Oneshotblu

StrifeXPrints

The Joker (Ledger Version) Hue Forge. &nbsp;For 0.4mm nozzle Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Sunlu Purple Transmission Distance: 1.4 PLA Sunlu Matte Green Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #4 (0.56mm) swap to Purple At layer #6 (0.72mm) swap to Green At layer #10 (1.04mm) swap to Jade White for the rest.

Joker (Ledger) Hue Forge

Marvel & DC

Terminatordeux

This is a rework of a 3d scan of the Virgin Mary a seen in Lourdes.Reworked a little.very cool in pop colors.A nice touch of grace in a cool deco.Printed in adaptative layers to be fast but very precise on the hand and face.Fast and economical without slicing on the quality

Holy Virgin Mary 3d scan of real statue reworked and poped in colors

Action figures e miniature

JirkaKral

What we know about Egypt&#39;s ancient civilization comes from what was left behind. Archaeologists scour the region for remnants to piece together pictures of the past, but some clues are hard to miss: at six and a half million ton, taller than the Statue of Liberty, and as wide as 10 football fields, the Great Pyramid of Giza can be seen from space.

Pyramid of Giza

Luoghi e monumenti

The Crafty Maker

Introducing my very first sponsored project. When Bambu Lab released their new translucent PETG filament I've reached out to them with an idea that have been thinking about for a while now, a model that resembles a stained glass window. Their translucent filament is a perfect fit for this.&nbsp;I was pleasantly surprised that they agreed and liked the project idea, so they sent me a batch of translucent PETG filament to get things started. &nbsp;There were a lot of ideas to choose from, but the space shuttle stuck with me, since I'm a big space nerd, so that was an obvious choice for me.&nbsp;Designing it was quite challenging because the color of the translucent filament varies on the thickness of the part. It took quite some test printing to get the best color and transparency, but eventually I was able to find the right balance and finished up the model.&nbsp;The filaments I've used are all Bambu Lab filaments. The parts that resemble the stained glass are printed in Translucent PETG Light Blue, Orange, Brown and Grey. Only the white parts are printed in a PETG that's not part of the translucent filament line. Those are printed in Basic PETG Transparent.&nbsp;The front and back frame are both printed in Basic PETG Black. All the other parts are all printed in Basic PLA. The box, lid and led panel or led strip holder are printed in the color black, the diffuser is printed in the color white.&nbsp;The box and the lid have little compartments where you can glue in magnets (width 6mm & height 3mm) but this is optional and not needed to keep the lid on the box.&nbsp;Print Settings&nbsp;Stained glass pieces<ul><li>100% infill</li><li>Top surface pattern: Octogram Spiral</li></ul>Front & Back Frame<ul><li>Arachne wall generator or detect thin walls</li></ul>Backlight Led Panel Holder<ul><li>Regular support on build plate only</li></ul>Backlight Led Strip Holder<ul><li>Outer brim recommended</li></ul>Diffuser<ul><li>100% infill</li><li>Outer brim recommended</li></ul>Box & Lid<ul><li>Outer wall speed 90 for consistent surface finish</li><li>Seam position: Back</li></ul>&nbsp;For the light source I've used following Bambu Lab products&nbsp;EU Store<ul><li><a target="_blank" href="https://eu.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes" rel="nofollow noopener">Led panel</a></li><li><a target="_blank" href="https://eu.store.bambulab.com/en-be/products/s-shape-led-strip-light-ws2812b-rgb" rel="nofollow noopener">Led strip</a> </li></ul>US Store<ul><li><a target="_blank" href="https://us.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes" rel="nofollow noopener">Led panel</a></li><li><a target="_blank" href="https://us.store.bambulab.com/products/s-shape-led-strip-light-ws2812b-rgb" rel="nofollow noopener">Led strip</a></li></ul>ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Space Shuttle Stained Glass Lightbox

Litofanie e Hueforge

JS DESIGN

Part of my DJI mini 3 / 4 Accessory uploads,This is smaller sticks that help flying only with thumbs and allow for storage without removing the control stick&nbsp;See my other DJI accessories here:<a target="_blank" href="https://makerworld.com/en/@JSDESING" rel="nofollow noopener">JS DESIGN | Published - MakerWorld</a>

