Peter Broeders

idnarbjm

As you can see in my picture, where my A1 Mini sits the Bambulab A1 Mini Headshot / Poopshoot hangs over the edge of a bench.  I found I printed many parts that filled the original basket, so I modeled the OG and made it 82mm deep instead of 36mm.  This works for me, but it won&#39;t if you don&#39;t hang over the edge.&nbsp;I included the fusion file in case you want to make design changes. &nbsp;Thank you @halil_d for a great model to base my modification on.https://makerworld.com/en/@halil_d

Poop Shoot Box

A1 mini

CTeipen

I liked the handle models for the Ikea Alex. I printed one not fitting at all. This one fits on my IKEA Alex, which are from 2018-ish. The fit is tight enough so i won't need any screws nor tape. But feel free to make them more fixed on your.This remix uses a mashup of the original models named here. Some got rough edges, some were pretty thick. So i optimized them :)

IKEA ALEX Handle - less material - tight fit

Ikea

TwinexX

Batterie Cover für den Controller von der Xbox one S.&nbsp;Drucker Profil:&nbsp;Schichthöhe; 0.2 mm&nbsp;Nahtposition ; Ausgerichtet&nbsp;Wandlinien; 6&nbsp;Füllung; 20 Prozent&nbsp;Geschwindigkeit; Standard&nbsp;Stützen; Normal (Manuel gesezt)

Xbox One Battery Cover

Gaming

K2_Kevin

This Hex Tray offers thicker walls for a more rugged tray. 2x2x9 Gridfinity base plate.

Hex Bin Gridfinity 2x2x9

Gridfinity

GameFanatiquinho

Spoiler RC car 

Suzuki

sgastel

Nothing I found fit my body so I just created my own. I plan to purchase another body in a few weeks so may need to create a new one. The holes are built into the model for mounting hardware of your choice. I used rivets and they are holding on great. The debris you see in the pictures are from the test run and she did flip a few times and they held up great. Hopefully this helps someone besides me….!! ha&nbsp;Print with a Brim to make sure the model sticks and if your printer is in a cold environment like my garage then turn your fans down to 50% which should help it to stick.

Traxxas Slash Rear Skid Plate

Traxxas

Efeitos3d

I need to put my lego xwing on the vertical axis so i made this support. enjoy

Stand for star wars lego x wing

Lego

Gadgetgarry

jig fir two aluminium business card engraving

jig business card

Laser

3DPODesigns

UPDATE: Per requests in the comments, I've added a way to add weight to the Hex Paper Towel holder if you find it necessary. You do NOT need to reprint the paper towel holder itself. Simply print the “Hex Paper Towel Holder Plug” profile, fill the hollow portion of the paper towel base with sand/dirt/or weighted material of your choice and press fit the plug into the hollow hole in the base(I was able to add 150 grams of sand to mine). Make sure you leave enough room to push the plug down far enough to sit flat. I've included a small grip on the plug for ease of guidance, as well as removal with pliers if you ever feel the need. From my testing it does not need glue, but if you want it 100% permanent, please add a dab to the sides of the plug before inserting. Pictured below is the plug assembly,<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381832/2023-12-16_d456b79522b16.png"></figure><ul><li>This is a beautiful, functional, low filament using paper towel holder I designed for my own home. Using hexagons I've made this paper towel holder both strong and light using only 135 grams of filament and NO supports!</li></ul>&nbsp;<ul><li>Specifically sized to be printable on the A1 Mini!</li></ul>&nbsp;<ul><li>Keep in mind this model is again, light, so you may need to hold it while removing a paper towel. However, I found with even my own metal holder at home I still had to do that 90% of the time, so the filament savings seemed like a worthy trade off.</li></ul>&nbsp;<ul><li>This paper towel holder should fit most small to large rolls (though I've only tested a few I have access to)</li></ul>&nbsp;<ul><li>I've included both Default Speeds and Normal profiles as my testing with PLA at Default Speed settings was great, but if you want to print in PETG it can have flow issues, so just make sure your flow rates are tuned if using the fast profile. I strongly urge you to use the normal profile if you are unsure of your flow rates. I do not have a tuned profile for A1 mini, but I've included a fast profile that should work fine as long as your flow rates are tuned. Please let me know if you have any issues with it (I printed both the fast and normal profiles a total of 5 times each, but your experience matters!) and feel free to upload your own A1 profiles!</li></ul>&nbsp;<ul><li>If you enjoy this model please toss it a like!</li></ul>&nbsp;&nbsp;

