Ouikanfly

TripleGWorkshop

My theory is this is a better funnel that will splash less and flow faster. Please prove me wrong. Scale to desired size.<figure class="image image_resized" style="width:82.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/283049/2023-11-09_97xtjsybwj7u.jpg"></figure>&nbsp;&nbsp;

Vortex Funnels - No Supports

trucs utiles

Makerspace.Online

A 3D printable Businesscard embosser, can be assembled without any hardware, everything just snaps together. I designed this businesscard embosser to be modular and 3D printable without using any support and without any hardware required to assemble. The tollerances are tight. And some materials work better then others. I have had best results using Basic PLA. Available patterns:3 Rollers available, more patterns can be found on <a target="_blank" href="https://makerworld.com/en/u/2755972568" rel="nofollow noopener">my makerworld page!</a> - Confetti - ZigZag - Polkadot Follow me on <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">my instagram</a> for updates on new patterns and uploads! Assembly:  (Pro tip: use some lubrication grease / vaseline around the gears for a better working!!) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_cca5dc6403a79.png"> Make sure to allight the bottom gears maked with the dot and allign with the stipe.  Do not forget to add some lubrication / grease between and underneath the gears! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_d2c9531e7e588.png"> For the top gears some marks are present as well to allign the gears properly! Also here! Do not forget to add some lubrication / grease between and underneath the gears!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_2b0339c954b2b.png"> Note:  This design is licensed under a <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons Attribution-Noncommercial-Share Alike</a> Please do not sell this file or printed product. <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">Instagram:</a> <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener"><img class="image_resized" style="width: 8.56%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/a1ec037c-99fb-4f6f-9216-f4866257bed3.png" alt="Instagram, logo, social, social media icon - Free download"></a>

Business Card Embosser - Level up your cards! 

chouette 

michelem

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-04-23_b4afa61493a71.png"></figure>A VERSATILE EVERYDAY COMPANION&nbsp;Imagine having a versatile tool that effortlessly fits into your pocket, ready to tackle an array of tasks.&nbsp;Meet the SmartBits – a compact marvel that seamlessly combines multiple functions in a sleek design.&nbsp;This tool serves as both a screwdriver and a bit holder, providing easy access to 8 different bits for various applications.&nbsp;Activating the tool is a breeze – a simple slide on the exposed bar causes the bits to extend from the opposite end. The magnet effortlessly guides them back into position. Never forget it open.&nbsp;Thanks to the additional embedded magnets, each bit is securely held in place, ensuring they remain steadfast whether you&#39;re on the move or storing the SmartBits in your pocket.&nbsp;It&#39;s the ideal companion for your everyday needs, effortlessly blending convenience and functionality.&nbsp;Print Instructions:&nbsp;Support is required for both the Base and the Slider. Please verify the 3mf file with Bambu Studio if there&#39;s any uncertainty.&nbsp;Place the Slider with the magnet holes on the build plate and add regular support.&nbsp;Position the Base with the side opening on the build plate and add regular support.&nbsp;There is an alternative version of the base with flat bottom you can print with it on the build plate, but it requires support too.&nbsp;No support is needed for the Button and Lid.&nbsp;I recommend printing everything with a minimum resolution of 0.16mm.&nbsp;Bill of Materials (BOM):&nbsp;You&#39;ll need some magnets and a few screws:<ul><li>12 magnets, 5 or 6mm x 2mm</li><li>4 screws, M3 Socket Head, 8mm</li></ul>Assembly Instructions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-15_7862deb2dfe4.png"></figure>Start with the base and insert 2 magnets into the two rectangular holes; no glue is required there.&nbsp;Next, with a bit of glue, add 1 magnet to the Base in the slider housing. Be cautious, as this magnet is the only one that needs attention to its side, opposite to the one you put in the center hole of the slider (to be attracted).&nbsp;Now, take the Slider and glue 9 magnets on the bottom holes; again, the center one must have the same side as the magnet you put in the base slider housing.&nbsp;Insert the slider into the base, add the lid, and tighten the lid screws.&nbsp;Finally, attach the button to the slider with the last screw.&nbsp;If the slider doesn&#39;t return to its position, slightly loosen the screws.&nbsp;If you want I added also a cord endcap to be printed, look at the pictures, insert the paracord or similar in the bottom hole of the Endcap_Base make one simple knot on both ends, finally close it with the Endcap_Lid.&nbsp;Also, take a look at the <a target="_blank" href="https://makerworld.com/en/models/134027" rel="nofollow noopener">Magnetic Pocket Screwdriver</a> I crafted.&nbsp;Hope you like it!&nbsp;(Got inspired by the Bit Bar by Big Design)&nbsp;Check out my other magnetic tools for your office:&nbsp;<figure class="table" style="width: 94.97%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="text-align: center"><figure class="image image_resized" style="width: 49.2%"><a href="https://makerworld.com/en/models/146614" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-23_b0f041b578fc2.png"></a></figure></td><td style="text-align: center"><figure class="image image_resized" style="width: 50.26%"><a href="https://makerworld.com/en/models/143760" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-23_bf112a67f1d5b.png"></a></figure></td></tr></tbody></table></figure><ul><li><a target="_blank" href="https://makerworld.com/en/models/146614" rel="nofollow noopener">The magnetic cable clips</a></li><li><a target="_blank" href="https://makerworld.com/en/models/143760" rel="nofollow noopener">The magnetic ScrewGuard</a></li></ul>

