Palazz

IDontKnow1988

I Love making Hueforge Pictures and I am going to upload more and more of them so follow me if you like my work and i would be happy if you give me a like :)&nbsp;You dont need an AMS . you can change manually the Filament if you want.&nbsp;you can also use other Filament if you like&nbsp;Use my Settings for best Results.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Yellow Transmission Distance: 10 PLA+ Sunlu White Transmission Distance: 5Swap Instructions: Start with Black At layer #6 (0.64mm) swap to Red At layer #13 (1.2mm) swap to Yellow At layer #19 (1.68mm) swap to White for the rest.

HUEFORGE - Gandalf vs Balrog Lord of the rings

oggetti nerd

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

abbigliamento 

MEAF designs

Say bye to boring afternoons with this amazing maze game! This will not only challenge your solving capabilities but also your collaboration and coordination skills with other people.&nbsp;It consists of a game for two people, where the objective is to take the marble from the initial point to out of the board but you must do it by pulling the corners through a rope to tilt the board and take it through the entire route. <figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_4crfxnliq8st.gif"></figure>&nbsp;&nbsp;Once you achieve it, you can increase the difficulty by changing one of the ropes and pulling in a cross, or trying to do it in the shortest possible time.&nbsp;<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_tcqmrkplsgno.png"></figure>&nbsp;I have designed this for a 6mm ball bearing, and the max build volume of an ender 3 or similar. so you will be able to print it in almost any printer&nbsp;I´ve made 2 levels: <ul><li>level 0 = easy to achieve, with little travel. to familiarize yourself and learn </li><li>level 1 = with more travel and possible paths. ideal to compete and improve </li></ul>&nbsp;and I'm working on an even more difficult one, let me know if you'd like it. &nbsp;every level starst at the circular wall (there is only one in each), and you have to take the marble to the path until it leaves the board.if you achieve both levels you can use them in other ways, for example starting at each of the corners and taking the marble to the official start or official exit. doing so they practically become 3 versions each&nbsp;you will need:Printed parts1 - game board4 - poles1 - maze of any level you want&nbsp;Not printed parts4 - rope sections of 30cm each (you can use whatever rope you have on hand, from a shoestring to paracord. just make sure you don't use fishing line and pretty much anything can work)&nbsp;1- hot glue gun, 3D gloop, or any glue of your choice for pla or printed material&nbsp;to assembly you just need to glue the poles to the board, and then pass the rope through them to tie the maze at the other end. you can check the pdf for more datailed instructions. &nbsp;&nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,28 mm for board and holders. 0.2 for mazeNozzle diameter: 0,4mm or 0,6mmInfill: 12-15%Perimeters: 2Support: noif you want a multi color maze just insert a filament change at: 1mm&nbsp;&nbsp;you can check all my other designs here<a target="_blank" href="https://www.printables.com/@dgoalva" rel="nofollow noopener">dgoalva | Printables.com</a>&nbsp;&nbsp;&nbsp;

Party Maze challenge

games

happyboard.company

A 2-part version of my swirled lamp shade.&nbsp;Its as easy to print as my other lamp shades and also does not need any support like the others. Orient both parts updisde down and hit print. Set the seam alignment to random for a better result.&nbsp;I added a testprint which only prints the interface part between top and bottom so you can check whether you'll need to calibrate your filament or not for a seamless result between base and top part.&nbsp;You'll also need the LED Hardware Kit 001 adapter and the Hardware Kit 001 itself. You can find a print profile of the adapter on this page, or you can download it from the official Bambu Labs account. I altered the bajonette adapter for a quite tight fit. You will need some force to get it into place, but it will fit tight and snug.&nbsp;I used Bambu Lab PLA Matte White for this lamp shade. PLA Marble will also look very nice on it. Get creative with translucent or gradient filaments to achieve other nice effects.&nbsp;0.2mm layer height2 walls22% gyroid infill

Swirled Lamp Shade ~48cm height for LED Kit 001

arredamento 

fishercraigj

This was purposely built to hold misc bottles that I use for paint.&nbsp;Update 11/9/23 - Adding 43mm width x 35mm tall &nbsp;Update 11/4/23 - I ended up having a little trouble with my supports sticking to the plate and things shaking loose and ruining the supports for the peg that attaches to the HSW wall. I've added an STL that throws a block underneath the pegs as if it was another part where the support can start from. Be sure to turn OFF build plate only supports. Since then I've had no issues with my supports.

