Peries72

BamBam Design

<h4>Toroidal Windmill - Self adjusting turbine</h4>Looks like a spinning flower and no much wind is needed.<a target="_blank" href="https://youtube.com/shorts/WrKHW2Cdyvk?si=byQ_EpJAfOOy8x7F" rel="nofollow noopener">YouTube Short</a>&nbsp;<ul><li>Beautiful Windmill with toroidal Propeller Blades</li><li>Self adjusting to wind direction (Tail Blade Reworked)</li><li>100% printed, no Screws or tools needed</li><li>You can add 3 Propellers on one Axle with 2 distances</li><li>Full customizable with different propeller sizes and directions (I plan to add more cool propeller types as well)</li><li>Rods are stack able to your needed height</li></ul><h4>Printing:</h4>You can choose Propellers from 3 Print Profiles<ul><li>Basic Parts with Left&amp; Right Propeller to choose</li><li>Additional Propeller Blades</li><li>Additional Slower Propeller *New</li></ul>You can mix the propellers from these profiles.<ul><li>added one profile for A1mini without the biggest blade as well</li></ul>The rod could be a bit difficult to print, i added custom support, but clean your buildplate and apply some glue.&nbsp;PETG &amp; PLA tested👍🏼<h4>Assembly:</h4><h4>Info:</h4><ul><li>Added custom support to the horizontal printing rod</li><li>Added optional longer axle for more distance between propellers (10mm instead of 5mm).  With stronger wind the bigger blades should not collide.</li></ul>The Pitch from the Basic Blades:<ul><li>Big - Pitch 195mm</li><li>Med - Pitch 170mm</li><li>Small - Pitch 135mm</li></ul>Additional Propeller Blades with different numbers of Wings:<ul><li>Big - Pitch 190mm</li><li>Med - Pitch 160mm</li><li>Small - Pitch 130mm</li></ul>Additional “Slower” Propeller Blades:<ul><li>Big - Pitch 400mm</li><li>Med - Pitch 325mm</li><li>Small - Pitch 250mm</li></ul>Thanks to all followers and don&#39;t forget the virtual handshake 👍 ….Happy Printing&nbsp;Info II:My other windmills are fully compatible if you want to mix it up:<ul><li><a target="_blank" href="https://makerworld.com/models/235261" rel="nofollow noopener">Toroidal Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/388124" rel="nofollow noopener">Elliptical Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/425419" rel="nofollow noopener">Sunflower Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener">CLAMP for Windmills</a></li></ul>Info III:More modifications you find on my Patreon account.<figure class="image"><a href="https://www.patreon.com/posts/mod-608-bearing-105175595" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000235261/design/2024-05-30_3ad9786c3df1b.png"></a></figure>&nbsp;<figure class="image"><a href="https://www.patreon.com/posts/mod-pole-adapter-103628897" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000235261/design/2024-05-30_70c92ad1f54a9.png"></a></figure>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Toroidal Windmill - Customizable system

à imprimer 

qwiktune

<a target="_blank" href="https://www.thingiverse.com/thing:5323208" rel="nofollow noopener">GarabatoenZ</a> Classic spartan sd card holder. I optimized some tree supports by removing support where it wasn't absolutely necessary.

Spartan SD Card Holder

utiles

brentglover1970

Chunky Chief - with free included support removal game :)Master Chief from HALO game but chunkier!&nbsp;I printed this large! but can easily be scaled down for a more time friendly print.I will probably be adding a coloured profile soon to this but it will be a long print!&nbsp;&nbsp;&nbsp;Based on Spartan Armour MKV Free downloadand “<a target="_blank" href="https://skfb.ly/6WqGM" rel="nofollow noopener">Roblox Halo set v2</a>”by nermin is licensed under Creative Commons Attribution&nbsp;&nbsp;&nbsp;&nbsp;

Chunky chief - Halo spartan

figurines

BenGlut

Print Profil : No Support No Brim No Raft Layer 0.2mm / 0.24mm English: Rosa3D Master Spool Safety Clamp by Atome3D Introducing the Rosa3D master spool safety clamp, an innovative and sturdy solution to secure your filament spools. Expertly designed by Atome3D, this screw-lock mechanism is 3D-printed for strength and ease of use. Made from high-quality plastic, the clamp comes in a bright blue color for easy identification. It is tailored to fit Rosa3D master spools perfectly, ensuring a secure hold and repeated use. Choose an eco-friendly option with this reusable clamp, thereby reducing plastic waste. Compatible, convenient, and designed with the user's comfort in mind, this clamp is an essential accessory for all your 3D printing needs. French:Bride de Sécurité pour Master Spool Bobine Rosa3D, conçue par Atome3D.com Découvrez la bride de sécurité pour bobine maître de la marque Rosa3D, une solution innovante et durable pour sécuriser vos bobines de filament. Conçu avec expertise par Atome3D, ce mécanisme de verrouillage de type vis est fabriqué par impression 3D et promet facilité d'installation et robustesse. Réalisée en plastique de haute qualité, cette bride arbore une couleur bleu vif pour une identification aisée. Elle est spécialement adaptée aux bobines maître Rosa3D, garantissant un maintien parfait et une utilisation répétée. Optez pour une approche écoresponsable avec cette bride réutilisable, réduisant ainsi les déchets plastiques. Compatible, pratique, et conçu pour le confort de l'utilisateur, c'est l'accessoire indispensable pour tous vos besoins d'impression 3D.

