PBorkulak

Ryschweitzer

A Lord of the Rings book nook inspired by Bilbo&#39;s Hobbit Hole called Bag End.&nbsp;ASSEMBLY GUIDE ATTACHED

Lord of the Rings Bag End Hobbit Book Nook

Lord knows of the Rings

KXNT

Designed to fit my 2020 Tesla Model 3, may fit other years as well. I downloaded another model from here that was designed to fit a 2021 and it did not fit my 2020 so made my ownTesla Model 3 J1772 adapter holder for door cup holder.Slides into place easily as shown in the gif.&nbsp;

Tesla Model 3 J1772 adapter holder for door cup holder

Tesla

PenolopyBulnick

These earrings are modeled after The Great Wave off Kanagawa, a woodblock print by Japanese ukiyo-e artist Hokusai which is in the Public Domain. This art piece was used as a prompt on <a target="_blank" href="https://www.craiyon.com/" rel="nofollow noopener">Craiyon.com</a> to generate an image, which was then run through <a target="_blank" href="https://shop.thehueforge.com/" rel="nofollow noopener">HueForge</a> (which I have a commercial license for) and further edited to make the final earrings here.&nbsp;&nbsp;Earrings are mirror images of themselves, but I uploaded them separately and they are separate in the print profiles as well if you want to do them the same instead of mirror images. A little loop was added to the top to make it an earring.&nbsp;There are three sizes of earrings and most pictures show the medium size. I will provide print profiles for all individual earring sets as well as one that has all.&nbsp;Attach piece to 2 jump rings and earring (2 jump rings helps it hang right).&nbsp;Color changes are done between layers, as designs done with HueForge are.Layers 1 - 6 : Egyptian Blue (Inland)Layers 7 - 11: Peacock Blue (Hatchbox)Layers 12 - 17: Light Blue (Inland)Layers 18 - Top: White&nbsp;.08mm Extra Fine settings were used with .4 Nozzle.Ironing was used on ALL top surfaces, but this can be a matter of preference.Gyroid infill is used where it is necessary but 100% infill could also be good with how small and thin it is.I use a Prime Tower, but it is small. Possibly not necessary but helps sometimes.&nbsp;<figure class="image image_resized" style="width:61.92%;"><img src="https://makerworld.bblmw.com/makerworld/draft/384759/2023-12-30_acd59845d35b8.jpg"></figure>

