Oliver Ernster

AcmeArt

Free commercial use &nbsp;Comes pre painted for multi color use!&nbsp;This is a highly detailed (death and beauty) Roses and Skull sculpter! , Highly detailed but easy to process on any pc!!Best with around 10% supports and 14% gyroid infill.The lower your layer height the more detail you get!&nbsp;Thank you so much for your interest in my model.

Death and Beauty Roses Skull COMMERCIAL USE

Skulls

Kaleb08

Supports requiredFor a bambu lab print profile<a href="https://makerworld.com/en/@kaleb08" rel="nofollow">https://makerworld.com/en/@kaleb08</a>print in petg

Articulated rocket

SciFi

Dr Operator

This is a multi part print that I designed before I bought my Bambu, and I will be uploading an all-in-one version in the future as well.&nbsp;&nbsp;I initially started out making a set of print-in-place tank treads and it ended up as a print-in-place axles/frame/rims so I ran with it and designed a Mystery Machine around them. The rims allow for a hubcap to be attached but they don't need one to function. This was also my first time using TPU for tires and I designed them to slide over the bump on the rims. All assembly photos show the rims for TPU tires.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/2c8e0156-7fc8-4250-8b67-baaa7a1f01c0/thumbs/cover/800x238/png/image.webp"></figure>&nbsp;&nbsp;&nbsp;I have also included a set of “regular” axles if you want to print the tires in something other than TPU. These axles don't have the bump on the rims and the tires just slide right on.&nbsp;<figure class="image image_resized" style="width:64.82%;"><img src="https://media.printables.com/media/prints/517710/rich_content/a257838c-95b4-4ae7-9ace-2da3a083daf1/thumbs/cover/800x478/png/image.webp"></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;PRINTING:<ul><li>Everything was printed in PLA except for the tires. They are TPU.</li><li>There are two sets of axles. One for use with TPU tires and one for use with PLA/PETG tires.</li><li>Panels.stl will require a filament change from Green to Orange.</li><li>If you see [x2] or [x4] in the name of a part, then you'll need to print that amount of the part.</li></ul>&nbsp;ASSEMBLY:&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/0ef1c27d-d155-407d-ad62-fd0dd0439d7b/thumbs/cover/800x534/png/image.webp"></figure>&nbsp;&nbsp;The first thing I would suggest doing is to attach all of the flowers and door handles to each corresponding plate/hubcap. I used glue to secure all flowers and handles, even if the fit was nice and snug.  Tire Flower.stl fits into Front Plate.stl as seen below.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/6b8a930e-8b1f-4da7-92e7-f5b2b00c44da/thumbs/cover/800x225/png/image.webp"></figure>&nbsp;&nbsp;Next, take Right Plate.stl, Back Right Flower.stl, Front Right Flower.stl and Right Door Handle.stl. Attach all as seen in the pictures below. Repeat the steps for the left side and put them off to the side for now.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/199f1cb4-d0f8-43f7-873b-dc71bdd7b6b3/thumbs/cover/800x516/png/image.webp"></figure>&nbsp;&nbsp;Hubcap Flower [x4].stl fits into Hubcap [x4].stl as seen below.