Rosa3D Safety Clamp (Bride) for MasterSpool by Atome3D

masterspool 

Waikikiprod

<h2>A Valentine&#39;s Day gift with an ingenious locking system !</h2><h2>Simply twist the knot to lock or unlock the present !</h2>No need screws.<h2><a target="_blank" href="https://www.instagram.com/reel/C0R34OFrZxP/?utm_source=ig_web_copy_link&amp;igshid=N2ViNmM2MDRjNw==" rel="nofollow noopener">Video of assembly Here</a></h2>&nbsp;This gift is derived from my <a target="_blank" href="https://makerworld.com/en/models/78331" rel="nofollow noopener">lockable Christmas gift</a> which you greatly appreciated ! :)Other versions will arrive in the coming days on this page ;)<h2><a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener">Follow me </a>to discover its next Variations ;)</h2><figure class="table" style="width:96.81%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td>Version of box</td><td>characteristic</td><td>STL and 3mf for box and lid</td></tr><tr><td><figure class="image image_resized" style="width:86.61%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168156/design/2024-02-02_70569d855be25.jpg"></figure>Lockable Heart Box With Ribbon</td><td><ul><li>No need AMS</li><li>Easy print</li><li>Need Supports for box and lid</li><li>Need Glue</li><li>Print Ribbons on the side</li></ul>&nbsp;</td><td><ul><li>Lockable Heart Box With Ribbon.3mf</li></ul>&nbsp;<ul><li>Box for Ribbon.stl</li><li>Lid for Ribbon.stl</li><li>Ribbon for box.stl</li><li>Ribbon for Lid.stl</li></ul></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168156/design/2024-02-11_34dc9518bb32d8.png"></figure></td><td><a target="_blank" href="https://www.printables.com/fr/model/748353-lockable-heart-box-valentines-day-commercial-licen" rel="nofollow noopener">Only for Printables Club Member</a></td><td> </td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168156/design/2024-02-11_d4060ac53e56d.png"></figure></td><td><ul><li><a target="_blank" href="https://www.printables.com/fr/model/748353-lockable-heart-box-valentines-day-commercial-licen" rel="nofollow noopener">Only for Printables Club Member (For commercial Use)</a></li></ul>or&nbsp;<ul><li><a target="_blank" href="https://cults3d.com/fr/mod%C3%A8le-3d/divers/lockable-heart-box-with-motif-the-official-mechanism-by-waikikiprod" rel="nofollow noopener">Buy for 1,25€ on Cults (for Non commercial Use)</a></li><li>Promo of -50% until March 12, 2024 (€0.63)</li></ul></td><td> </td></tr></tbody></table></figure><h3>All versions use the same mechanism and node</h3><figure class="table" style="width:95.25%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td>Version of box</td><td>characteristic</td><td>STL</td></tr><tr><td><figure class="image image_resized" style="width:82.52%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168156/design/2024-02-02_942720055ce1e.jpg"></figure></td><td><ul><li>Easy print</li><li>No need AMS</li><li>No need Glue</li><li>No need supports</li></ul></td><td><ul><li>3mf included in all versions</li></ul>&nbsp;<ul><li>node HeartBox.stl</li><li>Node adjustPlus02</li><li>node half Heart box.stl X2</li><li>Node HeartBox Ribbon.stl</li><li>LockDiscCoeur.stl</li><li>Pin</li><li>Lock Pen S.stl</li><li>Lock Pen L.stl X2</li></ul></td></tr></tbody></table></figure><figure class="table"><table><tbody><tr><td>&nbsp;<a target="_blank" href="https://www.printables.com/@Waikikiprod#join:367" rel="nofollow noopener">Subscribe to my club for 3$/month to be authorized to sell my physical 3D printed objects as long as you are subscribed</a></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168156/design/1b7d82e5-1785-41cc-9f2a-0a31c3e6cf77.png"></figure></td></tr></tbody></table></figure><h3>Support my work with <a target="_blank" href="https://bambulab.com/fr-fr?sscid=51k8_1qigt" rel="nofollow noopener">my Bambu Lab affiliate link</a></h3><h3>Thanks to you and your downloads, this 3D model is free! Thank you so much !!! &lt;3</h3>Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons</a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:61.12%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168156/design/2024-01-21_6a0b5851372128.gif"></figure><a target="_blank" href="https://makerworld.com/en/models/78331#profileId-82574" rel="nofollow noopener">Lockable present - ingenious mechanism</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168156/design/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168156/design/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168156/design/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168156/design/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168156/design/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure>