The Great Wave off Kanagawa HueForge Earrings

JDJDJD

The GigaLight is perfect for your work area, desk, nightstand, bookshelf, coffee table, or anywhere else you want to have something interesting to look at.&nbsp;The lantern itself prints on a single build plate.&nbsp;Each side of the lantern has 2 vertical slots for the panels, one in back and one in front. The back slot is for the white diffuser panel, and the front slot is for the artwork panel. This means no filament changes and an AMS isn’t required. Multiple layered panels also give it an authentic quality and multi-dimensional feel. No panels at all gives it a classic modern feel!&nbsp;<ul><li>Designed for FDM printing</li><li>No Brims</li><li>No Overhangs</li><li>No Supports</li><li>No Post Processing</li></ul>NEW: Get Additional Panels!&nbsp;Some people have asked for a way to purchase additional artwork panels which you can now do at the link below. For my fellow Bambu Lab fans, I'm offering a 35% off promo code for a short period of time - 35% off Code: NSBL35&nbsp;Get Stars Panels here: <a target="_blank" href="https://www.etsy.com/listing/1615649668/stars-tea-light-lantern-3d-printable" rel="nofollow noopener">https://www.etsy.com/listing/1615649668/stars-tea-light-lantern-3d-printable</a>&nbsp;Get Vintage Star With Pine Tree Artwork Panels here: <a target="_blank" href="https://www.etsy.com/listing/1620403447/christmas-vintage-star-tea-light-lantern" rel="nofollow noopener">https://www.etsy.com/listing/1620403447/christmas-vintage-star-tea-light-lantern</a>&nbsp;Get Snowflake Artwork Panels here: <a target="_blank" href="https://www.etsy.com/listing/1619805091/christmas-snowflake-tea-light-lantern-3d" rel="nofollow noopener">https://www.etsy.com/listing/1619805091/christmas-snowflake-tea-light-lantern-3d</a>&nbsp;Get Christmas Tree Artwork Panels here: <a target="_blank" href="https://www.etsy.com/listing/1600926680/3d-print-gigalight-tea-light-lantern" rel="nofollow noopener">https://www.etsy.com/listing/1600926680/3d-print-gigalight-tea-light-lantern</a>&nbsp;Get Tea LightsSmall tea lights can be purchased at many places for less than $1 each. I recommend the small tea lights that are usually around 1.4” diameter x 1.25” tall. The maximum candle diameter is 52mm. Here’s an example: <a target="_blank" href="https://www.amazon.com/dp/B07T58ZJQT?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B07T58ZJQT?ref=ppx_yo2ov_dt_b_product_details&th=1</a><h3>Tips:</h3><ul><li>I print the artwork panels using the Smooth PEI Plate, or the Textured PEI plate and both work very good with easy removal. If you use the Cool Plate, you may need to be a bit more gentle removing the art panels with your scraper.</li><li>Wash your plate with soap and water before starting all prints.</li><li>The top screw caps only need to be gently tightened by hand to hold the top in place.</li><li>“Bambu Lab Logo With Text” panel will have some character/rounding to the lettering. If you want to crisp it up, you can use a razor blade to do so. The logo in the photo is straight off the printer with no cleanup. If you want to play it safe, print the Bambu Logo (without text).</li></ul>Assembly is easy, but if you have any questions just message me and I'll help you out!&nbsp;The GigaLight can not be sold.

Tea Light Lantern - GigaLight

Lights & Lamps

franceschellifederico

Stackable Organization Box for Various Objects - Designed from ScratchIntroducing a versatile and stackable solution for categorizing and organizing assorted items! This intricately designed 3D-printable box is a result of inspiration drawn from various models and meticulously crafted from scratch. Its modular design allows for seamless stacking, optimizing space while keeping your items neatly arranged by type.Key Features:<ul><li>Stackable design for efficient space utilization.</li><li>Thoughtfully crafted from the ground up for ease of 3D printing.</li></ul>Designed with attention to detail and practicality, this box is perfect for hobbyists, makers, or anyone seeking an innovative way to organize belongings. Elevate your storage game with this uniquely tailored solution!

Stackable Organizer Box

Desk Tools

Josh-3D

Check out the other two games in the series<a target="_blank" href="https://makerworld.com/en/models/140755#profileId-153348" rel="nofollow noopener">Checkers</a><a target="_blank" href="https://makerworld.com/en/models/134530#profileId-145997" rel="nofollow noopener">Chess</a>&nbsp;[Update] After getting some feedback, I adjusted the print profile, so the color change isn&#39;t discharged into the infill. I also increased the bottom shell layers. Since the main color scheme of this is white/black/green, it makes sense to reinforce those settings to avoid color bleed. Also added an A1 Mini plate for the Mini users!&nbsp;[Update 2!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/840057458" rel="nofollow noopener">Wcad00 </a>for the added clip![Update 3!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/982974221" rel="nofollow noopener">SoftWareCrash </a>and <a target="_blank" href="https://makerworld.com/en/u/425227684" rel="nofollow noopener">Adminstrator</a> for their contributions. The “Pocket” version, a 50% scaled version, and for a set of Xs and Os, with the Xs cut to fit inside the Os.&nbsp;A Travel TicTacToe game, for those long spans stuck at sea, where you don&#39;t want to risk using a pencil on the side of your life raft! Or uh, you know, any other occasion too, like road trips down the coast with friends, or spending family time playing games!&nbsp;Player piece quantity is setup so that X goes first!&nbsp;The clearance is tight. The X and Os should fit fine, but if your printer is sloppy, it might be a tight fit.&nbsp;&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.&nbsp;&nbsp;