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/f4557b53-ade1-4bb6-ae5b-33d6ad64640c/thumbs/cover/800x288/png/image.webp"></figure>&nbsp;&nbsp;Once the glue has dried on your hubcaps, grab the tires and rim/axle assembly. I would suggest putting the tires on the rims first and then fit the hubcaps on as seen below.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/3d0d3c11-46a2-45d0-87cc-b27fdb72a670/thumbs/cover/800x176/png/image.webp"></figure>&nbsp;&nbsp;Next, take Body.stl and attach the windows and windshield as seen below. Again, even though the windows fit nice and snug for me, I used a spot of glue to keep them in place.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/f034381d-2346-4b16-aae0-25f93f41a0ea/thumbs/cover/800x252/png/image.webp"></figure>&nbsp;&nbsp;Next, take Headlights [x2].stl and Fog Lights [x2].stl and attach them to the body.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/8a567fad-cdb9-426d-b941-a564e4de65cf/thumbs/cover/800x277/png/image.webp"></figure>&nbsp;&nbsp;And then the Tail Lights [x4].stl as seen below.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/6a383dc5-3e01-4dc4-a49f-754cc81ecc97/thumbs/cover/800x244/png/image.webp"></figure>&nbsp;&nbsp;Rack [x2].stl fits into the top of Body.stl as seen below. These are one of the only things that I didn't end up gluing.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/d51f28ff-5776-4743-b737-8b57169b3440/thumbs/cover/800x399/png/image.webp"></figure>&nbsp;&nbsp;The bumpers fit onto the body via a dovetail joint. They only fit on one way so it should be easy enough.<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/e29a5521-dbdc-425b-a796-68ebd9bd6ef2/thumbs/cover/800x214/png/image.webp"></figure>&nbsp;&nbsp;Next, you can snap the completed wheel assembly into place. It doesn't matter which way you attach the wheel assembly, there is no front, back, top or bottom to it and it will attach to the body any way.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/c3fb4c02-b91f-4e65-9b3e-f7edd7a6ef0e/thumbs/cover/800x354/png/image.webp"></figure>&nbsp;&nbsp;Once you have the wheels on, grab the Back, Front, Left and Right Plates and attach them as seen below. Again, I would suggest using glue to secure, even though the fit is snug.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/8c176302-a376-4cd8-94e9-70b6251bb97f/thumbs/cover/800x224/png/image.webp"></figure>&nbsp;&nbsp;Then attach your panels.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/31741957-c36e-4c63-b12b-92246987ff66/thumbs/cover/800x292/png/image.webp"></figure>&nbsp;&nbsp;Lastly, attach the door handles to the back of the body and the mirrors to the front.  <figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/3c134905-aa19-4ce9-9fc9-f2144a25d2c6/thumbs/cover/800x236/png/image.webp"></figure>&nbsp;&nbsp;And that's it, you're done. Thanks for reading and happy printing.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/517710/rich_content/1bd13046-6154-4f3a-8b15-1541e99edb5e/thumbs/cover/800x586/png/image.webp"></figure>

