Piitaya

K-Studio.ca

LED Sleeper Mount for P1S, please leave comments and feedbacks for this beta model; I don&#39;t know how well it will fit X1C / P1P.<ul><li>Retain the same printer height profile, no riser.</li><li>This is a sleeper mount, hidden LED inside the chassis.</li><li>Anti-Glare shield / limit light leakage out at the top.</li><li>Total 4 pieces frame.</li><li>3 pegs clip to hold the frame together.</li><li>Support LED strip up to 14 mm in width.</li><li>Corner bend perfectly for LED strip.</li><li>Left side and right side frame has two screws hole each.<ul><li>Left side frame two screws are the left panel screws. Middle hole one is lower.</li><li>Right side frame two screw are the right panel screws. Middle hole one is higher.</li></ul></li></ul><h4>Release History</h4><blockquote>March 25, 2024STEP files are available.</blockquote><blockquote>March 16, 2024 - Beta 1.01Optional upgrade if you find the front piece is too flimsy.</blockquote><blockquote>March 11, 2024 - Beta 1.0Initial release.</blockquote><h4>Instruction for Beta 1.0</h4>For Beta 1.01, it will only have two pegs.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000248274/design/2024-03-11_681c38b1d5b71.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000248274/design/2024-03-11_ebb132a822d808.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000248274/design/2024-03-11_089673b0286448.jpg"><figcaption>Peg inserted from inner side.</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000248274/design/2024-03-11_9a6287697d2e6.jpg"><figcaption>Left frame uses the lower screw hole as shown here.</figcaption></figure>&nbsp;

LED Sleeper Mount (Beta) - P1S

Printer

Printgeluk

A simple model of a ladder and a man. You can place the man on the top step of the ladder and let it fall and flip over and down the ladder. I've made 2 versions of the man, one is a little wider at the neck to prevent it from breaking too easily. Please let me know how this prints for you! In V3.0 I made the holes in the base of the ladder a little wider to make it easier to fit the ladder into the holes. It is however still a tight fit to keep the ladder stable and prevent it from swaying. I printed this in Bambu Basic PLA.&nbsp;Update: I added some print profiles for A1 Mini with a shorter ladder so it can fit the A1 Mini's build plate.

Falling Man Ladder Toy

Toys

schiko

I was asked if I could create a hotend holder similar to my <a target="_blank" href="https://www.printables.com/model/629756-skadis-34-nozzles-holder-for-bambu-lab-a1-mini" rel="nofollow noopener">existing version for the A1 (mini)</a>. So here it is, a holder for 3 or 4 assembled Bambu Lab hotends (X1…/P1…) for Ikea Skadis.&nbsp;No support needed. Just print as oriented in the stl files and take care that the pegs are massive. I used a modifier cube with 100% concentric infill (see print profile).&nbsp;The holder is quite flat, so I recommend using the <a target="_blank" href="https://makerworld.com/en/models/92747" rel="nofollow noopener">Skadis Lock Plug</a> (10mm) to prevent the holder from sliding out of the pegboard holes.