TicTacToe - Travel Edition

Board Games

Yanneck

Einfache Blumenvase für Trockenblumen. Die Vase ist in verschiedenen Größen hochgeladen und kann auch nach belieben skaliert werden. Lässt sich leicht drucken und sieht hochwertig aus. Für gewünschte Veränderungen oder Ideen gerne einen Kommentar da lassen.&nbsp;Lasst doch gerne einen Kommentar oder eine Bewertung da, dann kann ich meine Designs weiterhin optimieren.&nbsp;Simple flower vase for dried flowers. The vase is uploaded in different sizes and can also be scaled as desired. Prints easily and looks nice.&nbsp;If you want any changes or ideas, please leave a comment.&nbsp;Please feel free to leave a comment or an evaluation so that I can continue to optimise my design.

Modern Vase, Spiralvase, Minimalvase 250mm, different sizes, verschiedene Größen

Vase

h3li0

planter with pattern designed in fusion 360includes plate&nbsp;photo shows printed in matte blue PLA&nbsp;print profile included&nbsp;part of the patterned planter series:<ul><li><a target="_blank" href="https://makerworld.com/en/models/148633#profileId-162202" rel="nofollow noopener">planter with concave pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/148649#profileId-162217" rel="nofollow noopener">planter with horizontal pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/90177#profileId-96589" rel="nofollow noopener">planter with wavy pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/95872#profileId-102213" rel="nofollow noopener">planter with circle pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/98294#profileId-104777" rel="nofollow noopener">planter with zigzag pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/108743#profileId-116153" rel="nofollow noopener">planter with polygon pattern</a></li></ul>If you enjoy using this 3D model and are able to, please consider supporting my work by <a target="_blank" href="https://www.buymeacoffee.com/h3li0" rel="nofollow noopener">buying me a coffee</a>. Your contribution goes a long way in fueling future creations. Thank you for being a supporter!&nbsp;note: all photos uploaded are of the actual printed model, taken inside a lightbox or in natural light on top of a desk / table

planter with polygon pattern

Planters

jarvizar

3d miniature of Toronto, capital of Ontario in Canada!&nbsp;&nbsp;Check out my collection of other Canadian miniatures: <a target="_blank" href="https://makerworld.com/en/@jarvizar/collections/766210" rel="nofollow noopener">https://makerworld.com/en/@jarvizar/collections/766210</a>&nbsp;Collection of all my miniatures: <a target="_blank" href="https://makerworld.com/en/@jarvizar/collections/146964" rel="nofollow noopener">https://makerworld.com/en/@jarvizar/collections/146964</a>&nbsp;&nbsp;Model created in Blender using data primarily from the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;<h3>Slicing & Printing Details</h3>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls. Can also try enabling “Detect Thin Walls”.&nbsp;The included “Designer Profile” should have the above settings pre-applied and is ready to slice & print!&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 6.8in by 4.8in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/723530/2023-12-22_a8fa62e18a031.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

Toronto Ontario 3D Miniature

martin.taichl

This is my model of the Raptor Class Light Cruiser from the Show the Expanse. This ship appeared as the infamous Pella in the Free Navy colours. I however made it in its original MCRN colours and with my own name. (The colour structure is my own design based on the previous MCRN ships). The ship is made to be in scale with my previous MCRN ships so it is fricking huuuge and heavy - over a meter long. The ship also comes with the standard features for the MCRN ships: - Retractable PDCs 9x - Retractable Airbridges 2x - Openable Torpedo Tubes with torpedos 4x - Openable Drone Hub with a Drone 1x - Stand with a Placket The ship is a kit and does not require a single drop of glue. The assembly is however quite complex so I highly recommend to watch the entire Playlist on my YT channel where I go step by step with it, &nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/r2WJjA7KOys"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/r2WJjA7KOys" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Raptor Class Light Cruiser From the Expanse

