PennyD

This is a remix of a multiboard 3x4 bin plate, I needed lots of draws for my bits and pieces so designed this for my needs, its very strong and fits straight on to the multiboard,supports are needed on the main draw unit just around the edge, they are also needed on the draws, the handle and draw rebatesJust added a new version of the draw chest, this one doesn't need supports as it has a flat bottom, ive just taken the multiboard box but away from underneath but will still attach the same way and will save a bit of filament&nbsp;Multiboard is a great system you must check it out !

Draw set for Multiboard, remix from a 3x4 bin

multiboard

Kawesky

Just a fun little hanging rack for false eyelashes, the ultimate lash organization solution! Say goodbye to the daily falsie hunt with this stylish space-saver. Perfect for keeping your lashes in top condition and saving you from finding them stuck to everything inside your make-up bag! Print two of the feet to assemble.

False Eyelash Hanger Rack

makeup

HG_Design

Bambu Boeing 737Prepared to be able to print on a single table, preferably with ams.This was designed to be assembled and glued.I made the STL of the fully assembled model available if you want to make a support stand. If you have any problems or suggestions for improvements to this project, please leave them in the comments.In the photos you can find the corresponding mounting location for each specific STL.Thanks

Bambu Boeing 737

planes

Cjwelcome

This mechanical Pill organizer box can help store even some of your larger pills for a convenient and labeled AM-PM cycle. This design uses absolutely no supports whatsoever in order to provide you the most user friendly experience in printing with ease. Simply print the components and throw them together for a super cool lever action dispenser with a satisfying click to its internal ratcheting mechanism! No need to remove components or disassemble this box for refills, simply open the lid and replenish your next weeks dosages. Stands upright for easy storage in your cupboard or bathroom medicine cabinet. Continue reading below for any updates and Enjoy!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-05_32261aba83369.gif"></figure>EDIT 1: Added a pill fit tester so you can see if your amount of pills fit in the very quick spiral vase print then that is how much volume each section has available. Many people cant quite guage how much room each section has so this seems like it will help everyone out if they arent sure and dont want to waste time printing the whole thing. Happy Printing!&nbsp;EDIT 2:•Added V2 box which fixes empty spaces inside the box which could potentially jam smaller pills inside when using.•Added multiple language labeled drums! English, Spanish, Polish, German, French  and now Romanian! If there&#39;s a language you&#39;d love to see included then drop me a DM!&nbsp;EDIT 3:•Some people seem to have some fitment issues with the inner rotating drum. For this I&#39;m sorry and looking at my model that specific part has ~0.15mm Radial tolerance (Tol.= 114.3mm - 114mm / 2 = 0.15mm Radial Tol.) which for some printers can become too tight. For this I recommend printing everything else the same but for the center drum, print it at 99.5% scale should put the drum around 113.5mm, adding another 0.25mm radial tolerance if your printer seems to print too tight which should solve that issue of fitment.•Second is more of a simple sizing request for some. For everyone who loves the design but thinks its a little on the small side for the amount or size of pills they need to take, I have found a solution in the very easy form of scaling the model! For every component except the center drum, you will want to scale up from 100% to 120%. The main case will need to be rotated 45° then upscaled and all others small components can just be upscaled to 120% as they currently sit. The center drum in order to keep it from being too tight, scale it up only to 119.75%. That should be able to then hold up to six (27mm L x 10mmØ pills) in every section and still be under 6&#34; tall. If you upscale it to 120% and the mechanism doesnt seem to be clicking the drum into place that is because the tolerance of the ratchet wheel under the drum will now have a little slack in it. To solve this, place a small piece of electrical tape or scotch tape on one or two faces of the sqaure peg on the base until the ratchet sprocket has no wiggle room shown below.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-07_e78b9474b42e.jpg">&nbsp;EDIT 4: Some people gave feedback that their prints were too tight of tolerance and the center drum would not be able to spin or the main hinge was binded and would snap at the base when trying to break it free. Another issue of individuals that need to take smaller pills or chalk like pills would have them break and or become caught in the lever arm above the opening section. To solve these issues I have opened up the tolerance for both the drum section and beefed up the hinge of the main box as well as added a fin section that covers the lever arm allowing the pill section to be fully covered allowing no space for pills to get caught between. The only difference is with the assembly which will require a small drop of superglue at the three pin locations for the two alignment slots and the central lever pin cavities. Because few of these instances have occured, the V2 will remain available for people to download and print but if you are interested in a bulkier hinge, looser toleranced and no risk at all of pills getting caught at the open ended section then V3 is for you. Im always open to feedback and Italian labeled drum is soon to come for this edit #4!&nbsp;&nbsp;ASSEMBLY INSTRUCTIONS: Be sure your parts are free and clear of wispy strings and your machine/filament is properly calibrated for accurate printing. These models are meant to assembly together with relative ease and tolerances but improper printing/old filament can cause tolerances to seem tight. Make sure the notch mark on the Drum-Lock ring is facing the front pill opening of the box or else the ratcheting mechanism will not line up properly.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-05_43efbd423805d.gif"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-05_9a1e8430cd059.jpg">(V2 Assembly):May or may not have some tight fit issues on case by case basis and potential for pill to get grabbed by the lever arm.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-05_63d37f8c0c547.gif">(V3 Assembly)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-11_042dd9cb10122.gif"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-11_91df90be1061.png">&nbsp;!CAUTION!…Be sure to keep away from children as we all must remember that these are still for pill/medication storage and must be treated as such regardless of how cool 3D printing their storage is. Be safe and happy printing!&nbsp;

