Twisted010

Pulsar Designs

Important: new and improved Seed Planter Tool V2 now available on my profile! Improved strength, design, and comfort!<a target="_blank" href="https://makerworld.com/en/models/443836#profileId-350000" rel="nofollow noopener">https://makerworld.com/en/models/443836#profileId-350000</a>&nbsp;This seed planter tool makes planting seeds a breeze! Put away your pencil and make perfect holes every time. This tool features lines every 10mm, for up to 50mm depth measurement. This is handy for seeds with certain depth recommendations. Remember: an inch is about 2.5cm, so each line represents 0.4 inches.&nbsp;&nbsp;

Seed Planter Tool

garden

Josh-3D

A set of Mini Cansters! Previously I made a set of <a target="_blank" href="https://makerworld.com/en/models/161251#profileId-177000" rel="nofollow noopener">Sci-Fi inspired canisters</a>. They were big, they were cool, but the smaller of the models weren&#39;t as practical because of some of the proportions. The aim here was to shrink the model overall, going from using M4 screws down to M3 screws. A number of tweaks were made along the way to tighten tolerances up even further.&nbsp;<figure class="image image_resized" style="width:39.39%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446925/design/2024-04-28_7e95db4246c17.png"></figure>&nbsp;Assembly and Parts needed&nbsp;Hardware:8 x M3x16mm (Or longer) screws&nbsp;Assembly should be pretty straight forward. Just screw the ends on and call it a day.&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.&nbsp;

Mini Canisters

containers

kisik20

Description• Educational Toy. This Kids Montessori Educational Stick Men Puzzle Game is designed to stimulate children&#39;s minds, enhancing their hand skill and fine motor training.• Sport Theme :With its sport-themed design, this puzzle game not only provides entertainment but also fosters an active lifestyle among kids.• Age Recommendation :Recommended for children aged 3-6 years, this toy is perfect for developing young minds and hands.• Stimulates Imagination :This toy aims to spark your child&#39;s imagination, encouraging them to create different stories and scenarios.&nbsp;Feature:Stick Puzzle Game for Baby Fine Motor Skill TrainingFlexible, changeable puzzle game, that enhance children&#39;s imaginationLearning and Education Toy for KidsMontessori Educational Game for Children

Montessori Educational Stick Men for kids

school

Kevyn 3D

I made this pixel puzzle with the Makerlab tool on Makerworld.&nbsp;Powered by Pixel Puzzle Maker from MakerWorld.(https://makerworld.com/makerlab/pixelPuzzleMaker)

Bulbasaur Pokémon pixel art

pixelart

jared.l.j.carey

Simple 3D Printed Torch made for the BambuLab Led Lamp Kit A simple, portable and handy alternative lighting solution that can be printed in a few hours and is powered by the Bambu Lab LED Lamp Kit. Simply plug in a portable battery and you are ready to whether its indoor or outdoor use. Finally the simple snap cap of the torch makes it easy to put in/take out your Lamp Kit whenever needed.

Hollow Torch Lamp LED Kit 001

outdoor

neo862

A height block compatible with Gravitrax from Ravensburger. The bricks corresponds to 5 or 10 original dark grey height bricks and has tunnels through which the long tracks can be guided. Perfectly suitable for Gravitrax platforms.&nbsp;*** UPDATE ***I heard you guys. Now with an optimized connector that is a little less tight and shouldn't break off as easily.  Ein Höhenstein kompatibel zu Gravitrax von Ravensburger. Der Stein entspricht 5 bzw. 10 orginal dunkelgrauen Höhensteinen und hat tunnels durch die man die langen Schienen führen kann. Perfekt geeignet für Gravitrax Platformen.&nbsp;*** UPDATE ***Ich habe euch gehört Leute. Jetzt mit einem optimierten Verbinder der etwas weniger fest sitzt und nicht mehr so leicht abbrechen sollte.