The Expanse

Crafty Sven

This little creature does require support for the body. There's pre-sliced and pre-supported files for both Bambu and Prusa. The colors can be whatever; this can be shades of green, orange, blue. Whatever you have !The nice color of the body is Mukha PLA by Fillamentum. Glue required to glue the face to the body, use the nose for simple guidance.AMS requires 3 colors. Feel free to remove the faces you don't want and just print the one you want. This can be shades of green, orange, blue. Whatever you have !<figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/147901/2023-11-06_ilocgj3nfckh.jpg"></figure>&nbsp;Prusa variants features simple layer changes at certain layers. All pre sliced. Feel free to remove 2 faces you don't want and just print the one you like. The skirt around the print is there to wipe the nozzle ! The top is set to Hilbert curve pattern to give it a bit of texture but you can change that of course. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/147901/2023-11-06_bi6i3hs309o4.jpg"></figure>&nbsp;There's support required for the body. No need for the support in the hole and on the hands. The hole is there if you wish to use a skewer. There's also a base file if you want to have it free standing. <figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/147901/2023-11-06_kjkxng6ps7a4.jpg"></figure>Any questions just ask and happy printing ! 🍀🌿

Korok Low Poly (from Zelda BOTW)

Zelda

WagZPrintZ

A melted snowman.. you know the gig.. &nbsp;You'll need to heat the edges to give it that “melted” look! &nbsp;Scale to whatever size you wish, but keep thickness the same as original so it bends easier once heated!

Melted Frosty

Christmas

mcmaven

This is a 3D-printed model of a triple-axis tourbillon, which is based on the tourbillon in a Jacob and Co. Twin Turbo Furious watch. A tourbillon is a mechanism employed to counteract the effects of gravity within a watch. This intricate model includes an escape wheel, triple-axis outer frame, and a base with an integrated motor. It functions on the same fundamental principles as a traditional watch tourbillon.&nbsp;With precise assembly and calibration of the escape wheel, spring, and base drive gear, this tourbillon can smoothly rotate in three axes and maintain accurate timekeeping. The provided print settings in the Triple-axis Tourbillon Model for Kit-007.3mf file are already customized to ensure that all screw holes are clear and ready for assembly.&nbsp;Printed plastic ‘screws’ are printed to scale and used as caps to cover the steel screws that actually hold it together.<a target="_blank" href="https://youtu.be/2-7S2i6AUyM" rel="nofollow noopener">Here </a>is a real-time video of the tourbillion in action.&nbsp;Note: There are two different designs defined for the Tourbillon: the 3MF version and the STL version.&nbsp;The 3MF (Triple-axis Tourbillon Model for Kit-007.3mf file) version was designed specifically to work with Bambu printers and the Bambu slicer, and uses the Triple-axis Tourbillon Model Hardware Kit motor to drive it. It is a slightly modified version of the original STL tourbillon version. To build the 3MF version you only need to order the <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a>, which provides all the non-printed parts (screws, bearings, shafts cut to length, motor, etc.) needed to build a complete model. <a target="_blank" href="https://www.youtube.com/watch?v=HRNbihDXNwE" rel="nofollow noopener">Here </a>is a video of assembling the 3MF version with the Bambu 007 hardware kit. Note that some of the sections in the Furious Build Notes PDF file below also apply to assembling the 3MF version, with the primary difference being the construction and components of the Base and the drive mechanism.&nbsp;The STL (Raw Model Files) version is a set od files that was designed to work with any printer or slicer. It also uses a more complex Arduino controlled stepper motor mechanism to drive it. To build the STL version you can order a kit of all the non-printed parts <a target="_blank" href="https://www.makerrx.com/collections/projectkits/products/twin-turbo-furious-tourbillon-kit" rel="nofollow noopener">here</a>, otherwise you will need to order the parts listed in the Furious Build Notes PDF instructions individually. If you order the STL version of the hardware kit or buy the parts yourself, you will need to program the firmware into the Arduino before it will work. The Furious Build Notes PDF file below, describes the assembly process for the STL version. For some of the larger parts, ‘full’ (e.g., Base Outer Ring.STL) and ‘split’ versions (Base Outer Ring a.STL and Base Outer Ring b.STL) of the same part are included. The ‘full’ parts require at least a 220x220 bed for printing. The ‘split’ parts may be printed separately on a diagonal on a smaller bed, then glued together to form the larger part.&nbsp;The following filaments can be used to create a model that looks like the pictured gold, silver, copper and black version:<ul><li><a target="_blank" href="https://shrsl.com/4cim5" rel="nofollow noopener">PLA Silk Gold</a></li><li><a target="_blank" href="https://shrsl.com/4cim4" rel="nofollow noopener">PLA Silk Silver</a></li><li><a target="_blank" href="https://shrsl.com/4cim3" rel="nofollow noopener">PLA Silk Copper</a></li><li><a target="_blank" href="https://shrsl.com/4cim2" rel="nofollow noopener">PLA Basic Black</a></li></ul>Here is a video of the construction of the 007 kit. And some sections in the Furious Build Notes.PDF file may be useful for constructing the 007 kit.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=bHEU9rnnu88"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/bHEU9rnnu88" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Triple-axis Tourbillon Model Components Kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;The Hardware Kit for the Triple-axis Tourbillon Model for Kit-007.3mf file can be found here: <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a><a target="_blank" href="https://shrsl.com/4cfzj" rel="nofollow noopener">.</a>

