Height: 0.2 Filaments for Color Palette: Printed Solid CMYK&nbsp;This generates a 115mm square lithophane. You can generate your own 115m square lithophane using these settings and create the hex shape using the procedure below. Use the “Hex Mask” stl to create a negative volume object on top of the lithophane.<ul><li>Slicer set for .1mm layer height. .2mm on first layer. 100% infill</li><li>Load the 5 .stls for one of the lithophanes as a single object with multiple parts.</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140420/2023-10-20_3r4ei1qnttat.png"></figure><ul><li>Assign the colors to each part of the assembly</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140420/2023-10-20_9s4sq841cadu.png"></figure><ul><li>Drag the “hex mask” stl onto the plate and center it over the lithophane</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140420/2023-10-20_df68xoyrtgug.png"></figure><ul><li>Select all the objects and assemble the mask to the lithophane</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140420/2023-10-20_ux014lw0znz2.png"></figure><ul><li>Convert the hex mask object to a negative part</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140420/2023-10-20_n8s1e09hgqu2.png"></figure><ul><li>When sliced, it will create a hexagonal lithophane with a .6mm border to slide into the display case and rack</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140420/2023-10-20_gkifhl7f1ol0.png"></figure>I used the following IIIDMax PLA+ colors, but you can use similar colors from any manufacturer.<figure class="table"><table><thead><tr><th>IIIDMax Colors</th><th>RGB</th><th>Hex</th></tr></thead><tbody><tr><th>White</th><td>231,231,224</td><td>#e7e7e0</td></tr><tr><th>Yellow</th><td>246,196,45</td><td>#f6c42d</td></tr><tr><th>Light Blue</th><td>34,155,213</td><td>#229bd5</td></tr><tr><th>Fuchsia</th><td>162,70,141</td><td>#a2468d</td></tr></tbody></table></figure>&nbsp;

"Hexaphane" Display System With Halloween Scenes

lithopanes

MottN.

This is a fun model to print that will be at home in any office or study. It is meant to hang by two points from the top, but I will probably make some sort of stand for it in the future. &nbsp;I didn’t get time to get quite everything I wanted in to this one so it might get a future update to motorize the propeller and a proper stand, and perhaps I will make a version that is more of a toy and less of a model – this version is fairly delicate and is more meant to be displayed than played with. &nbsp;Printing:There are a lot of small details in this model – I recommend 0.16 or 0.12 mm layer height, but if you have to 0.2mm will work.The only part that needs support is the middle section of the balloon. Support it from buildplate only around the perimeter and block the supports for the middle pegs. My print profile is set up to optimally orient everything and with the few color pieces already done. I used the Textured PEI prints for everything but the fins and blades, but whatever buildplate you choose should work. You will need to print the following parts:<ul><li>Main balloon<ul><li>Balloon parts (all 3)</li><li>2x small hoops</li><li>2x large hoops</li><li>Fin ring</li><li>6x longitudinal</li><li>4x connecting pins</li><li>2x fins</li></ul></li><li>Other components<ul><li>Boat</li><li>Prop mount</li><li>Prop clip</li><li>Blade hub</li><li>5x blades</li><li>2x rope</li></ul></li></ul>&nbsp;Assembly:All parts are meant to snap together. &nbsp;To assemble the balloon:&nbsp;<ol><li>Start with the front end of the balloon and snap the small hoop over the front, lining up the notches in top and bottom of the hoop and the balloon piece. Fit the larger hoop into place, lining its notches up as well. Note that there is a correct orientation for each hoop that matches the curvature of the balloon. If you can't get it to fit, try flipping it around. </li><li>Insert 2 body pins into the balloon piece </li><li>Do the same for the rear balloon piece</li><li>Both parts should look like this:</li><li><img src="https://makerworld.bblmw.com/makerworld/draft/277369/2023-12-16_39c6d615d9ed3.jpg"></li><li>Assemble both pieces together with the central balloon piece. Make sure that the brackets on the middle two hoops are aligned to each other (if they aren't flip front or back 180°). </li><li>Hook the front piece of each of longitudinals onto the outer surface and snap into place on the hoops.</li><li><img src="https://makerworld.bblmw.com/makerworld/draft/277369/2023-12-16_7b50e4132984e.jpg"></li><li>Slide the rear hoop piece over the tails of each of the longitudinals, making sure that the notches where the fins attach are pointing out. This will be a snug fit to ensure the whole thing stays together.</li><li>Insert the fins into their slots at the back.</li></ol>&nbsp;To assemble the rest:<ol><li>Carefully insert the blades into each of the slots on the blade hub/propeller.</li><li>Connect it with the prop pin into the hub/motor that gets connected at the rear of the boat.</li><li><img src="https://makerworld.bblmw.com/makerworld/draft/277369/2023-12-16_1a7e0236ee33c.jpg"></li><li>Insert the ropes into the side of the boat and bend over the tails to form affix</li><li><img src="https://makerworld.bblmw.com/makerworld/draft/277369/2023-12-16_d05481416f0cd.jpg"></li><li>Similarly, insert the other end of the rope part into the balloon brackets and bend over to form a semi-permanent connection</li><li>Clip the blade/propeller assembly onto the back of the boat. </li></ol>