Gravitrax Heightstones with tunnels

gravitrax

Welcome to Office Putt'z starter kit.&nbsp;No office would be complete without it's very own golf course, practice and hone your skills so that you can take your A game to the real courses. (coming soon to an office near you)&nbsp;Make sure to download the office Putt'z backdrops from my profile for complete immersion.&nbsp;&nbsp;Info<ul><li>works best with a 9mm steel ball, but you can also use the 3d printed ball, make sure to sand the ball down.</li><li>Some parts come in two sections for easier printing.</li></ul>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/albionrapture" rel="nofollow noopener">Buy Me A Coffee</a>

Office Putt'z - Starter Kit

piet

murray.crane

(NOTE: This is a direct re-upload of Wookbert's IKEA Samla Clips (and photos) from Thingiverse. I am not Wookbert, I just agree that these are, without a doubt, the very best self-make lid clips for Samla storage boxes. If you find these useful and you want to repay the kindness, go to <a target="_blank" href="https://www.thingiverse.com/thing:2110134" rel="nofollow noopener">Wookbert's Thingiverse page</a> and tip him. I just want to ensure these are available everywhere they possibly can be.)&nbsp;Samla is (probably) a registered trade mark of IKEA. This clip is – needless to say – not to be confused with a genuine IKEA product. It is solely a self-printable addition for the popular Samla boxes made by IKEA. So please, dear Ikea legal team, take a relaxed sip from your coffee mugs and move on to something else.&nbsp;–––– NEW! Now also in 45/65 Liter version. ––––&nbsp;I know „The best one“ sounds arrogant and bold, but let me explain:You can find quite a few locking clip designs for the IKEA Samla boxes here on Thingiverse, but most of them just don't work as satisfying as they should. I've tested them all and found that they are either too small, too massive, don't snap securely, slide/slip, interfere on stacking or simply can't be grabbed/handled properly. Interestingly even the original clips IKEA itself offers suck (they seriously do).&nbsp;Being a, what I call, pixel f*cker, I made no less than 10 (!) revisions of the final design, tweaking dimensions in steps of tenths of millimeters, and playing with various degrees of pretension, until I came up with the perfect clip, one which really works as one would expect:&nbsp;• Excellent thumb handling • Tight and secure grip with satisfying snap • Correct stiffness vs. flexibility ratio: As thick as necessary, as thin as possible • No interference on stacking. • Versions for 5/11/22 Liter and 45/65 Liter boxes. • Harmonically rounded, so actually also good looking. Also feels good.&nbsp;Save your time and filament, skip the mediocre experience with other designs and go with this clip. Satisfaction guaranteed!&nbsp;Adjustable in lengthThe clip is based on a simple extrusion, which means you can scale the length as desired. It has been initially designed with 36 mm in length (which is what you see in the preview), but snaps and handles just as good and tight, at 22 mm. I wouldn't go any shorter than that however, as it then becomes inconvenient to grab with the thumb on opening.&nbsp;Print orientationPlace sideways on your print bed, so clips get printed in extrusion direction.&nbsp;Material suggestionIf your printer supports ABS, I recommend it over PLA. PLA has a harder surface, which leaves some scratch marks on the Samla lid (which is made from rather soft PP (Polyproylene)). ABS is a bit softer and doesn't leave any marks based on my experience. PETG also works nicely.&nbsp;Avoid elephant feetA common problem with FDM printing on heated beds are elephant feet, which is especially annoying with a continuous extrusion profile like this where. Imagine the end which sits on the print bed to come out thicker, which leads to an imperfect fit when attached to the Samla lid. If you have a Dual-Material Printer, like I do, you can avoid this by printing with a raft in an easily separable material. For ABS for instance PLA is a good raft material. For PLA, I suggest for instance PolyMaker PolySupport.&nbsp;Thanks and enjoy, André&nbsp;Print Settings<ul><li>Printer brand: CEL</li><li>Printer: CEL Robox</li><li>Resolution: Normal (0.2 mm layers)</li><li>Infill: around 20%</li><li>Notes: Samples shown printed with 0.3 and 0.4 mm nozzles in ABS. Works nicely in ABS and PLA, but also any Co-Polyester, like Colorfabb’s XT and nGen. PETG also works nicely.</li></ul>

Ikea Samla Clip. The best one. Period. (5.11.22.45.65 Liter) by Wookbert

ikea

dachu02

Simple and functional Xbox Controller standprint on side, 2 walls + 20% of infillPETG recommended

Xbox pad controller stand

jesper

OxSox

This is a shelving bracket system sized to fit most popular thickness of plywood / sheet goods. &nbsp;These brackets will allow you to create custom storage solutions for your home or office. &nbsp;Models come in different forms:<ul><li>Front (do not having additional support)</li><li>Back (do have additional support)</li><li>With screw holes. </li></ul>How you attach these to your surface is up to you. I prefer to drill my own holes and make custom joinery, but I have added models with screw holes built into the model for convenience. &nbsp;Printing&nbsp;I've added 3 walls and 25% infill to ensure strong brackets. Depending on the use and weight that will be on the shelves it may be worth increasding the infill.&nbsp;North American conversions&nbsp;<figure class="image image_resized" style="width:70.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/588440/2024-02-25_b8760b9471a6e.png"></figure>&nbsp;All models use a 0.3mm tolerance. Plywood and other sheet goods thickness can range due to a few different causes:<ul><li>Factory tolerances</li><li>Paint</li><li>Sanding </li></ul>Check your materials thickness before printing. I have included “Test fit” models if you are unsure. &nbsp;Please let me know if you would like any additional brackets, or additional thicknesses.