Mechanical Weekly Pill Organizer(NEW MULTILINGUAL)

pillboxes

R3Dmaker

A simple baking Ingredients organizer which allows to organize these tiny yeast, baking soda, vanilla sugar, etc. bags at the cabinet door / drawer. I used 3M VHB Tape to stick it to the door. This works perfect.

Baking Ingredients organizer

kitchen

3D Print Masters Hub

Space Saver Desktop Organizer-keep your printer accessories in one place 👍🏻-Great for organizing miscellaneous tools, pens, pencils, markers, paperclips and more!-Easy print-Scale down as needed.-Two versions, one with Logo on front and one with logo on side.-Please like and subscribe! More to come!-See bio for more exclusive print project ideas.🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥

Spacesaver Vertical Desktop Organizer

desk

hollowmaker

Perfect for fast wall-building.Printed with PolyTerra PLA (for the matte effect)For the best result print it upright and not on the flat buildplate!no supports needed!&nbsp;Also check out my other Lego compatible designs I have made:<a target="_blank" href="https://makerworld.com/de/u/1369155071" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/278754/2023-12-11_e6b9636f0de89.jpeg"></a>

Lego compatible castle wall

lego

Benjamin Kott

Picture Frame to mimic the look of Polaroid i-Type. Modular mounting with modules for 6x2 magnets and an included stand. Dimensions Frame: 88x107 mm / 3.5x4.2 inch Dimensions Photo Area: 79x79 mm / 3.1x3.1 inch - Easy to print - Easy to assemble

Instant Pic - Picture Frame (Magnetic / Stand)

fridge magnets

toolmantim313

Printed the feet, lower and upper all together in multicolor. Then the arms separately and assembled. Lots of faces can be done. The 3mf file just has a few examples. You can see in the pic I had printed a ton more variations.

Minions

toys

K2_Kevin

This Hex Tray offers thicker walls for a more rugged tray. 1x1 Gridfinity base plate.

Hex Bin Gridfinity 1x1

gridfinity

Kit Crafters

<h2>Happy Holidays!</h2>To usher in the Christmas and holiday spirit, I present the Gingerbread House Kit Card! It features an easy to assemble model, with simple but great colors that print surprisingly well with the AMS or AMS Lite. Created by Kit Crafters!<h4>Included are 5 profiles:</h4>X1C/P1S/P1P<ul><li>Multicolor Frameless</li><li>Multicolor Framed</li><li>Single Color Frameless</li></ul>A1 Mini<ul><li>Multicolor Frameless</li><li>Single Color Frameless</li></ul>The prototypes and final prints were all done with Bambu Lab PLA Basic/Matte. The final model uses <a target="_blank" href="https://us.store.bambulab.com/products/pla-matte-filament?variant=41201616126088" rel="nofollow noopener">Matte Latte Brown</a>, <a target="_blank" href="https://us.store.bambulab.com/products/pla-matte-filament?variant=41078280061064" rel="nofollow noopener">Matte Scarlet Red</a>, <a target="_blank" href="https://us.store.bambulab.com/products/pla-matte-filament?variant=41201615569032" rel="nofollow noopener">Matte Grass Green</a>, and <a target="_blank" href="https://us.store.bambulab.com/products/pla-matte-filament?variant=41078280159368" rel="nofollow noopener">Matte Ivory White</a>. I absolutely adore kit cards and this one was inspired by <a target="_blank" href="https://makerworld.com/en/models/49240#profileId-51175" rel="nofollow noopener">berri3D's winning Halloween design</a>. <a target="_blank" href="https://makerworld.com/en/u/617127399" rel="nofollow noopener">Check out their work!</a>&nbsp;When printing the Gingerbread House Kit Card, different filaments and calibrations may make it too loose or too tight for the magnet to fit. I recommend changing the X-Y hole compensation to make it closer to being too loose so that the magnet can be inserted and super-glued if needed. The uploaded profiles need no changes for the X-Y hole compensation that I find works very well with Bambu Lab PLA.&nbsp;Thanks all for your support, enjoy the model as well as your holiday season!&nbsp;- Kit Crafters