Whimsical Airship

Decor

Allthebuz3D

Zelda Hylian Shield Ornament or Fridge Magnet! Must print in separate pieces. No supports and minimal glue.&nbsp;meant for a magnet size 10x3mm.

Zelda Hylian Shield Christmas Ornament

Keychains

miniShev

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a target="_blank" href="https://www.patreon.com/minishev" rel="nofollow noopener">https://www.patreon.com/minishev</a>Patrons have access to all my files in one place, supported miniatures, a request board, as well as commercial options! Come check it out :-)

Mesh Basilisk

dragons

3D design shop

I made this version of deadpool, with a cool detail where you can pull out his sword.&nbsp;&nbsp;&nbsp;design by eastman on printables. https://www.printables.com/model/36689-deadpool-bust-remastered-supportless-edition-stl

Deadpool bust ( with removable swords )

busts

Delphant

<h3>Articulated Minecraft Creeper: Print-In-Place</h3><ul><li>From the best-selling video game Minecraft!</li><li>Print-In-Place and fully articulated.</li><li>Optional face pieces included.</li><li>Designed in Fusion 360.</li><li>UPDATE 3/28/2024:<ul><li>Fixed model orientation.</li><li>Made Head stronger.</li><li>Default Head rotation +90 deg for single extruder filament swap for new extruded face option (FACE_EXT ver).</li><li>Modified how built-in supports work, this should allow for easier removal (NO_SUP ver).</li><li>Added a version that needs support for a better overhang on the upper legs (SUP ver).</li></ul></li><li>UPDATE 5/27/2024:<ul><li>New version with a standard .3mm tolerance between joints. When I received my A1 and used out-of-the-box settings, I noticed joints were hard to move, so I&#39;ve added a new version with a .3mm gap to help with breaking apart the joints.</li></ul></li></ul><h4>Printing:</h4><ul><li>NOTE: This model was designed with a .4mm nozzle in mind, other sized nozzles may not work. Scale at your own risk.</li><li>Printed at .2mm layer height with 20% gyroid infill and 3 walls.</li><li>Use the default orientation.  </li><li>FOR Creeper_NO_SUP and Creeper_NO_SUP_FACE_EXT<ul><li>Supports are not required, this version will have worse overhangs.</li><li>DO NOT repair the model; doing so will remove the custom supports, causing the legs to print fully in mid-air.</li><li>Turn off Detect Overhang Walls.</li></ul></li></ul><figure class="image image_resized" style="width: 28.7%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079668/design/2024-03-28_61e260b20774a.png"></figure><ul><li>FOR Creeper_SUP and Creeper_SUP_FACE_EXT<ul><li>Print using supports.<ul><li>Only needed under floating legs, paint-fill overhang.</li><li>Tree and Snug work well.</li></ul></li></ul></li></ul><figure class="image image_resized" style="width: 39.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079668/design/2024-03-28_9bad01bfe4aa4.png"></figure>&nbsp;<h4>Clean Up:</h4><ul><li>After printing, the head and legs should snap apart, allowing them to rotate freely.<ul><li>Be careful not to apply too much pressure when releasing the joints.</li></ul></li><li>You can also print the optional Creeper face and use super glue to adhere the pieces (for Creeper_NO_SUP and Creeper_SUP).</li></ul><figure class="image image_resized image-style-align-center" style="width: 50%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000079668/design/2023-12-01_c4nzw09ks0xi.png"></figure>Design Iterations

Articulated Minecraft Creeper: Print-In-Place

Gaming

dohara1985

I didn't care for the witch earrings out there, so I made these custom witch earrings.

