PJKingz

models

NickGHauge

Easily carry 6 of your favorite cans! Print this sixpack! It has a removable handle that&#39;s also very durable!The crates can be stacked when the handle is removed.&nbsp;Available designs, just click download STL!Coca Cola Pepsi Max Heineken Hancock Tuborg Carlsberg Haas F1 TeamFaxe KondiRedbull Bitburger If you want a different logo, please let me know.A tool is also included for easy removal of the handle!

Sixpack with removable handle!

storage

Josh-3D

[Introduction]6/27/2024 - I just wanted to say thank you to everyone that has downloaded and printed the shuffler! I&#39;ve had a few bumps in the road, and a few bugs to work out. I appreciate you all, the comments, the suggestions, and I&#39;m sorry for any of the issues caused by trying to get these early bug fixes and everything out there. It&#39;s like my own little No Man&#39;s Sky! My personal A1 Launch, haha. &nbsp;I had to adjust the model for sleeved cards, and I realized that might have caused some troubles for those that might have started printing the original one and then tried switching to the updated version. If it makes you feel any better, I&#39;ve got a whole pile of parts from upgrading the ones I made prior to my o-ring fix. &nbsp;I&#39;ve updated the instructions with some written notes to help clarify the assembly where needed. Hopefully I&#39;ve covered everything. &nbsp;I&#39;ve updated the BOM to include the o-rings properly for when you go to buy the parts from Maker&#39;s Supply. &nbsp;6/23/2024 - Minor Update. I had updated the profiles, but the X1/P1/A1 Profile didn&#39;t get updated correctly, it appears. I&#39;m very sorry about this. I&#39;ve just updated it and verified. If you want to make sure you have the latest, it&#39;s simple; the original had a plate for the TPU rollers all their own, but in the new profiles, they are part of the plate with the shafts since they are PLA now, with O-Rings. &nbsp;6/22/2024 - Big Update! I adjusted the model to accommodate sleeved cards. I had to ditch the TPU rollers. They worked for the most part for un-sleeved cards, but weren&#39;t perfect. For sleeved cards, it was no good. Luckily for me, Bambu started to carry O-rings on the Maker Supply, and Bob&#39;s your uncle, we&#39;re in business. It&#39;s much better. As much as I wanted to like TPU rollers, they were just still too smooth. I&#39;ll update the BOM section fully once I can link to the Maker&#39;s Supply entry for the o-rings. They are easy to find elsewhere too though like on amazon, or even your local hardware store for that matter. &nbsp;This update has a slightly longer base, so all the mid sections are a little longer. Ends/gears all stay the same. It&#39;s been working well for sleeve and unsleeved cards for me, in the Skip-bo to regular playing card size. Should be able to handle things like MTG and your other beloved sleeved card games. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-07-01_424973d9eac09.png">&#34;</figure><figure class="media"><oembed url="https://www.youtube.com/watch?v=d2rctBx6R20"></oembed></figure>I haven&#39;t been to keen on the card shufflers available commercially, and feel most of the ones designed for 3d printing don&#39;t really elevate themselves to a consumer level product. Thus, this card shuffler was born. I wanted something stylistic, and not just functional. Inspired by old printing presses, with those cast iron frames. Although, it looks a bit like a boiler too, I&#39;d say.&nbsp;Sized for standard playing cards. (64x89mm + plus sleeves, or there abouts, is the max size card it&#39;ll shuffle). I sized it to be able to shuffle a full skip-bo deck, which is 160 cards. It can do about 80 sleeved cards, in testing. Might have to make an extra tall version for bigger decks and big sleeved decks! &nbsp;It&#39;s been running smoothly for me, especially since upgrading to O-rings. The grip on them is much better than the original TPU rollers. There are occasional jams that happen, when the cards don&#39;t fall right. I think as long as you aren&#39;t going too slow and keep a good pace, usually it&#39;s fine. Sometimes it helps to shift the whole thing back and fort slightly to shake the cards loose and get them to settle. &nbsp;[Hardware Required]&nbsp;Featured FilamentsBambu PLA Metallic Iron GrayBambu PLA Metallic Copper BrownBambu PETG-CF Brick Red&nbsp;Bambu PLA Galaxy NebulaBambu PLA Glow GreenBambu PLA Metallic Copper Brown&nbsp;Bambu Matte Grass GreenBambu Marine BlueBambu Lemon Yellow&nbsp;Notes about PrintingAs Noted, you&#39;ll want TPU for the pads. At least that&#39;s what I designed and set them up for. I also set them up to use fuzzy skin, to hopefully give a little more texture to grab onto the cards. &nbsp;I highly recommend using a smooth PEI bed. (It&#39;s not required, and you can absolutely print the whole thing on your bed of choice. I just highly recommend the Smooth PEI bed for PLA because it holds well, and for smaller parts with a thin profile on the bed, it tends to hold much better. Like the spacers I use in step 4.)