TT Furious Tourbillon

Clock / Mechanical

planpa3d

This project turned out to be one of my favorite designs inspiring me to create multiple versions as well as another plant. I just simply love experimenting with different colors on the main head and head spots, as well as the stem and leaves.I included just the flower pot base in this free version, but have created other bases and a different version of the stem available here..<a href="https://cults3d.com/en/3d-model/art/piranha-plant-v2" rel="nofollow">https://cults3d.com/en/3d-model/art/piranha-plant-v2</a>Free Sunflower design here...<a href="https://www.thingiverse.com/thing:5426766" rel="nofollow">https://www.thingiverse.com/thing:5426766</a>Pea shooter design available here..<a href="https://cults3d.com/en/3d-model/game/pea-shooter-launcher-that-works-pla-n-pa" rel="nofollow">https://cults3d.com/en/3d-model/game/pea-shooter-launcher-that-works-pla-n-pa</a>****** Created a remix to add parts for the single extruder printers****** <a href="https://www.thingiverse.com/thing:5451481" rel="nofollow">https://www.thingiverse.com/thing:5451481</a>I tried to make most of this design able to print on your average single extruder printer, but unfortunately could not come up with an efficient way to print the head and the spots without a duel extruder, or IDX printer.The “Top Head” and “Top Head Spots” should be printed together, as well as the “Bottom Head” and “Bottom head Spots”.“Back Leaf Light Green” and “Back leaf Dark Green” should be printed together to complete half of the back leaf then mirrored in your slicer program to complete the 2nd half of the leaf. The same process will be necessary to complete the front leaf.Everything else should be self-explanatory, just align the flat spots of each part on the build plate. Most parts can be printed without supports, but a few will need them.Once everything is printed, I start assembling the model by attaching the tongue in the bottom head with some 3D gloop. Then the teeth should fall into place when they are aligned correctly.Letting the tongue and teeth set in the bottom head, I attach the head pins and remaining teeth in the top head.I then take time to attach the leaf halves together, by applying a small amount of gloop to one side and holding the respective mirrored side together.Setting the leaves aside to set up, I finish attaching the top and bottom head pieces together, and carefully apply gloop along the groove for the lips to be attached. You will notice the flat spot on the lips will line up with the bottom, or tongue part of the head.I then attach the two stem parts together. It helps to align the arrow on the bottom of the stem with the arrow on the black base and glue the stem to the base at roughly the same time.After leaving the stem set up in the base for a few minutes, It should be fine to dip the respected leaf ends in gloop and insert them into position on the stem.The stem and the head will need attached together next. Be sure to correctly align the top of the head upwards. I apply gloop to not only the stem heptagon, but to the cut out on the stem as well.Last I apply gloop to the diagonal part of the pot top and to the diagonal of the black bases bottom and attach the two together.You can follow me on instagram, <a href="https://www.instagram.com/pla.n.pa/" rel="nofollow">https://www.instagram.com/pla.n.pa/</a>to find out what I designs I am currently working onIf your interested in selling prints of my designs, become a Patreon supporter here… <a href="https://patreon.com/planpa3d" rel="nofollow">https://patreon.com/planpa3d</a>Thanks for checking out my design.Happy printing!!Category: Art