DJI RC, THUMB CONTROL STICKS 

Drone

Lofted Goods

A mid century modern vase.&nbsp;No supports needed. Easy print. Can be scaled up or down however you like.&nbsp;Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: <a target="_blank" href="https://hendricks.design/links/" rel="nofollow noopener">https://hendricks.design/links/ </a>

MCM Vase

Home decor

joescalon

<img src="https://makerworld.bblmw.com/makerworld/draft/234463/2023-12-03_0e9d188a30855.gif">Gift box from Tiktok. There are many models of this but all of them require screws and less popular magnet sizes. I edited this model in CAD to support pins made from filament and 6mmx2mm neodymium magnets, which seemed to be the most popular on Amazon. Also included a remix of a part to fully seal the box up without magnets and another model that is just a stand.&nbsp;Included print profiles for an A1 mini.&nbsp;Print a total of 6 sides, 3 with or without magnets and 3 curved sides.&nbsp;Next measure, cut, and make “filament pins”, these will be glued in place.<img src="https://makerworld.bblmw.com/makerworld/draft/234463/2023-12-03_1e62ccca98243.jpg"> <img src="https://makerworld.bblmw.com/makerworld/draft/234463/2023-12-03_53c577a5ea975.jpeg">&nbsp;Put a magnet side and a curved side together lining up the small and large holes, like the first image below.The small holes are on the sides and barely fit 1.75mm filament, glue should be lightly applied here.Push pin all the way through both parts into the glue then move the curved side to make sure it moves freely.Continue until all sides are attached, like the images below, all the holes for the magnets should come together.<img src="https://makerworld.bblmw.com/makerworld/draft/234463/2023-12-03_01e47399c5c2d.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/234463/2023-12-03_c57b97946f1f9.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/234463/2023-12-03_bf6fb86676f9b.jpg">&nbsp;The 6th and final pin can only be glued in place when the box is completely closed. After that check that everythingmoves freely and if anything is too loose the head of the pin can be melted a little bit and pushed in more, don't melt it toomuch or it will stick to the part.&nbsp;Finally fill the 6 holes with magnets, test that the magnets are oriented the right direction and a drop of glue will hold them.&nbsp;The two types of stands are optional for a gift box with magnets but would be needed for a box without magnets to keep it closed.&nbsp;Enjoy and feel free to keep remixing this cool gift box design.&nbsp;

Gift Box Kinetic

Marty

JDJDJD

<h2>Meet the Smoothy!</h2>The Smoothy is a PTFE Bowden Tube Y Connector designed for smooth filament transport without catching or binding. This allows you to use an external spool with your Bambu Lab machine without disconnecting your PTFE Bowden Tubes.&nbsp;PTFE tubes are inserted deep into the connector for less wear on the FDM material. This allows for silky smooth operation.&nbsp;As the filament progresses towards the output, it passes through a precisely-designed taper that mates perfectly with the output bowden tube.&nbsp;All PTFE tubes must be inserted until each “stop” is reached (see cutaway diagram).&nbsp;Connectors must be the black type (not blue). The black connectors allow the PTFE tube to “pass thru” which is required for the design to work smoothly: <a target="_blank" href="https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1</a>&nbsp;<h2>BENEFITS:</h2><ul><li>No Supports</li><li>No Overhangs</li><li>No Brims</li><li>Optimized Geometry</li><li>Designed for FDM Printing</li><li>Smooth Operation</li><li>Supports both PC4-M6 and PC4-M10 “pass thru“ connectors</li><li>Free to Download!</li></ul><h2>UPDATES:</h2><ul><li>The Smoothy Mount is now available! Download here: <a target="_blank" href="https://makerworld.com/en/models/18190" rel="nofollow noopener">https://makerworld.com/en/models/18190</a> The mount is not required, but available to those who prefer to attach the Smoothy to their machines. Without the mount, it can simply rest in-line.</li><li>Both PC4-M6 and PC4-M10 connectors are now supported.</li></ul><h2>TIPS:</h2><ul><li>Make sure ALL bowden tubes are FULLY inserted until each one reaches its stop point. See cutaway diagram for an illustration.</li><li>The output tube does not insert as deep as the input tubes.</li><li>After inserting each tube, you can rotate the tubes back and forth while pressing inward slightly to make sure they&#39;re seated squarely and fully.</li><li>Glue Stick is recommended.</li><li>PTFE tubes must be cut squarely at the tip (no angled tips).</li><li>All PC4 connectors must be installed for a completed design with smooth operation.</li><li>Tested with a 0.4mm Nozzle and 0.2mm Layer Height.</li><li>Print vertically with wide dual-port side on the bed.</li><li>PC4 connectors typically have tapered threads. As such, make sure you don&#39;t over-tighten them as they can create a “wedge effect” and can cause damage.</li></ul><h2>NOTES:</h2><ul><li>These work well printed in PLA. More durable materials can be used, but it may require clearance adjustments.</li><li>I’m currently using this for my Bambu Lab X1C with an AMS, which utilizes an external spool.</li><li>This is the first model that I&#39;m sharing, I hope you enjoy it!</li><li>The Smoothy can be used commercially, but can&#39;t be resold.</li></ul>