Witch Earrings

Earrings

Halloween

R C 3D

SUMMARY:This model is a set of coasters with a fallout theme. I've included a variety of coasters to pick from, and a vault to encase them. The latest vault is designed without threads, and instead uses magnets that not only align the vault sections, but also makes the coasters easily accessible. &nbsp;Printing/Post-Processing:If you decide not to use the print profiles, these are the settings I used.&nbsp;<ul><li>For the coasters themselves, you can print with 0.2mm default profile. I recommend a higher number of top layers if you want to minimize the amount of infill that's visible.</li><li>For the vault, I used 0.2mm layer height on the bottom, and 0.12mm layer height on the top for finer detail. I also used 3 wall loops, and Arachne wall generator.<ul><li>You will need to program in a pause on each piece to insert magnets. They will be pretty tight, but will print directly on top of them so they aren't loose when complete.<ul><li>For the top portion, schedule a pause at layer 21 (if using 0.12mm layer height) or 2.6mm in height.</li><li>For the bottom portion, schedule a pause at layer 162 (if using 0.2mm layer height) or 32.4mm in height.</li></ul></li></ul></li><li>The cavity for the magnets is 2.6mm high, and 8.1mm in diameter. I used 8x2mm neodymium magnets and that worked great. As soon as the print pauses, you'll drop in the magnets. You will need to ensure they are facing the right direction, or it will not work. See the images for reference. <ul><li>Note that all magnets are not required. You will need enough magnets on each side to align at least 2 sections or it won't be secure, but I recommend at least 4 in each.</li></ul></li></ul>&nbsp;&nbsp;CHANGELOG:&nbsp;UPDATE (12/20/2023)Added a non-threaded vault that uses magnets to close. This can be printed without supports, and automatically aligns the vault sections.&nbsp;INITIAL RELEASE (9/28/2023)Uploaded from printables. File includes the coasters, and threaded vault.

Coaster & Coaster Holder

Fallout

3DPrintNovesia

Nearly every 3d printed wallet is a hardcase wassel or card holder; thats okay but I'm not a fan of it and I also need space for cash and the change. So lets break down a simple normal wallet:<ul><li>its foldable</li><li>space for cards</li><li>space for bills</li><li>and a coin pocket</li></ul>&nbsp;Alright lets take these four topics to design the perfect 3D printed wallet. I don't want a hardcase wallet and it should be foldable?<ul><li>Only solution here is, flexible material. so I choose TPU with a shore hardness of 95A</li></ul>&nbsp;Space for Cards and for Bills aren't that challenging. I just need to create small pockets which dont fuse together while printing. Thats how I came up with the design and Print orientation like it is. Closed and standing up. There are 3 Slots for 3-4 Cards each! so up to 12 Cards in total! The most challenging part to design was the coin pocket. I don't wanted to change the orientation of the model so I needed to fit it in like the model was set. I designed it so it can be enlarged by itself after printing. And also the lash ist coming down perfect so the holes for the buttons will just allign perfectly. I use this push buttons for the coinpocket, you can find it on <a target="_blank" href="https://www.amazon.de/gp/product/B000P15BLC/ref=as_li_tl?ie=UTF8&camp=1638&creative=6742&creativeASIN=B000P15BLC&linkCode=as2&tag=machmal3d01-21&linkId=5bd54badec361b091f4c49e5d0c0d93e" rel="nofollow noopener">Amazon</a>. Since then I used it as my regular wallet and it survived without any damage. It just got a little bit dirty over the time while i tested it by using it every day!<img src="https://media.printables.com/media/prints/244206/rich_content/480e74fa-6151-4793-a7c8-82bcebe06c56/ezgifcom-gif-maker-1.gif"> Print it standing up, like it’s orientated in the file. Use a brim to get better bed adhesion! Use 2 Perimeter and Infill around 30%, no Support and ofcourse use TPU

Flexible TPU Wallet with Coinpocket! (Print in Place)

Random Items

cube3dworld

CHRISTMAS KEYCHAINS / DECOR FOR CHRISTMAS TREE Make people smile!&nbsp;Tips: - Change the color in Slicer, it looks better. - You can hang them on christmas tree as well. - You can send them togerther with christmas card to people you love.&nbsp;ALL CUBE3DWORLD designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.