Piranha plant V1

Mario

Sevro

A bowl for candies and other sweets in shape of ghost.<figure class="media"><div data-oembed-url="https://youtu.be/buXmyCewa3k"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/buXmyCewa3k" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Candy Ghost

Halloween

crabstiks

A fridge magnet design based on Captain Americas shield from the marvel avengers movies. It needs 2 magnets 3mm diameter by 10mm length, these push in after the print, there's no need to pause it. The model is split into three objects to allow easy selection of colours in Bambu Studio

Captain America shield fridge magnet 

Comics / Marvel

nikola

<h3>Pixel Board</h3><figure class="image image_resized image-style-align-center" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_lon3dtlzddwb.jpg"></figure>&nbsp;Changes:&nbsp;2023-10-15: Fixed the case which had incosistent edge.&nbsp;___&nbsp;&nbsp;PixelBoard is, as the name implies, a board that you can put 3D printed small squares aka “pixels” in and use it as a decorative piece, the board is 24 pixels wide and 12 pixels tall. The compact overall design fits on pretty much every printer, including Prusa Mini. If you're wondering what kind of designs can be made with pixels and a board of this size, scroll down to the bottom for some design examples.I recently found a similar model to this, and I noticed it had a few design flaws - but due to its licensing which didn't allow any modifications (remixes), I couldn't make any improvements to it - so I made an entirely new project from scratch over the weekend, and you can remix, share, and adapt it in any way you want - STEP files are included as well!&nbsp;Since it's literally designed over the weekend and not used over a longer period, if you have any improvement suggestions, feel free to make a remix or to comment.&nbsp;It's designed from the ground up for FDM printing, no supports, or anything similar required. It makes (optional, but recommended) use of 6x3mm magnets to hold the board firmly in the case, and the case itself doubles as a storage - and can hold more than 4 times the number of pixels required to fill the entire board, all in 4 different compartments, so you don't have to search through piles of different pixels to find the color you want.&nbsp;I have printed all the files on my X1C using generic 0.2mm settings with different filaments I had lying around, but please before you print everything at once, see below for print instructions and fit test models.&nbsp;<h3>Required materials:</h3>&nbsp;<ul><li>Optional: four 6x3mm magnets. These will hold the board extremely well in place, so much so that I had to design a push pin to push the board from the back, this is ideal since the box doubles as storage, and you don't want to have 1000+ pins accidentally drop on the floor.</li><li>3D Printer with at least 165mm bed size width - Prusa Mini can fit and print this.</li></ul><h4> </h4><h4> </h4><h4>Parts and print settings</h4><h4> </h4><h4>Board</h4><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_79e71rpcqru4.jpg"></figure><h4> </h4>The board is printed using default settings of 0.2mm or lower, but there is no significant benefit of printing lower than 0.2. It requires no additional settings or anything else. Just make sure you're printing this with a dry filament to avoid any stringing which may lead to pixels not fitting quite well afterward.<h4>Pins</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_fx9bx521pug5.jpg"></figure>&nbsp;The Pins are all 5x5mm for the cube part, as the tolerances for this are built into the board directly, but the diameter of the cylinder part may vary from printer to printer, and based on what kind of fit you want. I've included the pins with the cylinder at the following diameters: 5.00mm, 4.98mm, 4.96mm, 4.94mm, 4.92mm, and 4.90mm. They all have the size in their name Pin500 is Pin with a diameter of 5.00mm, Pin492 with diameter of 4.92mm, and so on.You need 288 pins to fill the whole board, I've included files with 298 pins to have some spare. If your printer bed adhesion isn't that reliable, I'd recommend printing in smaller batches instead of everything at once.