The Smoothy - Y Splitter Connector

Tools

planes01

<h3>Overview</h3>“Darkstar” airplane kit card&nbsp;Check out the <a target="_blank" href="https://makerworld.com/en/models/199176" rel="nofollow noopener">SR-71</a>, <a target="_blank" href="https://makerworld.com/en/models/242106" rel="nofollow noopener">B-52</a>, <a target="_blank" href="https://makerworld.com/en/models/436445" rel="nofollow noopener">A-10</a>, <a target="_blank" href="https://makerworld.com/en/models/402126" rel="nofollow noopener">787</a>, and <a target="_blank" href="https://makerworld.com/en/models/405459" rel="nofollow noopener">Darkstar</a>!Check out the full airplane kit card collection → <a target="_blank" href="https://makerworld.com/@planes01/collections/991821" rel="nofollow noopener">linked here</a>!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000405459/design/2024-03-31_42146a92dd6e3.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000405459/design/2024-03-31_d42a941fb4303.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000405459/design/2024-03-31_efb9a9a6f46e3.png"></figure><h3> </h3><h3>Profiles</h3><ul><li>Kit With Frame<ul><li>plane in a kit card format ideal for gifting to others</li></ul></li><li>Kit No Frame<ul><li>plane without a kit frame ideal for assembly right off the printer</li></ul></li></ul><h3>Filament</h3>As shown in 3D print:<ul><li>Bambu Lab PLA Black</li><li>Inland PLA Gray</li><li>eSun PLA Fire Engine Red</li></ul><h3>Tips</h3><ul><li>Model requires close tolerances to ensure snug but not tight or loose fit<ul><li>Make sure the model cools to room temperature before assembly</li><li>Ensure filament is properly calibrated with no excessive over extrusion</li></ul></li><li>Ensure good bed adhesion<ul><li>Make sure printer is fully calibrated</li><li>Make sure print bed is clean &amp; dry (soapy water is my favorite for cleaning - simple &amp; works)</li><li>Make sure filament is dry (wet filament can generate non-continuous flow that can cause bed adhesion issues)</li><li>Cooling &amp; Temps - make sure they are correct for your printer, build plate, and filament</li></ul></li></ul><h3>Assembly</h3><ul><li>Remove all pieces from the kit</li><li>Debur as needed to smooth edges</li><li>Insert connectors into fuselage<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000405459/design/2024-03-31_56c97f1b73147.jpg"></li></ul></li><li>Insert engines onto connectors<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000405459/design/2024-03-31_63ae6d7dfba3.jpg"></li></ul></li><li>Insert vertical tail onto fuselage<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000405459/design/2024-03-31_e0d35e3210f35.jpg"></li></ul></li><li>Place airplane onto stand<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000405459/design/2024-03-31_ea2f5715a7e5f.jpg"></li></ul></li><li>Enjoy!</li></ul>&nbsp;&nbsp;