&nbsp;Hardware Required :36x M2.6x8mm Self Tapping Screws (Bambu&#39;s BT2.6x8mm self tapping screws) (From the <a target="_blank" href="https://us.store.bambulab.com/collections/self-tapping-screws/products/bt2-6-socket-head-cap-self-tapping-screw-shcs" rel="nofollow noopener">Bambu US Store</a>)9x MR128ZZ Ball Bearings (inner = 8mm, outer 12mm, height = 3.5mm, such as <a target="_blank" href="https://www.amazon.com/uxcell-MR128-2RS-Groove-Bearings-Double/dp/B082PPLHLQ" rel="nofollow noopener">this one from Amazon</a>, or from the <a target="_blank" href="https://us.store.bambulab.com/collections/steel-deep-groove-ball-bearings/products/micro-steel-deep-groove-ball-bearings?variant=42504744960136" rel="nofollow noopener">Bambu US store</a>)4 O-Rings OD 24x2.5mm  ( From the <a target="_blank" href="https://us.store.bambulab.com/collections/makers-supply/products/o-rings?variant=42561621753992" rel="nofollow noopener">Bambu US Store</a>)&nbsp;[Upgrading from the TPU Roller version]<figure class="image image_resized" style="width: 51.3%"></figure>If you&#39;ve already printed the card shuffler, but want to upgrade, please refer to the above graphic for the parts you&#39;ll need to reprint. Make sure you print 2 of the axels, pad drums, and the card holder/bracket. In addition you&#39;ll need two extra screws to secure the drums to the axels, and the 4 O-rings. &nbsp;If all you want to do is upgrade the pad drums, then you should be able to slide them on the original axles, however be aware that they aren&#39;t secured with friction like the TPU pads were, so you might need to glue them or use some other method to fix them once installed, if the fit is too loose. The new axels are slightly longer, but also have a hole for a self tapping screw to tap into. &nbsp;&nbsp;[Assembly]<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-15_2b08e90375684.png"></figure>Step1: Screw the end plates on. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-15_1adb06ad5af73.png"></figure>Step2: Assemble the two side card holders, then slot them in and screw them into the main body. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-07-01_8bbf798eae572.png">&#34;</figure>Step3: <ul><li>Install the o-rings onto the two drums.</li><li>Install the bearing on the end of the shaft and then screw the end cap into place to keep it secure. </li><li>Insert the drum into place, and then insert the shaft through the drum and the main body. Install the set screw to set the drum into place.</li></ul>(Caution: Do not overtighten! Loosen screw a little of bearings bind)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-07-01_cab12fd5e7267.png">&#34;</figure>Step4: <ul><li>Insert the bearings onto the shafts, followed by the spacer and then the gear. Make sure the bearing is fully seated.</li><li>Make sure the gears are orientated right. The Arrow pattern on the gear should point in the direction of travel. Inward! </li><li>Screw the gears into place. </li></ul>(Caution: Do not overtighten! Loosen screw a little if gears bind)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-07-01_ebf978ef5c756.png">&#34;</figure>Step5:<ul><li>The Tricky part</li><li>For each gear there is a gear peg and the bearing. Insert the bearing into the end plate, and insert the gear peg into the gear. Make sure the gears are fully seated.</li><li>I insert the small gear and then the large one. With the large one I try and angle it in a little, and use a little force to jam it into place. </li><li>You&#39;ll want to try and rotate the pads so the flat ends are opposite each other before installing the large gear. </li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-07-01_15779ddde2fa8.png">&#34;</figure>Step6: Insert the bearings into the gear bracket and make sure they are fully seated. Screw the bracket into place. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-07-01_f1903c7fa1759.png">&#34;</figure>Step7: <ul><li>Insert the bearing into the crank arm, and then sandwich it between the peg and knob, and secure it with a screw. </li><li>Screw the crank arm onto the large gear&#39;s shaft with an end cap to help keep it secured. </li><li>Shuffle some cards! </li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-15_9c88d6ec0f9ee.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497170/design/2024-06-15_c4986513a4b3f.png"></figure>&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information. on.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Card Shuffler