SmartBits - Magnetic screwdriver bits holder

outillage

zymes_dk

Homemade organizer for my 3d-printing tools. Printed in PLA, .4 nozzle, .2 mm layer height.

Tool organizer

etabli

brody.bolanos

Bambu Lab P1P Printable Cable Drag ChainI created a printable cable chain for the p1p as not everyone has access to the cable chain from Amazon that I linked in my other design <a target="_blank" href="https://makerworld.com/en/models/23653" rel="nofollow noopener">https://makerworld.com/en/models/23653</a> . There were a few things that I wanted to meet or exceed from the store bought design including a reduction in sagging and lighter weight. <ul><li>Chain has a minimum bending radius of 18mm, making sure the wire doesn't get over bent.</li><li>When fully extended ( side with the latches face down) the chain has a slight curve, meaning it wont lay completely flat. This is intentional to make sure the chain wont accidently bend the opposite way.</li><li>Each of my links weigh 1.963g and the cable chain links from amazon weigh 2.160g. </li><li>Below you can see the difference in sagging with the chains fully extended.</li></ul>Please use <a target="_blank" href="https://makerworld.com/en/models/23653" rel="nofollow noopener">https://makerworld.com/en/models/23653</a> for the rest of the instructions and print files for the complete assembly. &nbsp;This is a 3d printed chain with a lot of moving parts, overtime tolerances will loosen and it will start to wear down. I haven't had any issues so far but the Amazon chain is still a better option overall when it comes to durability and smoothness. <figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_j3urpsw5m7fl.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_0djvy4hh02bh.jpg"></figure><blockquote><h3>Files</h3></blockquote>Main Files<ol><li>Chain Link Latch</li><li>Chain Link Latch PTFE Clip</li><li>Chain Link 0.0</li></ol>Alternative Files<ol><li>Chain Link -0.02</li><li>Chain Link +0.02</li></ol>Print Files<ol><li>Printable Cable Drag Chain Assembly</li><li>Printable Cable Drag Chain Test Print</li></ol><blockquote><h3>Parts/BOM</h3></blockquote><ul><li>22 Chain Link Latch</li><li>22 Chain Link 0.0</li><li>1-3 Chain Link Latch PTFE Clip ( I used one on the 11th link)</li></ul><blockquote><h3>Print Orientation</h3></blockquote><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_dwzfge3tu4g9.png"></figure><ul><li>The PLA/+ printing preset for cooling uses the Aux fan, I don't know how much it effects the print as the fan blows from one side but I kept all the male sides of the links facing towards the fan. </li></ul><blockquote><h3>Print Setting</h3></blockquote>Filament Tested - eSun PLA+, Bambu Tough, Polylite PLA Pro (dried and kept around 20%RH). DO NOT USE PLA, IT WILL BREAK<ul><li>See print file</li></ul>Supports<ul><li>None</li></ul><blockquote><h3>Before You Print</h3></blockquote>In the Files section you might have seen two alternatives Chain Link Files.<ol><li>Chain Link Final -0.02</li><li>Chain Link Final +0.02</li></ol>These alternative files change the hole sizing slightly in the cable links. 0.0 worked perfectly when using PLA + but when I switched over to PETG I had to tighten the tolerances, making the hole smaller, hence the +0.02 file. Alternatively, -0.02 will expand the hole . More under “Assembly” below.