Darkstar Kit Card

Veicoli

3DP RNS

[3DP RNS] Headless V1.0 (3D Printed Robot)<ul><li>Series : 4 Legs / Animaloid Type [<a target="_blank" href="https://youtube.com/shorts/7H5wkBNzwhY?feature=share" rel="nofollow noopener">Youtube Video</a>]</li><li>This Is an all at once print. Assembly not required :)</li><li>If you subscribe to the YouTube channel [<a target="_blank" href="https://bit.ly/2KC3Tdx" rel="nofollow noopener">3DP RNS</a>], ★ a new robot will be revealed.</li><li>Thank you for your subscribing! It means a lot to me :)</li><li>Commercial License [<a target="_blank" href="https://www.patreon.com/3DPRNS" rel="nofollow noopener">Patreon</a>]</li></ul>&nbsp;※ Notice For my uploaded robot model to enable all joints to move, it&#39;s advisable to use a Brim.  If removing Brim is inconvenient or challenging, I don&#39;t recommend printing it.  Also, joint functionality may vary depending on the printer and filament you use. I hope your print is successful and you can have a robot with well-functioning joints.<figure class="media"><oembed url="https://www.youtube.com/shorts/7H5wkBNzwhY"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Cubrick &amp; Cube Case V1.0 (3D Printed Robot)<ul><li>Series : 4 Legs / 4-Legged Spider Type</li><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-cubrick-100906643?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Cubrick &amp; Cube Case V1.0 Download [Patreon]</a></li><li>Cubrick &amp; Cube Case V1.0 can be obtained through Patreon (Hero) membership.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/q0NL_I6283k"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Optronic V1.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-optronic-103196500?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_fan&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Optronic V1.0 Download [Patreon]</a></li><li>Optronic V1.0 can be obtained through Patreon (Hero) membership.</li><li>This robot is equipped with a camera on the front of its head, which has various features such as infrared and thermal imaging.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/8-6pLwAEBuQ"></oembed></figure>