Hex Paper Towel Holder

House/Garden/Kitchen

thrutheframe

<h3>NOTE:</h3><ul><li>Please read the instruction guide below. </li><li>download the 3mf file if you are using a Bambu printer.</li><li>I do my best to double-check and test the print profiles I created. Therefore, I will only take feedback and update for those profiles. I cannot vouch for profiles uploaded by others, so please do due diligence.</li></ul>&nbsp;This is the second of three designs by Thrutheframe for the A1 mini. These 3 essential printable accessories that you will need for your new printer. <ol><li><a target="_blank" href="https://makerworld.com/en/models/15603#profileId-15023" rel="nofollow noopener">A1 mini Poop Management System</a></li><li>A1 mini Build Plate Stand</li><li><a target="_blank" href="https://makerworld.com/de/models/28319#profileId-24702" rel="nofollow noopener">A1 mini Scraper and Stylus Holder</a></li></ol>&nbsp;While the hardware for all 3 builds can be self-sourced, I am working with <a target="_blank" href="https://veetec3d.etsy.com/listing/1583763119/a1-mini-accessories-hardware-kit" rel="nofollow noopener">Veetec3D to offer an A1 mini Hardware Kit</a> for all the 3 builds above. It will include the 6x3mm magnets, M3 screws, VHB, thin double-sided tapes, and pre-cut self-adhesive anti-slip pads. Printed parts are not included. &nbsp;The price is 10€ with tracked shipping at 5€, making the total cost at 15€. We try our best to keep the pricing affordable for everyone to have easy access to the required hardware for all 3 builds. In addition, parts and labor are sourced within EU. If you like the designs by ThrutheFrame and wish to support his projects, do consider buying this kit. The royalty will go towards funding project consumables ie. filaments, materials, electricity, coffee, time, and my brain cells. &nbsp;&nbsp;<figure class="image image_resized" style="width:90%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108153/2023-09-29_283d6ee9969e9.jpg"></figure>&nbsp;<h3>INTRODUCTION</h3>There are 2 types of build plates available for the A1 mini; PEI textured and PEI matte. Most people order extra plates just in case. Hence I designed this build plate holder/stand to organise up to 4 build plates for your A1 mini. &nbsp;As the A1 mini may be the user's first 3D printer, I set up a few parameters when designing the stand:<ul><li>Aesthetically pleasing, Easy to print/assemble and Fun to use. </li><li>Optimize print time and filament usage</li><li>Must fit onto the A1 build plate of 180x180x180mm</li><li>Stable and sturdy</li><li>Minimal or no support needed</li><li>Printed in PLA, PLA+ or PLA pro</li></ul>&nbsp;There are 3 printed components. A1 is the main spline and B1s are the side support. 4 pcs of M3x8mm BHCS are required to secure both B1 to A1. Optional rubber or EVA foam can be used to improve grip on the table. &nbsp;There are 3 versions of B1:<ol><li>Plain no logo</li><li>Numbered 1 to 4</li><li>with the Bambu Lab logo</li></ol><figure class="image image_resized" style="width:50.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108153/2023-09-28_7a277fd9b0435.png"></figure>&nbsp;<h3>BOM</h3><ol><li>M3x8mm Button Head Cap Screw (BHCS) - 4pcs</li><li>Rubber or EVA pads - 2pcs (optional)</li></ol>&nbsp;<h3>INSTRUCTIONS</h3>Download the 3mf file. The settings are prepared for printing PLA on an A1 mini. If you are printing on a different printer, please make the necessary changes to the settings. I have designed the parts based on 0.4mm nozzle and 0.2mm layer height. Print in 0.2mm layer height for accuracy. <figure class="image image_resized" style="width:50.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108153/2023-09-28_b2958dc71a473.png"></figure>Build Plate 01 - A1A1 is the main spline and is required to print it. Note that it is printed at an angle on the 180x180mm build-plate and will need at least 4 top shell layers with the infill direction is 90 degrees. I have prepared the setting in Bambu Slicer. You will only need to change it if you are using the stl on a different slicer. &nbsp;Build Plate 02 - B1 plain, No logoYou will need to print 2 pcs of this part. I have prepared the setting in Bambu Slicer. You will only need to change it if you are using the stl on a different slicer. &nbsp;(Optional) Build Plate 03 - B1 with number and BL logoOptional if you want a side support with some design. there are 2 designs. &nbsp;(Optional) Build Plate 04 - B1 BL logo coloured Optional if you want a dual color side support with Bambu Lab logo&nbsp;<h3>INSTALLATION</h3><ul><li>A1 and B1 are connected with a pair of dove tails slots.</li><li>Slide B1 into A1 and secure it with 2 M3x8 BHCS. Note that the screw holes are self-tap, please do not over-tighten them or it can cause stripping. </li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108153/2023-09-28_375ecb5d15b94.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108153/2023-09-28_f06570799b018.png"></figure>&nbsp;<ul><li>(Optional) Paste the rubber / eva foam to the base of the stand. </li><li>The DXF and SVG of the foam can be found in the zip file available for download. </li><li>You can also manually cut them. (Dimension 52x50mm)</li></ul><figure class="image image_resized" style="width:49.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108153/2023-09-28_414d51bc4911a.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108153/2023-09-28_d7202379227e1.png"></figure>&nbsp;To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like my designs and wish to contribute to my coffee addiction & help fund the filaments and materials needed for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated. &nbsp;&nbsp;<h3>Caveat</h3>As with all my designs, Prototyping and testing were conducted to ensure printability and meet my own expectations. However, I understand it may and may not work for you. I would request that you read all instructions and print and install them at your own discretion.

A1 Mini Build Plate Stable Stand Holder with Plain, Numbered and Multi-Color Bambu Lab Logo

To Print

BEAMink

NEW V2 @https://makerworld.com/en/models/70149#profileId-74470&nbsp;This is a version of a deburring tool I made. Fits standard deburring bits.You can get the bits at this link.&nbsp;<a target="_blank" href="https://a.co/d/eMfLUbm" rel="nofollow noopener">https://a.co/d/eMfLUbm</a>&nbsp;The Male threads are a little hard to get started. You may need to cut the start of the thread as it gets closed up when printing.&nbsp;&nbsp;

3D Printing Deburring Tool

Tools

Infuse3D

After my son continually crashed my Tamiya Lunchbox RC Car which broke the servo saver, I made this version, a piece of the P-Parts. 0.2 layer height, 100% infill - print in PETG as PLA tends to snap to easily.

Tamiya Lunchbox Servo Saver

Tamiya

vier2acht

The clips will propably break (even the OG clips broke) tried my best to make them more stable. in my case it fits perfect and is prettey reliable.<ul><li>PETG/ABS/ASA</li><li>Print it on the long side standing up, Clips are stronger like this</li><li>Infill 100%</li><li>Supports are important</li></ul>I used this Thermometer:47mm x 26mm<a target="_blank" href="https://www.amazon.de/dp/B07HNXH8MT?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B07HNXH8MT?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>