&nbsp;You can print these in 0.2mm layer heights as well. No brim is required, and if you use it then it might be difficult to remove afterward.So, how do you know which pin size to print?&nbsp;<h4>Fit Test Files</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_jjvpqn24uwh2.jpg"></figure>&nbsp;I've included a small 3x3 test board, print this, and all different pins and see which one fits best. If none of the pins fit, then you can, of course, use the scale feature of the slicer to adjust it, or modify the step files, but it means that your printer isn't quite accurate enough and this may lead to other issues as well. Use the same filament and same settings that you will use later on.For me personally, Pin498 fits the best.<h4>Case</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_qendaq3orl0u.jpg"></figure>&nbsp;The case requires no supports and is designed to be printed this way. You can use any layer height that you want. 0.2 layer height produces nice results, and especially with some sanding, can be pretty. There are no major structural demands here, other than the magnets that are held in place. &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_fwumhu5dey4w.png"></figure>Magnets/PushPin&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_7tw888ogds6s.jpg"></figure>If you decide to use magnets, you can put them in the side of the case, as well as the board, so they hold when the board is in place. There should be enough clearance to do a simple press fit for the magnets, bit if they keep falling out just add a drop of superglue.&nbsp;However, these magnets can be pretty strong, and getting the board out - when it's full of pins, can be very difficult, so I've designed a pin that goes from the front of the case to the back - make sure to put this in BEFORE you put the board in. The pins are pretty small, only 5 mm and barely noticeable, due to the small size, you'll need something to push them in from the back. If you don't want to deal with that, and you don't mind compromising on the design, there's also a long push pin version, this will stick out on the back 20mm and allow you to push it with your finger easily. Print both and try it out.The pins can be printed either way, and you don't need infill for them - 2 or 3 walls should do the trick.I printed mine in this orientation, so I get a smoother back-side finish. But this is up to you and how well your bed adhesion is. You can use brim on this to ensure it prints properly.<figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_wfahmznx9v0y.png"></figure>&nbsp;<h3>Assembly</h3>&nbsp;The assembly is pretty straightforward:&nbsp;<ul><li>Put the push pin in the case so you don't forget it.</li><li>Add magnets to the case and the board - make sure to orient them correctly</li><li>Done</li></ul>&nbsp;<h3>Design examples</h3>Besides the example image above, there are numerous designs that fit on a 24x12 board, here are some examples - and often you can even fit two of these on the board, or scale them down/up as you wish, as they don't use the entire space by themselves&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_kfdej6cryrvf.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_skdiiybul83w.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/96773/2023-09-22_pmm1qbz5sn0m.png"></figure>These screenshots come from <a target="_blank" href="https://www.brik.co/pages/gallery-search?q.size.height.min&q.size.height.max=12&q.size.width.max=24&q.size.width.min" rel="nofollow noopener">https://www.brik.co/pages/gallery-search?q.size.height.min&q.size.height.max=12&q.size.width.max=24&q.size.width.min</a>&nbsp;

