Overlord

3DMakeryDE

My contribution to valentines day :)&nbsp;If you want to help me out/support my work, please consider rating the print profile. Unfortunatly there is an unjustified bad reating. This profile was already used over 40 times and works!Thank you!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/530183/2024-01-31_1cfc1c8d801af.jpeg" alt="Spooks Blank Template - Imgflip"></figure>&nbsp;

Skeleton heart hands gesture

Love 

filippo3Ddesign

Stitch made in 2d, to have a very simple print and a fantastic object!! Happy printing!

Stitch 2D art

Disney

DesignCraft

DISCLAIMERS: <ul><li>Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.</li><li>This model may not fit all ELEGOO cardboard spools. Please review the photos and spool measurements before printing.</li></ul>Description:&nbsp;This adapter system wraps the edges of an ELEGOO 1kg 199x64mm cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Features:<ul><li>Reusable</li><li>ELEGOO nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Measure your spool first to ensure it matches the specified dimensions</li><li>Print this model twice for a single spool</li><li>Affix one spool ring adapter on each side of the ELEGOO spool</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

ELEGOO Bambu Lab AMS Cardboard Spool Adapter Ring

Papp Filament 

jpbruce

<h3>BambuLab X1Carbon Piggybank</h3>This is a 80x80mm (WxL) piggy bank that is modeled after the BambuLab X1Carbon CoreXY 3D Printer. This is about a 1:5 scale down from the original printer.The slot at the top fits any coin (and I guess bill) in circulation, and the coins can be removed either through the working door or the screw-out-bottom.&nbsp;<h4>Printing</h4>This model consists of multiple parts, best printed in these colours:<ul><li>Multicolour:<ul><li>The main body of the printer with the logo on both sides. Alternatively, a version of the body without the text but with cutouts for the logo on both sides is provided for separate printing. In this case, the body is grey and the logo (printed 2 times) is black. In any case, the main body needs to be printed with supports for the top of the doorframe, but make sure to place support blockers covering the threads of the bottom hole!</li><li>The door of the printer with the handle attached. This multicolour print can be done with a single colour change, but you can also print the two parts separately (door in black, handle in silver). If printed as one, you will need supports to help with the handle.</li></ul></li><li>Grey:<ul><li>The screw insert for the bottom hole (make sure to print without supports).</li></ul></li><li>Black:<ul><li>The lid of the printer with the slot.</li><li>The screen-insert.</li></ul></li></ul>Printing this is model is best on a printer with multi-colour capabilities, and assembled STEP-files of the main body and door are provided for this use. A coloured BambuStudio file is also provided for multicolour printing.&nbsp;Alternatively, all single parts are provided as STL-files and all need to be printed once (except for the logo which needs to be printed twice). A BambuStudio file with all necessary parts is also provided for this. Please note that this STL-Version does not have the “BambuLab” text under the logo, as both printing and assembly of this would not be possible.<h4>Update 20.01.2024:</h4>I've created an alternative lid for this model that has the AMS standing ontop of the printer. You can find it <a target="_blank" href="https://makerworld.com/en/models/149219#profileId-162792" rel="nofollow noopener">here</a>.<h4>Assembly</h4>Assembling this model consists of only a few steps, and at most a bit of glue is required:<ol><li>Remove all supports from the main body.</li><li>Push the lid into the cutout for it, this should work as a friction-fit.</li><li>Glue the screen into place in the cutout for it.</li><li>If you printed the logo separately, install it now. This should also work as a friction fit and you might need to trim a bit of material from the edges of the logo parts, depending on your printer and material.</li><li>Install the door into the frame. The hinge consists of the two protruding bumps on the left side, which fit into depressions in the frame. The radius on one edge needs to be at the front of the model for you to be able to open the door. The easiest way to install this is to place the bottom bump in its hole, and then jam the door into the frame coming from the right, as you can see in the image below. You then need to hold the top of the door laterally to keep it on the frame as you push it left, towards the depression. There will be a larger resistance just before the depression, and it should snap in once you pass a certain point. Warning: this process may dent the Frame a little bit, but this is not harmful to usage of the model. This is why I reccomend doing this process on the top of the door, you will see the dents less on that side.</li></ol><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/490531/2023-11-19_7f8nulgspwtt.jpeg"></figure><h4> </h4><h4>Miscellaneous</h4>I printed this model in black & white instead of black & grey, as I don't have grey on hand right now. This still looks good so don't sweat it if you don't have the perfect colours ready. :)

Love

Disney

Papp Filament

alles mögliche