Peter Gara

Wayne

<h2>A super cool aperture structure has 5 stl files: top cover, door panel, slide rail, rotating mechanism, fixed cover, door panel and fixed cover need to be printed 6. It is recommended to print 8 door panels (easy to cross the edge, more spare) Note: the gaps between the active mechanisms have been adjusted, there is no need to set the horizontal expansion. It is recommended that the top and bottom layer are set 0.6mm, and the wall thickness is 1.6mm</h2>

The aperture structure

film

9percent

Slightly twisted ring holder.

Ring holder

deco

harrypulvirenti

It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs less pronounced to make the model easier to be printed. I strongly recommend using brim to print it if you don't want to see the heel fall.You can find the suggested orientation used to print the object in the images.With the proposed orientation the object should fit without scaling it, you will maybe just need to move it a little bit into position, but some user reported that scaling it down to 95% also works well. &nbsp;I tested it with my X1C and is perfectly compatible. About the P1P the original model was compatible with the P1P without enclosure and this remix have the same compatibility

Bambu Lab - Filament Poop Bin - X1, X1C, P1P and P1S

printer accessories 

hectorri

A 20mm size cube to basic print test. I made a display stand to all layer heights variants: <a target="_blank" href="https://makerworld.com/en/models/48746" rel="nofollow noopener">https://makerworld.com/en/models/48746</a> <img src="https://makerworld.bblmw.com/makerworld/draft/116605/2023-10-24_986a5722bc89.jpg">

Calibration cube XYZ

calibration

MakeIt3D

<h2>Summary</h2>Tired of receipts, dust, and other debris clouding your workspace?This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings.This print features a fully functioning built-in swing allowing you to store items inside without things accidently falling out.This item is easy to print featuring 2 main files<ul><li>LID STL</li><li>Bottom STL</li></ul>Total Size of the product is roughly 6 inches Height, 3.5 inches Width, 3.5 inches Length.Feel free to print out the designs and share photos of your results. I would love to see them. All MakeIt3D Designs are made and designed in-house. When you purchase any of these designs you do NOT have the rights to sell the digital files or printed models. 3D PRINTING SETTINGS Printer Used: Bambu Labs X1 Layer Height: 0.2 Infill: 10% - 15% Honeycomb Print Speed: Slow Speed on First Layers Material: PLA Wall Count: 2 Walls

3D Printable Mini Trash Can for Car and Office Use

useful stuff

AP Engineering

Remixes Available for other Food Dehydrators:<ul><li>Silvercrest 350W / Quigg 350W Food Dehydrator: <a target="_blank" href="https://makerworld.com/en/models/14105" rel="nofollow noopener">https://makerworld.com/en/models/14105</a></li><li>MisterChef® Professional Food Dehydrator, 250W: <a target="_blank" href="https://www.printables.com/model/499723-2-spool-dryer-base-for-us-model" rel="nofollow noopener">https://www.printables.com/model/499723-2-spool-dryer-base-for-us-model</a></li></ul>16/05/2023: Added Assembly manual to support assembly._________________________________________________________________________________________________________I was using a generic food dehydrator as a filament dryer (Muhler DHY-500T). It was not very handy to use to dry filament because the spool sits its side, and was weird to put it in and out and I could only dry one spool at a time, which was not very energy efficient. So I took out the electronics from the dehydrator and designed a box from scratch.&nbsp;This is a fully functional 2 spool food dehydrator with a 250W motor (in my case it's 250W, but there are food dehydrators ranging from 150W to 450W). As expected, please use PETG or above (ABS, ASA, etc) to print all the parts since the temperatures should be above 50degC. For the feet you can print in PLA, but I advise in TPU for a nicer feeling. I also included in the rear a nice power cord lock, so even if you pull it up strong it won't rip anything. The lid on the top opens with two hinges in the back, for this M4 Screw and Heated brass inserts is needed, but if you don't have brass inserts you should be fine just with a long M4 bolt and a M4 nut.&nbsp;I included the STEP file in case the electronics of your food dehydrator doesn't fit on those holes you can easily modify it to fit your electronics.&nbsp;This filament dryer is compatible with filament spools as big as 21.5cm (exterior diameter) & 8.5cm (thickness)! So should be compatible with any filament spool available. There's also plenty of space to put some silica bags to keep the humidity down.&nbsp;BOM: Mandatory:<ul><li>Food dehydrator (should be quite generic) - You can buy these used from 5$ to 15$ max</li><li>4x Bearings 608 (608 / 608rs / 608zz, etc…)</li><li>Round Cheap Hygrometer - 2$ for a pair (Search AliExpress “Mini hygrometer”)</li><li>2x Heated Brass Insert M4 (any lenght) and 2x M4 bolts (any lenght above 10mm) OR 2x M4x25mm bolts + 2x M4 nuts - For the hinges</li><li>2x PTFE Tube (to feed filament out of the dryer)</li><li>2x zip ties (to lock the PTFE tube)</li><li>Self tapping screws to lock the electronics in place, to lock the power cord.</li></ul>Optional:<ul><li>5mm heating insulation pad to cover the whole inside walls and increase the heating capabilities and efficiency.</li></ul>If you enjoy it, consider tipping (any amount, even 0.05$ is appreciated) to my Paypal (affp_93@hotmail.com) to keep funding more nice projects like this. Even if you don't feel like donating, putting a like and dropping a appreciation comment goes a long way to support it!

film

deco

printer accessories

calibration

useful stuff

tools