Penguin_holic

JakeMakes

v2.1 now available!v1 could prevent the feeder from properly engaging if installed wrong (did this myself on 1 of 4), so I've replaced the profile.&nbsp;v2 resolved the above issue in my testing. This release also includes both PLA and PETG options, I prefer the PETG.&nbsp;v2.1 improved how the PTFE seats itself. It will now seat directly against the feeder instead of in the adapter. I am still running test prints to ensure this is the better option.&nbsp;I wanted to run PTFE all the way from inside the Sunlu S4 to the AMS Lite. I went through a few iterations of these, but these were the first that worked well enough that I wanted to post for others to use and get some feedback.&nbsp;The feeder button needs to be partially depressed to expose the entire rim for both ends to snap on. It is a snug fit and needs a little force to clip on. Much nicer install experience with PETG.&nbsp;I do not recommend attempting to speed this up with higher layer heights or the tabs and threads may fail, but of course feel free to experiment.&nbsp;These accept PC4‑M10 pneumatic push fittings with an M10/6mm thread. I can make variants by request.&nbsp;I have another version without the push fittings, but I wasn't confident in the connection. For how easy these are to come by, I decided this was the better solution.

AMS Lite Feeder Guard and PTFE Connector

Filament Dryer

misterryan

Update: I designed a full keycap set around this XDA profile (1U, 1.5U, … 6.5U): <a target="_blank" href="https://makerworld.com/en/models/227441" rel="nofollow noopener">https://makerworld.com/en/models/227441</a>&nbsp;A simple XDA-style keycap. The top surface is not curved like some XDA caps because printing the curved surface would create ridges.&nbsp;No supports and no brim needed. Print with the + facing down, and make sure to print with the smallest layer height (0.08mm) and enable ironing for the topmost surface for a smooth finish.&nbsp;You can use the provided STL file if you wish to include letters or symbols on the keycaps. If using Fusion 360:<ul><li>Convert the mesh to a solid</li><li>Scale the object down with a scale factor of 0.1</li><li>Create a new sketch on the top surface and add text.</li><li>Align the text to your liking and extrude the text sketch by no more than ~1mm (check the underside after extruding to make sure it did not create a gap through to the bottom from extruding too deep).</li></ul>Printed with ELEGOO PLA Plus filament (colors black and white).

XDA Style Keycaps (Blank)

keyboard 

laumerphilipp

<h2>The Ultimate A1 Workstation / Poopbucket Combo</h2>&nbsp;Hello Guys,&nbsp;this might seem no that much but im still a beginner in Fusion360 and thats my biggest Project so far.&nbsp;I have designed this Workstation/Poopbucket Combo that fits the new Bambulab A1, to store your spare Hotends, Filament Samples, and Accesories from your Printer.&nbsp;<h3>Poop Bucket</h3>A simple but big Waste-Bin for your Filament Poops. Designed to fit perfectly on the Z-Axis Case of the A1.&nbsp;&nbsp;<h3>Boxes in General</h3>All of the Boxes are designed to be stacked over another and have the Name of the Contents engraved.&nbsp;&nbsp;<h3>Filament-Sample Box</h3> In the Filament Sample Box you can store the Filament-Swatches delivered with your Printer. The Filament Swatch Card on the SD-Card of the A1 fits perfectly inside. It fits five Filament Swatch Cards so you have them near your Printer whenever you need them.&nbsp;&nbsp;<h3>Hotend-Box</h3>As the Name already says you can fit three Hotends in there. Im planning to upload another Version where you can store four or more.&nbsp;&nbsp;<h3>Accessorie-Box</h3>The Accessorie-Box has Space for the delivered Tools and Accesories of your Printer. Just take the plastic Inlet and put it in your freshly printend Box.&nbsp;.&nbsp;I hope you like the Idea and im looking forward to your printed Results.&nbsp;Best regardsPhilipp&nbsp;

A1 Workstation/Poopbucket Combo

Bambulab A1

sipura

Hello,UPDATE 26/1/2024:You can check you our new model, same like this one but XL bigger. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/157759#profileId-173134" rel="nofollow noopener">https://makerworld.com/en/models/157759#profileId-173134</a> &nbsp;&nbsp;UPDATE 19/1/2024:You can check you our new model, same like this one but smaller. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/146935#profileId-160286" rel="nofollow noopener">https://makerworld.com/en/models/146935#profileId-160286</a> &nbsp;My new model of the utility case.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x303pcs of screws M3x18&nbsp;Dimensions are in mm:&nbsp;<figure class="image image_resized" style="width:65.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_e25480cf53e6d.png"></figure><figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_97292542d7a98.png"></figure>NEW:&nbsp;Now we made V2 model that has thicker hinges on each side by 1mm behind, and wall loops with 3pcs. For this model, instead of 3pcs M3x18mm screws, you now need 3pcs M3x20mm.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-01-13_6bc78c7c28bab.jpeg"></figure>&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing and using this useful case.