Gingerbread House - Kit Card

christmas

JBGecko13

I needed a way to organize USB cables on my pegboard and could not find a good one online, so I learned onshape and made it.

Pegboard USB organizer

pegboard

The 3D Imagineer

Minnie Mouse Keychain/Zipper Pull. It makes a great zipper pull for backpacks.

Minnie Mouse Keychain Zipper Pull

Mickey Minnie mouse

svest1466

Funny no soliciting sign. Oriented to print face down for best quality.

No soliciting sign

signs

Diggle

Have some fun with your pumpkins this season with Pumpkin Pop ‘Ems! Choose a pre-determined ’kit' or mix and match your favorite items to create something unique! All you have to do is POP 'EM IN!&nbsp;Will continue to add various parts, but today I am launching with the ‘Bat’, he may look cute, but watch out for those teeth!!&nbsp;Since Fall brings cooler temps and the seasonal nature limits UV exposure, you can print this in PLA. However, to last for years to come, PETG is recommended.&nbsp;*all parts are designed to print on a flat side with no supports!!* AMS is highly recommended but not required as you can paint your prints after.

Pumpkin Pop 'Ems - 'Bat'

halloween

Theodor

This cookie cutter was made in Fusion 360 and then i printed it on my ender 3 from PLA plastic. If you want, you can check my profile for more cookie cutters :).&nbsp;&nbsp;&nbsp;.

Sloth cookie cutter

cookie cutter

cube3dworld

CHRISTMAS KEYCHAINS / DECOR FOR CHRISTMAS TREE Make people smile!&nbsp;Tips: - Change the color in Slicer, it looks better. - You can hang them on christmas tree as well. - You can send them togerther with christmas card to people you love.&nbsp;ALL CUBE3DWORLD designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

CHRISTMAS KEYCHAINS 

keychains

FunkyArt

<div><h1>Summary</h1><div>Don't waste your last meters of Filament, print your very own cable ties :) . This thing was created for the last meter contest on Printables. The cable ties are surprisingly stable and also flexible enough when printed with PLA, but you should switch to PETG or TPU if you want to put heavier load on them. The last meter is enough for exactly 3 pieces. </div><h1>Print Settings</h1>Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre></div>