HSW paint bottle holders

miniature 

BaGooN

This is a compact heat insert press that utilizes the affordable and readily available 150mm linear rail with MGN7H block. Instead of the adopted used return with a counterweight found in many designs, a printed spring takes its place, contributing to the reduction of parts count and simplification of assembly.&nbsp;Notes:<ul><li>The first step is to print test pieces to confirm compatibility with your soldering iron.</li><li>The spring is PETG, while the HolderArm, which comes in contact with the soldering iron, can be printed in PETG, ABS, or ASA. Other parts can be printed in PLA.</li><li>Springs should be printed with 100% fill rate.</li><li>I anticipate the use of soldering irons with a handle diameter of around 20mm. Please verify compatibility with your soldering iron using the test parts. Additionally, customization for your specific soldering iron can be achieved using the step file.</li><li>Precision relies on minimizing the play of the nut bar. Please start by printing Body.stl and then try Nutbar_Tolerance_Test to select the tolerance for printing the nut bar.</li><li>Special thanks to TheSnootch and Pluck3r!</li></ul>Required other than printed parts:  <figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/a85bfc04-623d-4d7d-af4c-10e6a6bd23b9.webp"></figure><ul><li>1x Soldering iron</li><li>1x 150mm rail with mgn7h block</li><li>7x M3x5x4mm heat-set Inserts </li><li>6x M2 nuts</li><li>10x M2x6mm screws</li><li>1x M3x6mm screw</li><li>4x M3x10mm screws</li><li>2x M3x12mm screws</li><li>3x zip ties</li></ul>Assembly:  0. Print a total of 6 parts ‘Body’, &#39;HolderArm&#39;, ‘NutBar’, ‘Top’ and 2x&#39;Spring&#39;.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/6fb76f40-7e38-4db4-9dff-67105dfb6c99.webp"></figure> 1. Installing M3x5x4mm heat-set Inserts on HolderArm at 4 points<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/b34a32e0-5a33-4cca-b2b1-8879d72a6f6d.webp"></figure> 2. Installing M3x5x4mm heat-set Inserts on Body at 3 points<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/622988ca-8ae3-456e-920b-548cf4fd27a4.webp"></figure> 3.  Installing M2 nuts on NutBar at 6points. Push the nut all the way in, otherwise the screw won&#39;t reach when installing the rail.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/ba52bad5-5bc3-4759-a707-7413cc95354c.webp"></figure> 4. Insert the NutBar into the body and secure the top part with M3x6mm screws.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/2309f20f-c6cd-40d1-9fb1-cc7bdebfac41.webp"></figure> 5. Secure the linear rail to the NutBar with M2x6mm screws at 6 points.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/a97e8850-24ca-4490-aa4d-3fab3939ed45.webp"></figure>  6. Secure the HolderArm to the linear guide block with M2x6mm screws at 4 points.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/ee26727d-711f-4417-a61b-fbc4e6d9575a.webp"></figure> 7. Attach two springs using M3x10mm screws, being careful not to tighten the screws too much. The springs need to have enough space to rotate freely. be careful not to remove the top part while the springs are attached, as the linear guide block pop out.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/873a125c-4cd6-405f-9cbf-410170eff1be.webp"></figure> 8. Secure the soldering iron to the holder using M3x12 screws.<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/4cdfac51-4b17-4c04-bbae-c3dae09fc214.webp"></figure> 9. Hold the wire in place with zip ties at three points to prevent it from protruding out .<figure class="image image_resized image-style-align-center" style="width: 357px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468455/design/dc417f9c-e6f9-4a02-9f0b-575b3512605c.jpg"></figure>

oggetti nerd

abbigliamento

games

arredamento

miniature

laboratorio