Shelving bracket system

shelf

bringle

Parking brake for your bike, should fit handles bars up to 31mm-32mm in diameter.Edit 09/04/23: Had a failure on the outside of the big loop, updated the model to be slightly beefier in that area. Look for the v3 model below.

Bike Parking Brake

bike

ex2512

一款实用且有趣的收纳盒。

U盘收纳盒魔方Usb flash drive storage box Rubik's cube

speedcube

braga3dprint

The 3D model of a simple lightbox is a tribute to the beloved world of creativity and building. This minimalistic yet iconic design showcases a symbol of imagination and play. When illuminated, the lightbox brings a sense of nostalgia and fun, making it an ideal addition to any enthusiast's collection or a child's room. Let the warm glow of this lightbox kindle the spirit of innovation and creativity in your space, paying homage to the timeless joy of building blocks. It's not just a lightbox; it's a beacon of inspiration. 🌟🧱🌈 If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print, it may interfere, specially with bigger prints! <img src="https://i.redd.it/uo838wkstaqa1.png">&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB or go wild with RGB - as long as the LED density isn't too low (very few LED's per meter) you should be able to achieve a good result- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Brick Building Block Lightbox LED Lamp

lego

E9-3D

Please consider supporting me with a boost on the new system, would love to have more recourses available to make and share Models!! Baby Groot has again entered the gaming realm, protecting your headset ! Remember to check out my other headset stands. OBS Make sure to check your PURGE settings , and always make sure your filament is calibrated!!

Baby Groot Headset stand

nintendo

Whadup

Suggested print settings for the Main Body:<ul><li>Layer height 0.2mm.</li><li>Infill 20%.</li><li>Perimeters: 5 (for strength and aesthetic).</li><li>No supports are needed.</li></ul>&nbsp;Suggested print settings for Micro SD attachment:<ul><li>Layer height 0.2mm.</li><li>Infill 15%.</li><li>Brim: Width 2mm.</li><li>Brim Separation Gap: 0.2mm.</li><li>No supports are needed but follow the suggested print orientation for ideal results.</li></ul>&nbsp;Suggested print settings for Cover - Ace of Spade:<ul><li>Layer height 0.2mm.</li><li>Infill 20%.</li><li>Perimeters: 5 (for strength and aesthetic).</li><li>No supports are needed.</li></ul>&nbsp;NOTE Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.&nbsp;&nbsp;Changelog<ul><li>19 Oct 2023: New cover design - Ace of Spade.</li><li>12 Oct 2023: Introduced an attachment that converts one of the SD card slots into a holder for 4 Micro SD cards.</li></ul>

Minimalistic Card-sized SD Card Holder

camera

Warrior Made Designs

Acorn stash box for pills, money, rings or anything that fits! Cops won't go near it!

Acorn Stash Pill Canister

geocaching

SJHCreate

This is a print in place model. It should freely spin, but it may need some lubricant. Besides that it works just fine and it's quick and easy to print.

Keychain Spinner 

fidget

KYZ Design

<ul><li>I recommend using ASA, and if that's not available to you, then use PETG. You can use my PETG print profile to print ASA (or PLA) - just change the material in the app when you print.</li><li>You can use PLA but they won't last as long in direct sunlight. If you are going to use PLA, consider using black as the “carbon black” dye absorbs some of the UV.</li><li>Make a test print first. If your wires are too thick, increase the scale as necessary (someone mentioned 105% worked for them, your scaling may need to be higher). And upload your scaled print profile with the model/brand/details for others!</li><li>Get gauge 6 or smaller screws.</li></ul>If you want a more festive version, <a target="_blank" href="https://makerworld.com/en/models/67964" rel="nofollow noopener">see this model</a>!<img src="https://makerworld.bblmw.com/makerworld/draft/185147/2023-11-19_dc9e9b030aeac.png">&nbsp;