Mystery Machine

Toys

Check out Spider-Man 13 head https://makerworld.com/en/models/398853#profileId-300388&nbsp;Infill-25%

Dummy 13 Deadpool

Figurines

lindnjoe

Christmas Ornament Door corner to hang in the corner of the door frame.

Christmas Ornament Door Corner

Xmas

mcmaven

This is a 3D-printed model of a triple-axis tourbillon, which is based on the tourbillon in a Jacob and Co. Twin Turbo Furious watch. A tourbillon is a mechanism employed to counteract the effects of gravity within a watch. This intricate model includes an escape wheel, triple-axis outer frame, and a base with an integrated motor. It functions on the same fundamental principles as a traditional watch tourbillon.&nbsp;With precise assembly and calibration of the escape wheel, spring, and base drive gear, this tourbillon can smoothly rotate in three axes and maintain accurate timekeeping. The provided print settings in the Triple-axis Tourbillon Model for Kit-007.3mf file are already customized to ensure that all screw holes are clear and ready for assembly.&nbsp;Printed plastic ‘screws’ are printed to scale and used as caps to cover the steel screws that actually hold it together.<a target="_blank" href="https://youtu.be/2-7S2i6AUyM" rel="nofollow noopener">Here </a>is a real-time video of the tourbillion in action.&nbsp;Note: There are two different designs defined for the Tourbillon: the 3MF version and the STL version.&nbsp;The 3MF (Triple-axis Tourbillon Model for Kit-007.3mf file) version was designed specifically to work with Bambu printers and the Bambu slicer, and uses the Triple-axis Tourbillon Model Hardware Kit motor to drive it. It is a slightly modified version of the original STL tourbillon version. To build the 3MF version you only need to order the <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a>, which provides all the non-printed parts (screws, bearings, shafts cut to length, motor, etc.) needed to build a complete model. <a target="_blank" href="https://www.youtube.com/watch?v=HRNbihDXNwE" rel="nofollow noopener">Here </a>is a video of assembling the 3MF version with the Bambu 007 hardware kit. Note that some of the sections in the Furious Build Notes PDF file below also apply to assembling the 3MF version, with the primary difference being the construction and components of the Base and the drive mechanism.&nbsp;The STL (Raw Model Files) version is a set od files that was designed to work with any printer or slicer. It also uses a more complex Arduino controlled stepper motor mechanism to drive it. To build the STL version you can order a kit of all the non-printed parts <a target="_blank" href="https://www.makerrx.com/collections/projectkits/products/twin-turbo-furious-tourbillon-kit" rel="nofollow noopener">here</a>, otherwise you will need to order the parts listed in the Furious Build Notes PDF instructions individually. If you order the STL version of the hardware kit or buy the parts yourself, you will need to program the firmware into the Arduino before it will work. The Furious Build Notes PDF file below, describes the assembly process for the STL version. For some of the larger parts, ‘full’ (e.g., Base Outer Ring.STL) and ‘split’ versions (Base Outer Ring a.STL and Base Outer Ring b.STL) of the same part are included. The ‘full’ parts require at least a 220x220 bed for printing. The ‘split’ parts may be printed separately on a diagonal on a smaller bed, then glued together to form the larger part.&nbsp;The following filaments can be used to create a model that looks like the pictured gold, silver, copper and black version:<ul><li><a target="_blank" href="https://shrsl.com/4cim5" rel="nofollow noopener">PLA Silk Gold</a></li><li><a target="_blank" href="https://shrsl.com/4cim4" rel="nofollow noopener">PLA Silk Silver</a></li><li><a target="_blank" href="https://shrsl.com/4cim3" rel="nofollow noopener">PLA Silk Copper</a></li><li><a target="_blank" href="https://shrsl.com/4cim2" rel="nofollow noopener">PLA Basic Black</a></li></ul>Here is a video of the construction of the 007 kit. And some sections in the Furious Build Notes.PDF file may be useful for constructing the 007 kit.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=bHEU9rnnu88"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/bHEU9rnnu88" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Triple-axis Tourbillon Model Components Kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;The Hardware Kit for the Triple-axis Tourbillon Model for Kit-007.3mf file can be found here: <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a><a target="_blank" href="https://shrsl.com/4cfzj" rel="nofollow noopener">.</a>

TT Furious Tourbillon

Complex

davidkelly021

hi this is my short-tailed fridge magnet lizard my son loves to through it at the fridge :) &nbsp;HOLES FOR TWO 6X3 MAGNETS

magnet flexi lizard

Animals

3dprinting4silvas

I have seen some cool ties online. Mine is heavily remixed version of: <a target="_blank" href="https://www.printables.com/model/135298-printable-flexi-necktie" rel="nofollow noopener">https://www.printables.com/model/135298-printable-flexi-necktie</a> I wanted something that fit me perfectly(measurements are taken from fabric tie on me) and it took a lot of work to modify the file to where it is now (likely due to my lack of experience with the tools). I love how it turned out. I feel like the tie is an expression of my love for 3d printing and a great conversation piece.The tie slips on over the top button on the shirt so no neck band is needed. The hinges use 1.75mm filament in the holes to link the tie together. It also has a built in clip on the back side to keep the tie in place on your shirt. I sanded the design on the tie to make it stand out but you could also just as easily swap out filament during the print to make some amazing color combos. I also thought that removing the top layers of the print to expose the infill would be super cool.I am excited to keep playing with this and find fun ways make new designs. I can't wait to see what others might do with this as well. Please post some makes!&nbsp;9/24/2023 updated Knot

My first 3d printed Necktie

Wearables

Robnob9

Portal 2 is probably my favourite game ever. These bookends work great for books or game/movie cases.Print the 2 parts of the figure in black.Print one portal in orange and then one portal in blue.Print the stands in white.The stand and figure can be done in a lower quality since there is no detail however the portals look best at a very fine quality due to the rippling of them.To assemble, line up the portal with the stand and then push fit one half of the figure into the gap. They should clip together but you may want to put a spot of glue on also.I came across this model several years ago, amended it slightly but the original was deleted a long time ago. This was the best one though so unable to credit the original creator.

