PHvD__

Basti85

Hi guys,&nbsp;the project is not completely finished yet. there is more to come soon :) ..so stay tuned!&nbsp;<h3>The filament I used:</h3><ul><li>Bambu white<ul><li><a target="_blank" href="https://eu.store.bambulab.com/de/products/pla-matte-filament?variant=43992833229019" rel="nofollow noopener">https://eu.store.bambulab.com/de/products/pla-matte-filament?variant=43992833229019</a></li></ul></li><li>GIANTARM transparent PLA<ul><li><a target="_blank" href="https://www.amazon.de/dp/B07Q1PGH4B?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B07Q1PGH4B?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details</a></li></ul></li></ul><h3>Hardware:</h3><ul><li>WS2812B LED Stripes (white) - you can also order the ones within the Bambu-Shop (see BOM below) and skip the ESP8266 controller<ul><li><a target="_blank" href="https://www.amazon.de/gp/product/B0BTVB7WRY/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&amp;psc=1" rel="nofollow noopener">https://www.amazon.de/gp/product/B0BTVB7WRY/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&amp;psc=1</a></li></ul></li><li>ESP8266<ul><li><a target="_blank" href="https://www.amazon.de/dp/B0CLGXJCZX?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B0CLGXJCZX?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details</a></li></ul></li></ul>&nbsp;A detailed description will follow as soon as the project is over. Expect more to come (corner connections, …).&nbsp;BR &amp; happy printing!B@sti

[WLED] Küchenabschlussleiste | Kitchen Backsplash

LEDs

Evo 3D

This BOX can also have a fan 40x40x10mm mounted.&nbsp;M3x20mm for the boxM3x5mm for RPi3M3x14mm for fan

Raspberry Pi3 B+ Media Player BOX

Raspberry Pi

JonathanLevi

I really liked haitonno's design for this drill dust collector, but for some reason, it was "upside down" from what my Dyson would need. So, I flipped the button/lid around. Much better.I printed in 0.3 resolution, and the button broke almost immediately - so probably print it in 0.2 to be safe.Category: Tools

Dyson V7 - V11 Drill Dust Collector - 180 Degrees Inverted

Oooh!

Turtleyawesome

After printing <a target="_blank" href="https://www.printables.com/model/489870-bambu-lab-p1p-clean-look" rel="nofollow noopener">Sven&#39;s Clean Look</a> model for my P1P, I knew straight away that I needed the same look for the rear too! I have no need for an enclosure any time soon but I still wanted to give the printer a nice look.&nbsp;I took the files from the <a target="_blank" href="https://www.printables.com/model/377515-bambu-lab-p1p-lite-enclosure" rel="nofollow noopener">Lite Enclosure</a> and gave the accent pieces a rounded appearance to blend in with the P1P a bit more. At the same time I also removed any unnecessary features that are needed for the clear panels to attach to. &nbsp;The bottom left side piece was also adapted to sit flush with the bottom of the printer to aid in removing any stray bits of filament that have fallen down. It flaps when touched due to there not being the clear panel present but a piece of double sided tape would help. I haven&#39;t done this but the option is there. The original side piece is also included too.&nbsp;In terms of printing, please refer to Sven&#39;s detailed instructions from the Lite Enclosure as the parts are ultimately the same. This also applies to the tools and screws needed. Just ignore the ones for the clear panels.&nbsp;Pictured is the side mount spool holder and filament guide that you can <a target="_blank" href="https://makerworld.com/en/models/22531" rel="nofollow noopener">find here</a>.&nbsp;Another nice upgrade is this <a target="_blank" href="https://www.printables.com/model/530465-bambu-lab-p1p-backpanel" rel="nofollow noopener">Rear Panel Cover </a>from Vadity to complete the look!&nbsp;

LEDs

Raspberry Pi

Oooh!

P1P parts