[3DP RNS] Headless_V1.0

Robot

Powerpill.prints

&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-04-22_3bed3bc303c32.png">This pack has been all set up for super simple and easy printing with the AMS or AMS lite!All the models are set to 4 Colours! Just load your filament, slice and go!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed these keychains, please consider boosting to support the creator. Thank you!</boostcontent></boostme>Most keychains take between 45 minutes to 1.5h to print!<h3>This Pac-man Keychain &amp; Magnet pack includes the following Characters: Magnets: Pac-man Powerpill, Pac-man Thumbs up, Ms. Pac-man Modern, Ms. Pac-man Retro, and Pac-man Family. Keychains: Inky, Blinky, Pinky, Clyde in pixel art, Modern and 80&#39;s Retro artwork! Pac-man Championship Edition, Pac-man Logo, and pixel art Pac-man!</h3>Check out My other Video Game Keychain Packs here:<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/136252#profileId-148211" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-05-17_1b51dac6130d8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/136252#profileId-148211" rel="nofollow noopener">Super Mario Bros. 3 Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/162397#profileId-178258" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-05-17_3888685c1d948.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/162397#profileId-178258" rel="nofollow noopener">Kirby Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/197958#profileId-218564" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-05-17_231c0706c647e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/197958#profileId-218564" rel="nofollow noopener">Nintendo Classics Keychain Pack</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/442832#profileId-348820" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-05-17_6d105be145fb8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/442832#profileId-348820" rel="nofollow noopener">Pac-Man Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/399835#profileId-301320" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-05-17_8201d7f9605df.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/399835#profileId-301320" rel="nofollow noopener">Yoshi Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/128878#profileId-139600" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-05-17_7b7272f64e966.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/128878#profileId-139600" rel="nofollow noopener">Undertale Keychain &amp; Wall Art Pack</a></td></tr></tbody></table></figure>All models have been test printed on the A1 Mini with the AMS Lite!  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-04-22_e4d1dcc9a2118.png">I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there&#39;s one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, you can modify the size of the “Keychain hole” object in BambuStudio to make it a little larger, or take a small drill bit and drill the final keychain to make it a little bigger!&nbsp;I purchased my <a target="_blank" href="https://www.amazon.ca/gp/product/B07DC9YZXV/" rel="nofollow noopener">keychain set from Amazon</a> if you&#39;d like to get something similar! The 8mm x 2mm magnets I used can be <a target="_blank" href="https://www.amazon.ca/dp/B096ZSWJ23?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">bought on Amazon</a> as well!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-04-22_afce9cb03bfd6.png">All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-04-22_39ca5602857f.gif"></figure>I made some changes to the first layer and first layer infill speeds, reducing them both by about half. This increases the print time for the first layer, but increases the bed adhesion and print quality a bit. If you find that the first layer is printing too slow for your liking, feel free to reset them both back to default settings in the speed tab.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-01-15_c5fc221922c1c.webp"></figure>If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn&#39;t think the increased print time was really worth the extra quality. It&#39;s definitely noticeable, but I didn&#39;t think the tradeoff was there. Feel free to experiment and try it yourself!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-04-22_dd0c27c75975a.png">Adding the magnets is easy! Buy some 8x2mm magnets from Amazon, along with some glue (I&#39;m using Gorilla Glue Gel). Drop a small amount of the glue into the holes, and insert the magnets ensuring they&#39;re facing the same direction so you don&#39;t have a polarity flip between the two :D&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-03-20_738b1b37b9c.gif"></figure>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-04-22_e6a016c30b69b.png">Want to remove the keychain ring or hole? No problem! Each keychain has a “Keychain hole” or “Keychain Outer Ring/Keychain Inner Hole” object on each plate. Just select them, delete it, and re-slice! Same thing with the Magnet hole! Just delete that objects if you don&#39;t want them there.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-04-22_4118c81753043.gif"></figure>Want to scale these up really large to make some wall art? Just delete the “Keychain hole” or “Magnet Hole” object, then scale the X and Y axis to fit your print bed. Keep the Z-Scale back to 3.0mm so you&#39;re not printing extra layers though!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-04-22_6965d5b5d3691.gif"></figure>If you notice any settings that could be changed or improved, please let me know! I&#39;d love to make any adjustments necessary so they all print great! If there&#39;s any other packs or characters you want to see, leave a comment! Like this pack? Check out my other Pokemon keychain packs here:  <figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/121800#profileId-131121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-02-07_dc330ce646168.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/121800#profileId-131121" rel="nofollow noopener">Pokemon Keychain Pack #1</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/144042#profileId-156624" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-02-07_0a2962a7126e5.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">Pokemon Keychain Pack #2</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/172935#profileId-189959" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-02-07_358b5b8be1e3a.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/172935#profileId-189959" rel="nofollow noopener">Pokemon Keychain Pack #3</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/177083#profileId-194702" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-02-26_3bc2fc5b971f6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/177083#profileId-194702" rel="nofollow noopener">Pokemon Keychain Pack #4</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/213311#profileId-232885" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-02-29_2d186746f8aae.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/213311#profileId-232885" rel="nofollow noopener">Pokemon Keychain Pack #5</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/234438#profileId-250977" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-03-04_2b0f305261921.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/234438#profileId-250977" rel="nofollow noopener">Pokemon Keychain Pack #6</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/253647#profileId-270086" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-06-18_c11965538aa41.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/253647#profileId-270086" rel="nofollow noopener">Pokemon Keychain Pack #7</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/472759#profileId-382643" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-06-18_7037cee7c2094.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/472759#profileId-382643" rel="nofollow noopener">Pokemon Keychain Pack #8</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/503298#profileId-418741" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442832/design/2024-06-18_ee2dfb693b7bd.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/503298#profileId-418741" rel="nofollow noopener">Pokemon Keychain Pack #9</a></td></tr></tbody></table></figure>

Pac-Man Keychain & Magnet Pack!

