PenolopyBulnick

The design for these earrings was generated using Craiyon.com and then further edits were done in Photoshop to get the look I wanted for when I ran it through HueForge. &nbsp;Works well with a variety of color combinations. All designs were done with 5 colors. &nbsp;Hole for jump ring was added in the BambuSlicer so the raw STL file does not have it and you need to add it yourself. The Print Profile does have the holes necessary for hanging. &nbsp;Color Changes: Layers 1 - 4 : Navy Blue Polymaker PolyTerraLayers 5 - 11 : Inland Egyptian BlueLayers 12 - 18 : Peacock Blue (Hatchbox)Layers 19 - 22 : Light Blue (Inland)Layers 23 - Top : White<ul><li>.08mm Extra Fine settings were used with .4 Nozzle.</li><li>Ironing on all top layers.</li><li>Gyroid infill is used where it is necessary but 100% infill could also be good with how small and thin it is.</li><li>I use a Prime Tower, but it is small. Possibly not necessary but helps sometimes.</li><li>5 colors</li></ul>

Rose Sketch Earrings

My HueForge

HueForge

BamBam Design

<ul><li>A like or follow costs nothing, just like the 3D model! Thank you 🤗</li></ul>UNICORNA Horn from a Unicorn with a Slot for elastic Bands, Hair or Head Bands.Use it as a cool Party costume.Maybe for New Year's Eve or Carneval? Share your Pictures 😃🎉&nbsp;You can light up the horn very easy. Instructions follow…&nbsp;It prints beautiful in vase mode with 16 bottom layers!&nbsp;For assembly simple slide both band ends in the slots. I used 16mm band and stapel the end seperatly. It holds very well!&nbsp;Happy Printing!🎊&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Unicorn Horn for Elastic Hair/Head Band

DavidsGotWood

<figure class="table" style="width:100%;"><table style="background-color:#F1FAE7;border-style:solid;"><tbody><tr><td style="border-color:#16C344;border-style:solid;">This model still works great, but I there is an <a target="_blank" href="https://makerworld.com/en/models/150357#profileId-164033" rel="nofollow noopener">improved model</a> that's quicker to print and is more compatible with the AMS Lite.</td></tr></tbody></table></figure><h3>About</h3>A ground-up rebuild of the excellent Polymaker spool adapter with the following changes:<ul><li>Edge clips removed (These tend to damage spools and are also not needed since the adapter uses the locator pin to lock into place)</li><li>The Center design has been updated for a more generic spool look (More visually compatible with both Polymaker and Overture brands)</li><li>The fitting has been slightly adjusted to allow easier swapping between spools without compromising its hold on the spool (less likely to break when being removed)</li></ul><h3>Printing</h3>Prints well in PLA and PETG. PETG is less brittle and has better layer adhesion, which is beneficial with the very thin edges (to help avoid layer splitting).<h3>Remixing</h3>This model can be remixed using the provided Onshape link or via your own tools using the provided Step file. <a target="_blank" href="https://cad.onshape.com/documents/dbaebacda5b3cb0106ef3785/v/3bd545f2309a6f1639bc2dfa/e/b3a36ea65d7d2dbba3dd98f7?renderMode=0&uiState=65ac3d935b651058e8f0c7cd" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/444098/2024-01-20_862d67e6026cc.png"></a><figure class="table" style="float:left;"><table style="background-color:rgba(64, 200, 232, 0.094);border:1px solid rgb(64, 200, 232);"><tbody><tr><td style="border:1px solid rgb(64, 200, 232);padding:0.4em;">Note for Open Sourcing 3D Printed models:If providing 3D models under an Open licence, please be genuinely #OpenSource, release your source files with your STLs and make it easier for others to collaborate.</td></tr></tbody></table></figure>

Polymaker / PolyTerra / Overture Cardboard Spool Adapter

dedan83

Since we always had the problem that our cats wanted to play with the christmas balls and then they broke, I decided to print some myself.I printed them without infill and 0.12mm layer height. At the beginning of the sphere and at the top I set the layer height to 0.08mm so that the layers are not so visible. I printed them with the top side on the printing plate. The small hook can simply be pushed into the top of the ball, which then snaps into place but can be removed again if desired.

Christmas Bulb with tree ornament

Christmas

IK3Digital

Adorable Chubby T-rex pencil holder that prints super easy and quick as it needs no supports at all.&nbsp;I recommend at least 2 walls and 12% infill.&nbsp;All of my models are for personal use but if you would like to sell them physically you can subscribe to my Patreon to get a commercial license, free models every month and a welcome package: https://www.patreon.com/IK3D &nbsp;&nbsp;

My HueForge

HueForge

Kid

AMS

Christmas

print later