Cable ties - Kabelbinder 

tools and such

wuguigui

<h2>Summary</h2>There is a specialized LED Kit for this mushroom lamp on Amazon now:<a target="_blank" href="https://www.amazon.com/dp/B0D75SLLY9" rel="nofollow noopener">https://www.amazon.com/dp/B0D75SLLY9</a>&nbsp;Updated 12/03/2023 A new cute pocket-size rechargeable mushroom lamp at: <a target="_blank" href="https://makerworld.com/en/models/12926" rel="nofollow noopener">https://makerworld.com/en/models/12926</a>I made a mushroom night lamp based on the small mushroom I made before: <a href="/thing:4978281" rel="nofollow">https://www.thingiverse.com/thing:4978281</a>It&#39;s easy to assemble, without screws(maybe need a little glue to stick the 9 caps on the head). I recommend LED light（less than 3.5W) with E27 holder for this lamp.If you were in China, you can buy the LED light and holder at: <a target="_blank" href="https://item.taobao.com/item.htm?spm=a1z09.2.0.0.40e02e8dHcE0ZZ&amp;id=654792151126&amp;_u=m25oc3248e8" rel="nofollow noopener">https://item.taobao.com/item.htm?spm=a1z09.2.0.0.40e02e8dHcE0ZZ&amp;id=654792151126&amp;_u=m25oc3248e8</a>Thank you for loving it! :)I also update a new version at( see the image below): <a target="_blank" href="https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-191671" rel="nofollow noopener">https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-191671</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-d431b608-d577-47f1-82e6-16aaae054c9a" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-d431b608-d577-47f1-82e6-16aaae054c9a</a>it has a new structure and is more compact with less filament.other 2 cute mushroom lamps:Mushroom Lamp B: <a target="_blank" href="https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-b-193906" rel="nofollow noopener">https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-b-193906</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-b" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-b</a>Mushroom Lamp C(suit small space 3d printers): <a target="_blank" href="https://www.myminifactory.com/object/3d-print-mushroom-lamp-c-196725" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-mushroom-lamp-c-196725</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-c" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-c</a>A funny Banana Lamp(free): <a href="/thing:5216983" rel="nofollow">https://www.thingiverse.com/thing:5216983</a>Banana Lamp 2.0: <a target="_blank" href="https://www.myminifactory.com/object/3d-print-banana-lamp-2-0-206292" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-banana-lamp-2-0-206292</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/banana-lamp-updated" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/banana-lamp-updated</a>My other designs: <a target="_blank" href="https://makerworld.com/en/u/2112721175" rel="nofollow noopener">https://makerworld.com/en/u/2112721175</a><h2>Print Settings</h2>Printer:snapmaker 2.0 A250 &amp; anycubic i3&nbsp;Rafts: No&nbsp;Supports:Yes&nbsp;Resolution: 0.2&nbsp;Infill:30-40%Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=any+PLA%2B" rel="nofollow noopener">any PLA+ </a>any<h2>Post-Printing</h2><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/212286bf-cf1d-4206-8ba1-40d3b8e90a15.jpg" alt="image">&nbsp;Mushroom Lamp Family&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/591e3f47-1d16-47f4-bbe4-0936b7d2f1b5.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/94bf8ef4-12d7-4148-aceb-69a083d8ad55.jpg">&nbsp;Printing with support&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/cf919e6f-b83c-4927-9acf-26c8caa0f570.jpg">&nbsp;Printing without support&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/89291392-bace-4a3b-b8e3-9fbd0593f90b.jpg">&nbsp;Printing without support

Mushroom Lamp

lamps

Jorge Rui

This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.&nbsp;<h3>Introduction</h3>In the first use of the AMS of bamboo, I found that the humidity level was very high, so I put all the bags of silica I had inside it, and try to solve the problem. After having dried all my material in an oven at 60ºC, yes, I know it is dangerous, but the truth is that it worked, and put it back on the AMS.The silica bags remained on the AMS, giving a horrible look to a piece designed with so much care in mind...You can see my first solution <a target="_blank" href="https://www.reddit.com/r/BambuLab/comments/153qohm/my_dream_team_the_x1c_combo_is_the_new_upgrade/?utm_source=share&amp;utm_medium=ios_app&amp;utm_name=ioscss&amp;utm_content=1&amp;utm_term=1" rel="nofollow noopener">here</a>, not good at all. Checked where I could &#34;hide&#34; the silica, but none of the ideas satisfied me....Eventually, the extra desiccant will no longer be needed. But in the meantime, the best place will be inside the spools. In this case it can accompany the spool when I put it in outside the AMS, when no longer need it.This design was good and elegant: <a target="_blank" href="https://www.printables.com/model/65922-silica-gel-spool-container," rel="nofollow noopener">https://www.printables.com/model/65922-silica-gel-spool-container,</a>I analyzed it and, re-created it from the ground-up to meet my construction and tolerance requirements. I share my work with this great community.&nbsp;This is an excelente complement for the <a target="_blank" href="https://amzn.to/3UZiEJO" rel="nofollow noopener">Sunlu S4 filament dryer </a><img class="image_resized" style="width: 27.93%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2024-05-26_1ebe389b9fef5.png"><h3>Note</h3>After some requests I&#39;ve made one with the mini thermometer/digital hygrometer embedded in the lid. For now is only available for members of my club in <a target="_blank" href="https://www.printables.com/model/598697-desiccant-container-for-spool-with-thermometer-hyg" rel="nofollow noopener">printables.com</a>.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2023-09-30_508077f273c79.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2023-09-30_a3ec384a6589b.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2023-09-30_f2377218e8c38.jpg"></figure></td></tr></tbody></table></figure><h3>Change log:</h3><ul><li>(20-07-2023) - Added an updated version, that I think it will be easy to print, removed the fillet on the Cap, and added a conic fillet on the bottom on the container (last image).</li><li>(09-09-2023) - Complete reconstruction of the model. The openings are now narrower for better bridging. the logo is embedded on the lid. File pre-configured for bambu studio</li><li>(29-09-2023) - Added step files.</li></ul>