Pixel Board

Toys

The Smoothy Mount is the official mount designed for use with the <a target="_blank" href="https://makerworld.com/en/models/18174" rel="nofollow noopener">Smoothy PTFE Bowden Y Connector</a>. The Smoothy allows you to use an external spool with your Bambu Lab machine without disconnecting your PTFE Bowden Tubes.&nbsp;The Smoothy can happily rest inline without a mount which has some advantages, but some users have requested a mounting method so I'm delivering for you!&nbsp;The Smoothy Mount features a universal mounting design so it can be used with either an M3x8mm screw or magnets.&nbsp;Having the mount separate allows for easy removal of the Smoothy without removing fasteners like screws, etc.&nbsp;I've designed a couple images with placement ideas but the location and method is up to you.&nbsp;The screw mount is most secure, while the magnets allow for more flexible placement. On the X1C, the screw hole closest to the outside edge of the machine works best.&nbsp;Several magnet sizes are now supported for flexibility (see files). The magnets need to be fairly strong. If you don't have strong magnets, I recommend the screw mounting method.&nbsp;The Smoothy Mount is compatible with Smoothy models that have flanges at both ends, which includes:<ul><li>Smoothy V2 PC4-M6</li><li>Smoothy V2 PC4-M10</li><li>Smoothy V1 PC4-M10</li></ul>If you have a Smoothy V1 M6 with no flange, simply upgrade to a Smoothy V2 and you'll be good to go!<h2>FEATURING:</h2><ul><li>No Supports</li><li>No Brims</li><li>No Overhangs</li></ul><h2>NOTES:</h2>I printed all tests successfully with the following:<ul><li>Nozzle: 0.4mm</li><li>Layer Height: 0.2mm</li><li>Walls: 4+</li><li>Infill: Gyroid</li><li>Brims: Disabled</li><li>Supports: Disabled</li><li>Orientation: Vertical, wide side down</li><li>Glue Stick: Yes</li><li>Bambu Lab X1C</li><li>Cool Plate</li></ul><h2>UPDATES:</h2><ul><li>Support for several new magnet sizes has been added!</li></ul>The Smoothy can be used commercially, but can't be resold.&nbsp;Enjoy!&nbsp;Download The Smoothy PTFE Bowden Y Connecter here: <a target="_blank" href="https://makerworld.com/en/models/18174" rel="nofollow noopener">https://makerworld.com/en/models/18174</a>

The Smoothy Mount - For The Smoothy Y Splitter

3D Printing Accesories 

This is my take on the Morrigan Class Patrol Destroyer from the MCRN. It is done to scale to my Rocinante model. The model is once again kit so no glue needed. It has two features: Retractable PDCs - the same as on the Roci. Retractable Air Bridge - the same as on the Roci, only shorter. It also comes with its own stand. I recommend to watch the folloving video for easier assembly. <figure class="media"><div data-oembed-url="https://youtu.be/aZs08p-ZCKo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/aZs08p-ZCKo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Morrigan Class from the Expanse

TV Show

nrdaeger

&nbsp;Four position driver bit attachment for Dewalt drill driver. Designed to be snapped onto the rear grills on the back of the Dewalt 20v Max XR drill driver. I created this after I purchased this drill and found no location to store different driver bits. Wanted something sturdy, yet removable to allow for future design improvements. This is the first revision, and I plan on making improvements after the attachment gets more real-world exposure.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/user/2318862772/draft/2023-09-24_619gmf0cu2w2.jpg" alt="image"> DeWALT 20v Max XR driver bit attachment

Drill Driver Bit Attachment

Tools

Scattered Collectables

Printable oversize pokemon cardsCharizard, blastoise and venusaur print in two pieces, the center and the border. The other two will need a colour swap to get the border the correct colour.They look great with the details paintedModelled in Fusion360

Pokemon Cards

Pokemon

Encrust3d

Horizon Forbidden West Aloy and spear hueforge. Change colors to your liking.