Portal Bookends for books / games / blu rays etc

Household

SlowEvo

Update 10/26: Updated models available. There are profiles for multicolor and single color. The biggest change is embossed text which will look much better when printed. Read profile details for more info. I strongly suggest you print the updated model.&nbsp;Put on display infill patterns! Looks cool too says my wife!&nbsp;<a target="_blank" href="https://makerworld.com/en/models/37162#profileId-35568" rel="nofollow noopener">Check out v2 here!</a>&nbsp;I wanted to display infill options so that I can more easily visualize and feel the strength. A big reason for making this was to show my friend who only used cubic, I wanted to show him he had a plethora of options.&nbsp;Blocks are 30x30x8.6. Since the first outer wall is a different color from the infill and there's a small gap, the infill is 29.1x29.1. I originally wanted it to be only infill with no outer wall but I was having difficulty and I like the way it came out like this so I didn't try to tweak anymore.&nbsp;You'll see in the 3mf for the modifiers..<ul><li>Wall loops - 0</li><li>Top shell layers - 0</li><li>Sparse infill density - 15%-20%</li><li>Sparse infill pattern - different for each block</li></ul>I had to leave a tiny gap in between the outer wall that surrounds the infill blocks so that I was able to paint them.&nbsp;Total model size: 133x166.8x10&nbsp;Note: Infill patterns missing are adaptive cubic and lightning*. 1. because adaptive cubic can't really be shown with this 2. lightning infill I believe is (usually) the least practical infill 3. I wanted it wanted to be symmetrical. Also, Octagram Spiral and Archimedean Chords aren't really shown properly since they aren't in the center of the model**.*The updated models contain lightning infill. It replaced Support Cubic since it looks too similar to Cubic in this model.** The updated model is rearranged to have Octagram Spiral in the center.&nbsp;*.f3d and STEP are included in case you'd like to add to them or remix in any way.*Unfortunately due to profile farmers starting to download, change negligible things in the model and uploading them as remixes(often without stating what was changed) I have taken down STEP and f3d files. If you would like these files you may message me and we can figure out a way for me to send them to you. Unfortunately the minority of people ruin it for everyone. I know this won't stop it but it's a deterrence. For now, I still have the license allowing remixes. I'll change the license if necessary. I apologize I had to do this.

Infill Display

Printer

CrazyCoolPrints3D

This is an X1C Desktop Organizer. It was made to organize anything you want. A structured insert is coming soon. This doesn’t need an AMS! It can be printed with layer changes for multi-color. A P1S / P1P version is on the way! This model can also be sized up. Patreon (For Commercial Licenses To Sell And More Models): <a target="_blank" href="https://www.patreon.com/user?u=80724611" rel="nofollow noopener">https://www.patreon.com/user?u=80724611</a> &nbsp;Step By Step Process:<ol><li>Print the parts (made to work with or without the AMS).</li><li>Slide the parts in the order shown in the assembly file (glue shouldn’t be needed).</li><li>Slide the insert in, multiple versions will be available but currently there is only an empty one.</li></ol>&nbsp;Different Versions:P1S Version: <a target="_blank" href="https://makerworld.com/en/models/14742#profileId-14556" rel="nofollow noopener">https://makerworld.com/en/models/14742#profileId-14556</a>P1P Version: <a target="_blank" href="https://makerworld.com/en/models/26072#profileId-22450" rel="nofollow noopener">https://makerworld.com/en/models/26072#profileId-22450</a>&nbsp;Update Log:(9/12/23): Released&nbsp;(Please report any issues to my discord: coaster fan#4551)