PPAC37

M-Factory

A stylish Pen Holder with Japanese Patterns.The panels in the picture were cut with a Laser but I included the files so they can also be 3D printed.The pen holder is 10cm tall (102mm) and the inlays are 6.5x9.2x0.3cm (65x92x3mm). Printed with Curas standard setting and Fuzzy Skin on the outside only. Commercial license available <a target="_blank" href="https://cults3d.com/en/3d-model/home/pen-holder-with-japanese-style-panel-inlays-commercial-license" rel="nofollow noopener">here!</a>

PEN HOLDER WITH JAPANESE STYLE PANEL INLAYS

TODO

Wall art

Romwba3D

A Cute lamball from Palworld Fan Art split for multi-colour printing with just one AMS&nbsp;I used Bambu Lab Filment&nbsp;i have also included a single colour STL file single colour or resin printing&nbsp;I have uploaded a 3mf Print profiles for 4 colour for both the X1C/P1S/A1 and also for the A1 Mini&nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;Please note the Multi Colour RAW STL Files are designed to be printed all at once by importing into your slicer as a Muli STL and not printed seperatly and glued togeather. If you print them that way they may not fit correctly&nbsp;You can view all the Available Models - now over 275 on https://www.romwba3d.com

Lamball Palworld

MultiColor NeedMMU

bruno.galam

<h3>=============PLEASE LIKE AND SHARE=============</h3>&nbsp;Another character designed entirely in Fusion.Printed in parts and assembled (no glue required unless you scale).&nbsp;WARNING: All tolerances are very precise so well tuned printer required !!!

Multicolor Multipart Kirby (No MMU)

MultiColor NoMMU

origoworld3d

Scary Halloween Castle for wall art decoration made via Hueforge. Colours are included in 3mf file (made in OrcaSlicer and BambuStudio) but can be adapted according to your needs. The stl file is also included if you want to make your own experiment. It was printed with a 0.08mm as layer height and 0.16mm for the first layer, and 100% infill with rectilinear pattern.Don't forget to upload your make! Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA PolyTerra Lava Red Transmission Distance: 1 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyTerra Cotton White Transmission Distance: 2.5 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyTerra Cotton White Transmission Distance: 2.5&nbsp;Swap Instructions: Start with Charcoal Black At layer #4 (0.4mm) swap to Army Blue At layer #6 (0.56mm) swap to Lava Red At layer #7 (0.64mm) swap to Sunrise Orange At layer #10 (0.88mm) swap to Cotton White At layer #13 (1.12mm) swap to Savannah Yellow At layer #19 (1.6mm) swap to Cotton White for the rest.

TODO

Wall art

MultiColor NeedMMU

MultiColor NoMMU

HeuForge