Picchietto

BjörnB

I have had so much problems with eSun PETG for the specific products i&#39;m printing. Zits, blobs, nozzle buildups, weak layer adhesion, etc.Well this is a PERFECT profile for me now! The before and after results are crazy.&nbsp;All you need to do here is a FLOW RATIO calibration and then just hit print!This profile i&#39;m sharing is for the SILVER PETG from Esun, and this particular color needs higher flow ratio than the other colors - like red, it&#39;s at 0.952, wile Silver is at 1.02.&nbsp;<h3>NOTE: I&#39;m now running this for ALL my PETG filament brands, not just eSun.</h3>

PETG filament and process PROFILES

Calibration

Toys_And_Stuff

This lightbox with the look of some nice kissing lips can be easily assembled without any glue or tools!It is designed to snap together in place and provides even mounting brackets for the LED strip and cable.&nbsp;This is the LED strip I used but I'm sure other similar LED strips will fit too (you will need about 0.5m of LEDs):<a target="_blank" href="https://amzn.eu/d/06IKclh" rel="nofollow noopener">https://amzn.eu/d/06IKclh</a><figure class="image image_resized" style="width:65.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326422/2023-12-29_9fb2c4070e3108.jpg"></figure>Now let's assemble it!<figure class="image image_resized" style="width:65.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326422/2023-12-29_ad5cb610ca89a.jpg"></figure>First put the LED strip through the hole from the back to the inside. &nbsp;<figure class="image image_resized" style="width:65.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326422/2023-12-29_9aa3e831aefc88.jpg"></figure>&nbsp;Push it all the way through until the beginning of the cable sheath lies next to the cable bracket as shown. It can be a little tight, so please be gentle.<figure class="image image_resized" style="width:65.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326422/2023-12-29_708c6036f3ba4.jpg"></figure>Now put the LED strip into the brackets as shown here.<figure class="image image_resized" style="width:65.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326422/2023-12-29_417f69dad48078.jpg"></figure>Cut off the overhang at one of the cutting marks on the LED strip.<figure class="image image_resized" style="width:65.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326422/2023-12-29_e1daa748fcc31.jpg"></figure>&nbsp;Tighten the cable to the bracket as shown.You can use a zip tie or some wire from the packaging when you don't have zip ties laying around.&nbsp;<figure class="image image_resized" style="width:65.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326422/2023-12-29_a44bdd7f5309f.jpg"></figure>Now it should look like this. This is the perfect time to check the lights before putting it together.<figure class="image image_resized" style="width:65.03%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326422/2023-12-29_fb0f4df4d7e0c8.jpg"></figure>It's time to put it all together!I found it easier to fit one of the edges first and make my way to the other side but without pushing the two parts together completely.<figure class="image image_resized" style="width:65.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326422/2023-12-29_0a81004e0270d.jpg"></figure>Before pushing it all the way together, make sure that everything fits nicely!<figure class="image image_resized" style="width:65.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326422/2023-12-29_dd7f9d2ccf6e48.jpg"></figure>Now push it together and you should hear the brackets snapping into place.<figure class="image image_resized" style="width:65.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326422/2023-12-29_78d3d88d7353c.jpg"></figure>&nbsp;You're done!<figure class="image image_resized" style="width:65.11%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326422/2023-12-29_b3aad2499c3478.jpg"></figure>Have fun and don't forget to leave some pictures or a comment.

Kissing Lips Lightbox

Lightbixt

motor-fuzzi

Christmas is coming sooner than you think… Advents calender for "Kinderüberraschungs Ei" (kids surprise). Space for 24 eggs. Connect the doors and the container with a piece of filament. Of course you can also glue it together in different shapes.

Advent calendar Kinder Überraschung (Kids surprise)

Christmas

Øyvind

This is a marble machine with a lift that lifts three (or more) marbles simultaneously, and releases them to three separate tracks. Two of those tracks are connected in series, so a marble will therefore alternate between those tracks. The third track loops back onto itself, so to have traffic in all three tracks, you need at least two marbles.The machine has been designed for 8 mm balls as marbles, and the machine prints completely without supports if you have a well tuned printer. 8 mm steel balls will work fine, but I have also included a printed marble that can be used. The nice thing about printed marbles is that you can print several in different colors, which looks quite cool when running the machine. They also run a little slower than steel balls due to a little more friction against the tracks.Total amount of plastic to print this will be around 300 grams.<h3>Print Settings</h3>Rafts:NoSupports: <div>No</div>Resolution:AnyInfill: <div>15%</div>Notes:These settings are valid for the machine itself, the screw and the cap.<h3>Instructions</h3>Step 1<div>Print the machine itself first. This will be a long print, as it is a large object. I printed mine on a Duplicator i3 with a layer height of 0.25, infill 15% and a speed of 50 mm/s, sliced with S3D. The print time was a bit over 19 hours for the machine alone.The file that is postfixed with lower\_poly has a lower polygon count to allow it to fit into software packages that refuse to read the original file. I haven't printed this file myself, but I guess it should be OK. YMMV, though.Step 2Print the screw, the cap and the winder, these can be printed simultaneously, but I'd recommend placing the screw centered on the bed if you have a laterally moving bed. It is a tall print with little surface area, so ensure you have good adhesion to the bed. I'm printing on glass with a glue stick, and had no issues printing it. However, adding a brim might be a good idea if you have issues with the print being knocked down. Just make sure to clean the edge where the brim attaches to the part, as this should be quite sharp to wedge under the marbles at the start of the lift.The winder could use a little support just under the indentation, but I printed it without. I had to remove a tiny bit of stringing inside the indentation, but that's to be expected with no support.Step 3If you don't have steel balls of the correct size, try printing some marbles. Make sure to print them at 100% infill and a very fine resolution (I used 0.1 mm). The marbles are ready to print, and has been designed with built-in support that breaks away quite easily and leaves no scars on the ball. The part of the ball that is at the bottom of the support might need just a little sanding/filing to make the ball as round as possible.I made a quick video that shows how to assemble and use the machine. Sorry about the not-so-great video, it was just a quick and dirty shoot to show that the machine works quite well.</div>Category: Toys & Games