Gadget

warrell72

Embark on a journey to a galaxy far, far away with this coaster inspired by those available from Oga's Cantina on Batuu Star Wars: Galaxy's Edge – the perfect companion for your favorite drinks! Whether you lean towards the light or embrace the dark side.&nbsp;OverviewThis set of six coasters is inspired by those available at Oga's Cantina on Batuu in Star Wars: Galaxy's Edge at both Disney World and Disneyland California. This core set of six can be printed alongside a limited edition set of four designs, which are no longer available in the parks, and complemented by the coaster display stand. Both other models are available in my <a target="_blank" href="https://makerworld.com/en/u/2029960715" rel="nofollow noopener">profile</a>.&nbsp;Parts count: 6&nbsp;Key Features<ul><li>Inspired by the iconic Oga's Cantina at Star Wars Galaxy's Edge.</li><li>Dimensions: 100mm in diameter, 4mm thick.</li><li>4 color prints.</li><li>Pre-sliced.</li><li>Tuned print profiles.</li><li>Provision to add no-slip feet to the back.</li></ul>Printing Details&nbsp;Recommended filaments: - eSun PLA+ Cold White - eSun PLA+ Black - eSun PLA+ Bone White - eSun PLA+ Fire Engine Red&nbsp;Hotend: 0.4mm Hardened SteelPrint time: Each coaster typically prints in about 45-75 minutes&nbsp;Printing Tips:<ul><li>Most coasters share the same four colors: White, Black, Dark Red/Maroon, and Tan.</li><li>The Cantina Code coaster uses Light and Dark Purple, as well as Tan.</li><li>The Star Liner coaster uses Grey and White.</li><li>Printing with an AMS is necessary for optimal results.</li><li>The print profiles automatically assign colors to the coasters. Before printing, ensure that you've placed your filament in the corresponding slots of the AMS according to the 3MF file.</li><li>Ensure your print surface is impeccably clean before printing a coaster, especially for those with predominantly dark colors on the face. Otherwise, any dirt, residue, or filament wisps may become embedded in the print. Consequently, I do not recommend using glue.</li><li>Due to the intricate details in the Bloody Rancor design, the colors and design elements do not load properly on the prepare screen when viewed from underneath. However, once the design is sliced, the colors become visible in the preview and will print without any issues. Please refer to the screenshots below for clarification.</li></ul><figure class="image image_resized" style="width:15.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/471368/2024-01-30_335f4c80444f6.webp"><figcaption>Prepare Screen</figcaption></figure><figure class="image image_resized" style="width:14.81%;"><img src="https://makerworld.bblmw.com/makerworld/draft/471368/2024-01-30_0fe13665b1b2c.webp"><figcaption>Preview - After Slicing</figcaption></figure>&nbsp;AssemblyAdded to the files is a jig which helps with even placement of non-slip Silicone Pads (6 x 2mm). Which can be purchased on <a target="_blank" href="https://www.amazon.co.uk/Silicone-Adhesive-Protector-Transparent-Furniture/dp/B0BJDKRDTQ/ref=sr_1_3?crid=1U16NOKJI68AU&keywords=runner%2Bfurniture%2Bdots&qid=1706609474&sprefix=runner%2Bfurtinature%2Bdots%2Caps%2C65&sr=8-3&th=1" rel="nofollow noopener">Amazon</a>&nbsp;<figure class="image image_resized" style="width:35.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/471368/2024-01-30_f344669d0a448.jpg"><figcaption>Place the Jig on top of the coaster, the tolerances is tight so should snap on.</figcaption></figure><figure class="image image_resized" style="width:35.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/471368/2024-01-30_e4736b26990f3.jpg"><figcaption>Add the self adhesive silicon pads through the holes.</figcaption></figure><figure class="image image_resized" style="width:35.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/471368/2024-01-30_f472bcda81d26.jpg"><figcaption>Remove jig, your coaster are now non-slip and safe for your drinks.</figcaption></figure>May your libations be as legendary as the tales told in the Outer Rim. May the Force be with you!

Oga's Cantina - Core set of 6 Star Wars: Galaxy's Edge Coasters

Starwars

cruizincris2006

Light box designed to hold typical LED strip lights found at most retailers.

Star Trek Lightbox

Startrek

RCalin

Beautifull wall Moon lamp. It is already cut in 4, i print it on my k1 max 3d printer due to big build plate with total diameter of 540mm, you need to have the 3d printer be in a good skew setup in order to match all 4 parts together nicely.It has a channel where the wires can hide behind.Printed at 20 %infill, 3 walls, i had also ironing on, i think it should work without also.It needs support active on all 4 parts because in the middle of the moon is a cubic cut space for cables. If printed in one piece it should work without supports. It can be resized to match any printer. When resizing, i recommend to resize only x and y, not z, it is made for a max of 10mm width led strip. If you want any small modifications contact me and i will do it for you for free. Package contains 5 stls, and one 3mf file (4 stls with moon cut in 4, one stl in one piece) In the photos i had a 24v led band, the light is a little too much, but with led bands with controls it will look awesome with a little less light.I put it on the wall with double sided tape. For any questions write me a message, thanks!