Lockable Heart Box - The official Mechanism

coeur 

cuncg

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-06-13_2a3ab3f4480948.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-01-22_4d9d26956d108.gif"></figure><h3>Tip: Please use the optimized version for printing to get better printing results</h3>The Year of the Dragon has specially designed a cute lucky dragon, symbolizing attracting wealth and treasures. The model production was completed in Cinema 4D, and the output model has very high accuracy, which can print larger sizes. In my printing, it is a small size, and I can also see enough details. It can print single colors or multiple colors. I use K&#39;s orange metal consumables to print the effect very well. There are several explanations as follows:<ol><li>There are two versions of the model uploaded, mainly with two designs: the body with scales and the body without scales.</li><li>There are no special settings for printing parameters, and printing can be done using preset settings. Experts can test for more ideal printing accuracy on their own.</li><li>This version of the design requires the support to be turned on for printing, and the support is also easy to remove. It is recommended to use support consumables to print the support surface, which is easier to remove</li><li>There are no requirements for consumables, and personally, I think Kexcelled&#39;s metal consumables have very ideal effects</li></ol>Update: My design has been commercialized as an electric waver<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-06-20_bdcc9eab0668f8.gif"></figure><h2>2024.6.20更新：请使用优化版本打印配置进行打印，它具有更少支撑更容易打印的优势</h2>龙年专门设计了一个可爱的招财龙，寓意招财进宝。模型制作在Cinema 4d中完成，输出的模型精度非常高，可以打印更大尺寸，在我的打印中为小尺寸，也能看到足够的细节，可以打印单色也可以打印多色，我使用k家的橙色金属耗材打印效果很理想。有以下几点说明：<ol><li>模型上传有两个版本，主要是身体有鳞片和无鳞片两个设计。</li><li>打印参数没有什么特殊设置，使用预设便可打印，高手可以自己测试更理想的打印精度。</li><li>该版本设计需要开启支撑进行打印，支持也便于拆除，建议使用支撑耗材来打印支撑面，这样更容易拆除</li><li>对耗材没任何要求，个人觉得k家的金属耗材效果非常理想。</li><li>模型已分开零件，可以自己实现多色打印</li></ol>制作过程分享：<figure class="media"><oembed url="https://www.bilibili.com/video/BV1jT4y1b7E9/?vd_source=0d3d7161a6587b2f3e211c44ce51f5ca"></oembed></figure>在接下来的版本将会做一个可电动摇手的设计，同时优化造型，实现无支撑打印。<blockquote>重大更新：</blockquote>电动摇手版招财龙已经成功产品化，效果如下视频展示：<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-06-20_bdcc9eab0668f8.gif"></figure><figure class="media"><oembed url="https://www.bilibili.com/video/BV1sE421N75z/?vd_source=0d3d7161a6587b2f3e211c44ce51f5ca"></oembed></figure>&nbsp;&nbsp;&nbsp;

Lucky Dragon/中国招财龙

dragon

SavageLau

<h3>If you want a commercial license, check out my bio and get it from Patreon.</h3>&nbsp;I don't how this relate to Valentine's day. But I think it would be fun to gives her/him a Thumbs up and appreciate for everything. IDK maybe it's a dumb idea/design? MakerWorld Valentine's Day contest. (3/5)&nbsp;&nbsp;This design inline with my other Saber design. Takes around 46g to print and 2h6m (from X1C default profile). Two color version takes around 4h to print.You see Gesture 01 on the name, so there will be gesture 02, 03, and more. Most of the design was done, but waitting for test print verify and possible revisions.&nbsp;&nbsp;&nbsp;<h3>You may also like other Saber design:</h3>Rose Saber<a target="_blank" href="https://makerworld.com/en/models/151564#profileId-165458" rel="nofollow noopener">https://makerworld.com/en/models/151564#profileId-165458</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/453540/2024-01-25_d94b529e334c1.jpg"></figure><h2> </h2><h2>Post work instruction:</h2>Remove connecting 4 connecting rods, and remove brim.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/453540/2024-01-25_7b9c5965288a3.gif"></figure>&nbsp;Connect rods was added due to the top part is a bit hard to print and very easy to fail. This design change sinificantly improve the printing success rate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/453540/2024-01-25_9a63baff102f7.png"></figure>&nbsp;<h2>Design:</h2>It is very similar to the rose saber design, similar interlocking mechanism, but I have tried a lot of small number tweaks to improve the mechanism.<figure class="image image_resized" style="width:21.42%;"><img src="https://makerworld.bblmw.com/makerworld/draft/453540/2024-01-25_0877d0ce26a3.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/453540/2024-01-25_3c38fc0afd2c1.png"></figure>&nbsp;Hand was sculpture according to the proportion and gesture style of my hand. But made a lot of changes to make it easier to print.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/453540/2024-01-25_80826da644492.png"></figure>&nbsp;Some design issues on older versions.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/453540/2024-01-25_240504288e461.png"></figure>&nbsp;Anyways, I think it would be a little fun toy.&nbsp;<h2>Printing suggestions:</h2>This is generally a simple print, even with tight tolerance and tall parts. But I have focused on printablility from the design stage.Brim is necessary. I suggest increasing brim to 15 to 20mm and with 0 gap. Might a bit hard to do the post work but better than fail.Also suggest using Gyroid infill. Or you can simply use my printing profiles.

à imprimer

utiles

figurines

masterspool

coeur

dragon

doigts