PakaPuka

This stackable bowl has a diameter of 22cm, a height of 3cm and is available in different divisions.This shell is best printed with PETG. Most PETG filaments are suitable for food. Also they can be put in the dishwasher. However, it depends on the manufacturer and filament.I use a Bambu Lab X1C for printing and the tray prints in 3-4 hours depending on the number of dividers chosen.

Snack Bowl / Snack Dish / Snack Plate

Kitchen

oktkas

&nbsp;There is a new version of this tool. Get it <a target="_blank" href="https://makerworld.com/en/models/49965#profileId-272674" rel="nofollow noopener">here</a>!&nbsp;A very useful keychain accesory. Only tool out there capable of opening all types of coin deposit locks, without the need for a coin and can be removed immediately.This redesign of my original <a target="_blank" href="https://www.printables.com/en/model/432195-universal-trolley-coin" rel="nofollow noopener">Universal Trolley Coin</a> features a strong solid body with a sheath for the special arm, which can be used to open the previously undefeated ‘drawer-style’ locks, as well as a slightly larger 24.5mm coin adapter to ensure maximum compatibility.<h3>Printing instructions</h3>PETG works best, but you can use other materials, even PLA. Generic settings for 0.4n and 0.2l work great, though you might want to slightly increase the number of perimeters, or even use 100% infill. Print as-is and fold afterwards. You might need to slightly scrape the end of the arm to make it fit snugly into the sheath, depending on your printer.<h3>Use in the field</h3><img src="https://media.printables.com/media/prints/548069/rich_content/36b9d665-fa2e-45a1-90cb-b2c3c44b502f/thumbs/cover/800x300/png/push-drawer.webp"><h4>Push-style locks</h4>Most locks out there are of the simple, push-style desing. To defeat these, just insert the tool into the coin slot. Once the lock opens, you can safely remove the tool again.<h4>Drawer-style locks</h4>Drawer-style locks require the use of the special arm. (the following pictures show an earlier version of this tool, but it works the same way)&nbsp;1. Insert the arm alongside the drawer, then close the drawer as far as it will go.<img src="https://media.printables.com/media/prints/548069/rich_content/4f804945-b1f8-4407-afa1-998aa57e18ef/1.jpg">&nbsp;2. Hold the drawer jammed and pull out the arm.<img src="https://media.printables.com/media/prints/548069/rich_content/94e1cdf9-f09f-4f68-ab2b-8d219aa135ed/2.jpg">&nbsp;3. Close the drawer.<img src="https://media.printables.com/media/prints/548069/rich_content/c59aaa2b-b9ce-4c7a-af85-34bbbe8510db/3.jpg"><h4>Testing &amp; validation</h4>Testing has been done on locks like <a target="_blank" href="https://www.wanzl.com/en_GB/products/coin-deposit-systems-and-machines/coin-deposit-systems/classic-coin-deposit-system~p1488" rel="nofollow noopener">these</a> or <a target="_blank" href="https://www.wanzl.com/en_GB/products/coin-deposit-systems-and-machines/coin-deposit-systems/starbox-r-coin-deposit-system~p1480" rel="nofollow noopener">these </a>in various stores in the Czech Republic, Germany and Ireland. All parameters of this tool have been carefully selected to make it truly universal, hopefully worldwide.If you encouter any issues or oddities while using this tool, I&#39;ll be happy to hear about your experience. Feel free to use these <a target="_blank" href="https://drive.google.com/file/d/136iCC2eIKy6zGeOMKhnhTnAxljvVKT-t/view" rel="nofollow noopener">test samples</a> with varying coin diameter and report your findings.

Kitchen

Tools