tools

Randomizy

Last Version of the Snowflake Fidget Spinner; lighter and with an unique visual effect during its spinning ❄&nbsp;To finish with the fidget spinner strand and its winter version, here is another adaptation of the <a target="_blank" href="https://cults3d.com/en/3d-model/game/snowflake-fidget-spinner-basic" rel="nofollow noopener">Snowflake Fidget Spinner</a>, this time with a line that goes into the shape, making it even lighter and giving it an even different effect when spinning ❄&nbsp;Made of interlocking circles, feel free to print this spinner in your own unique style and enjoy playing with it, whether you want to spin it all the way around or just fidget with the inner circles! 😁&nbsp;Please let me know in the comments if you would like me to create some more types of fidget spinners in the future!- - -<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/257654/2023-12-03_x2j1xk4h02vh.gif"></figure>- - -Size: 7 x 8 x 0,5 cm (W, L, H)It's a print-in-place design, so no support needed nor assembly is needed.If you like, you can add a drop of lubricant or light oil in the center handle to help the spinner spin faster with less friction.&nbsp;If you find it a bit tricky to hold it properly in your hand and make it spin because of the small grip, I suggest you to try printing it with a larger size and see how you it works for you.---For any inquieries, please don't hesitate to contact me.---Please don't be shy and upload your make!(If you share it on your socials, please be sure to tag : @randomizy.3d [FB / IG] ; @randomizy3d [Twitter / Tik Tok] so that I can see it!)_Check out my Instagram to see all of my works: <a target="_blank" href="https://www.instagram.com/randomizy.3d/" rel="nofollow noopener">https://www.instagram.com/randomizy.3d/</a>_If you like my work and would like to support me so that I can bring you new content, receive exclusive benefits and models, and you're interested in having a commercial license for selling your physical printouts of my designs (not files), please consider checking out my link: <a target="_blank" href="https://linktr.ee/Randomizy" rel="nofollow noopener">https://linktr.ee/Randomizy</a>

Snowflake Fidget Spinner (Hollowed)

for daniel

3Demon

This is a digital 3D printable model of Mandalorian Mudhorn signet shoulder armor.The download contains 3D models ready to be 3D printed on a 200 mm print bed in STL and OBJ formats. It’s placed on the print bed as we would print it to save you time.SIZE At 100% scale the model’s dimensions are approximately: Width 175 mm Length 136 mm Height 227 mm You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well. We create our 3D models on our average-sized body template. Read about the sizing and how to scale the models to fit your body here.PRINTER SETTINGS We use these settings for most of our prints: Layer height 0.15 mm Infill 15% Supports 45° For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.Printing settings will vary greatly depending on your specific printer.Link to the complete Mandalorian armor <a href="https://3d-mon.com/3d-model/groupe/male3dprintmodel/the-mandalorian-armor-helmet-rifle-blaster-separately/" rel="nofollow">here</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000462688/design/2024-05-13_r86ef4mekyxs.jpg"></figure>We try to make the models in a way that uses as little support material as possible. This model is meant to be post-processed after printing.Do you like the model and don&#39;t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:<a href="https://3d-mon.com/links/" rel="nofollow">Social Media Links</a>

Mandalorian Mudhorn signet shoulder armor

mando

Galactic Armory

Make your own Galactic Armory themed Spartan helmet!&nbsp;Based off concept art from GC_ConceptArt, this is an envisioning of the classic Galactic Armory logo with a Halo Spartan helmet!&nbsp;The faceplate is able to be removed with the help of 10mm x 3mm circular magnets!&nbsp;Includes both assembled and pre-separated versions for easy printing.&nbsp;Use the visor cutout template to trace an outline on your visor material. Then slot the cut out shape into the pre-modeled ridges on the inside of the helmet!&nbsp;You'll also find the large parts have been pre-cut for smaller printers.&nbsp;If you would like to use these files for commercial use, please subscribe to the "Specialist" tier of my Patreon here: https://patreon.com/galacticarmory

Galactic Armory Spartan Helmet

usefull

Big Plate Chicken

Damon Dragon is a very cute design. We combined it with popular AI painting to create an IP property 2024 Year of the Dragon figurine model. It's perfect for printing in the four colors of bambu's AMS or AMS lite because we have made the eyes, body, belly, etc., into segmented models, making it easy to modify their colors. We believe your children or girlfriend will love this design!&nbsp;Strongly recommend using AMS for multi-color printing, as it allows for arbitrary color adjustments. We have designed each independent area in segments, making it easy to modify the color blocks on its body.&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/ZVggmbuP4_8?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=ZVggmbuP4_8"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/ZVggmbuP4_8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

models

storage

tools

for daniel

mando

usefull

key chains