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_2n9xykfuj8sc.png"></figure><blockquote><h3>PETG Note</h3></blockquote><ul><li>It seems like a hit or miss with PETG, as a small percentage of users couldn't get good prints ( including me). If you are having issues with the tolerances being too lose please comment or message me and I will send you + 0.03/0.04 files. </li></ul><blockquote><h3>Assembly</h3></blockquote><ul><li>Print Printable Cable Drag Chain Test Print</li><li>Once you've printed the test file, press the matching links into place, in total 3 small chains consisting of (0,0,0) (+.02,+.02,+.02) (-.02,-.02,-.02) . It's kind of hard but a little easier if you slide the links together along the chamfer on each cylinder. </li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_g6fawy05urym.png"></figure><ul><li>Next snap the latches into place</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_11ru8ghqjsnh.png"></figure><ul><li>What you're looking for initially is a snug fit, after rotating the pieces back and forth a handful of times they'll loosen up and you should be able to figure out which sizing is correct. There should be very little movement (almost none) when wiggling the links in any other direction other then rotating. If you have PLA + I would suggest doing the test print in that ( pla should work fine for this but the pieces will definitely break ) reasoning being I know PLA + gives a good fit and even you you want to print in something else, it'll help you get a good idea of how it should feel. </li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_a9kvyeohlog5.jpg"></figure><ul><li>Once you've figured this out, use the file Printable Cable Drag Chain Assembly ( which is sized at 0.0) to print out 22 links, 22 latches, and 1 PTFE latch ( or more ). Or use another sizing!</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_qxbgr6led8o5.png"></figure><h3> </h3><h3>Make sure to recalibrate after the chain is installed. </h3>&nbsp;<blockquote><h3>Tips</h3></blockquote><ul><li>I only used 21 latches including the PTFE latch, I forwent the first latch on the link (the side closest to the frame) </li><li>To remove the latches, insert a small flat head screwdriver and twist. </li></ul><h4>Be careful where you place the PTFE clips, one in the middle is enough. Additional locations can cause the PTFE tube to put unwanted force on the chain.</h4>&nbsp;<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_jdfxwg6vkfon.jpg"></figure><h3>Please use <a target="_blank" href="https://makerworld.com/en/models/23653" rel="nofollow noopener">https://makerworld.com/en/models/23653</a> for the rest of the instructions and print files for the complete assembly. </h3>&nbsp;If you like my designs and want to say thanks, you can buy me a coffee and help fund the filaments I need for prototyping. A donation of any amount to <a target="_blank" href="https://www.buymeacoffee.com/brodyB" rel="nofollow noopener">Buy Me a Coffee</a> or <a target="_blank" href="https://paypal.me/brodyb10?country.x=US&locale.x=en_US" rel="nofollow noopener">PayPal</a> would be greatly appreciated!&nbsp;<h3>As always, given different printing environments, filaments, etc., prints may not work perfectly for everyone. If you are having issues please message or comment and I will try my best to resolve the issue.</h3>

trucs utiles

chouette

outillage

etabli

imprimante