Christmas/Fairy Light Fence Mount

at home

TomMi

Low poly turtle for bottle cap use. :) dont waste the cap, use it!&nbsp;remix of <a target="_blank" href="https://www.thingiverse.com/thing:6445540" rel="nofollow noopener">https://www.thingiverse.com/thing:6445540</a> please feel free to leave a comment, rating add a real photo&nbsp;&nbsp;

Low-poly bottle cap creature

creative

office

Neebick

Simple carry along pill organizer with a weather resistant TPU seal built into the lid. Pocketable and strong. Stays closed and can take vigorous shaking. Fits into luggage and backpacks easily. Similar size to common battery packs. All cavities have a scooped bottom for easier removal of pills by finger.&nbsp;Tested by running under a running bathtub faucet. Do NOT submerge. This should only be considered for splashes of water/rain and dirt.&nbsp;<h3>Printing</h3>Printing is fairly straight forward:<ul><li>The inner sleeve/organizer part is printed on it's side due to the oval shape and text. No supports are necessary for the interior but there is some bridging that slower print speeds may help with.</li><li>All outer sleeve are a very easy print without any special consideration</li><li>The TPU seal needs to be print with the wide top against the plate with a small amount of supports for the outer bridging. There will be stringing due to the nature of TPU. But those areas can either be cleaned up with a hair dryer or ignored since they will covered during assembly.</li><li>The lid prints with the flat top against the plate.</li></ul><h3>Assembly</h3><figure class="image image_resized" style="width:25.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/626931/2024-02-24_b07ebba9642308.png"><figcaption>1. Clean supports from parts</figcaption></figure><figure class="image image_resized" style="width:25.88%;"><img src="https://makerworld.bblmw.com/makerworld/draft/626931/2024-02-24_1b3314aa2a4e98.png"><figcaption>2. Slide TPU seal over lid</figcaption></figure><figure class="image image_resized" style="width:25.17%;"><img src="https://makerworld.bblmw.com/makerworld/draft/626931/2024-02-24_cd7ef4ebc6a0f8.png"><figcaption>3. Snap Lid over inner sleeve (Glue adds strength)</figcaption></figure><figure class="image image_resized" style="width:25.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/626931/2024-02-24_d0a98e3c3624c8.png"><figcaption>4. Insert Inner Sleeve into Outer Sleeve</figcaption></figure>

Weather Resistant Sealed Pill Organizer

bathroom

El Jeffe

I needed a way to connect the lightbar I bought off amazon to my A1 Mini. This allows the handle so also be moved easily with the added handle. Remove the cover at the top of the A1 mini Z-axis and replace it with this handle, and secure it with the original screws&nbsp;Lightbar:<a target="_blank" href="https://www.amazon.com/dp/B08FX1YPFL" rel="nofollow noopener">https://www.amazon.com/dp/B08FX1YPFL</a>&nbsp;Changelog:<ul><li>Added version 2 to print profiles.<ul><li>This version should go the length of the build plate instead of the backside.</li><li>Added a 15% infill version and a 45% infill version. The 45% version also has thicker walls.</li></ul></li></ul>

A1 Mini Handle w/ lightbar rail

printer

Yasoos

Uno card game box to keep my sons cards safe.Both pieces fit snug to each other I modified <a target="_blank" href="https://www.printables.com/model/71534-parametric-card-box-source-file-include" rel="nofollow noopener">https://www.printables.com/model/71534-parametric-card-box-source-file-include</a>with modifying the dimension as it is smaller and closing it and adding the logo.&nbsp;<figure class="image image_resized" style="width:51.85%;"><img src="https://makerworld.bblmw.com/makerworld/draft/145268/2023-11-04_703de93d23b16.png"></figure>If you have any questions or feedback let me know

Uno card game box

games

Many24

I liked the idea of swiss key holder, but could not find the one that would fit me, so made it myself. I designed it with only 2 bolts, as the 3rd middle would not allow for correct fit with my keys, but works just fine like this.&nbsp;<h3>Print instructions</h3><ul><li>Printed in PLA, but any material should do</li><li>No supports needed</li><li>3MF and gcode are double color, variable layer height</li><li>20% infill</li><li>3 perimeters</li></ul>&nbsp;<h3>Additional hardware needed</h3><ul><li>1x M3 locknut</li><li>1x M3 screw 10-20mm (depends on number of keys (M3x16 for 8 keys))</li></ul>