Oliver

Gabb.99

This is a lightweight version of an 200x200 mm IKEA SKADIS panel. It requires only about 70-80g of material.&nbsp;&nbsp;<blockquote>If you like my work and you want to support me to do better, you can buy me a coffe at the following links <a target="_blank" href="https://buymeacoffee.com/GSprint" rel="nofollow noopener">https://buymeacoffee.com/GSprint</a> <figure class="image image_resized image-style-side" style="width:16.72%;"><a href="https://buymeacoffee.com/GSprint" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000058396/design/2024-05-03_858db37117022.png"></a></figure><a target="_blank" href="https://ko-fi.com/gsprint" rel="nofollow noopener">https://ko-fi.com/gsprint</a> </blockquote>

Light Weight 200x200 SKADIS IKEA

Skadis

GlennovitS 3D

If you have a multicolor-printer generating lots of poop/purge/waste - then use some of it with this game! It’s is made to have fun with your Bambulab poops - enjoy!The rules are simple: don’t drop the poop - but the game is hard to master.. Try it!<h2>Overview</h2><figure class="image image_resized image-style-side" style="width:33.66%;"><img src="https://makerworld.bblmw.com/makerworld/draft/848836/2024-04-09_3dc21f8bb099d8.jpeg"></figure>The game is all 3D-printed and consists of the following pieces:<ul><li>Tower<ul><li>Tower base</li><li>Tower extension 1</li><li>Tower extension 2</li><li>Tower extension 3</li><li>Tower top</li></ul></li><li>Beams (lots of them!..)</li></ul><figure class="image image_resized image-style-side" style="width:33.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/848836/2024-04-09_09804551f88ea.jpeg"></figure><h2>Assembly</h2>The Tower should be easily assembled - snaps together - and when not in use, it can be taken apart to save some space.<h2>Rules (Original)</h2><figure class="image image_resized image-style-side" style="width:33.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/848836/2024-04-09_043e0ee995cc88.jpeg"></figure>Setup for a round:<ol><li>When the Tower is assembled, insert 4 beams in one of the top rows of the tower</li><li>Then you each take turn placing 1 Beam in the Tower until they are all placed (how many you want, is up to you - maybe start with a total of 20-30)</li><li>Fill purge/poop into the top of the tower - and then you are ready!</li></ol>The game:<figure class="image image_resized image-style-side" style="width:33.21%;"><img src="https://makerworld.bblmw.com/makerworld/draft/848836/2024-04-09_d2cfc322d62b18.jpeg"></figure><ol><li>In turn, carefully pull 1 Beam out of the Tower (must be in a section/extension that contains poop!).</li><li>When a single purge/poop drops out at the bottom of the Tower in your turn - you loose the game/round!</li></ol><h2>Rules (Balanced)</h2>Setup for a round: <ol><li>Do like Original rules above.</li></ol>The game:<ol><li>In turn, carefully pull 1 Beam out of the Tower.</li><li>If purge/poop drops out of the Tower in your turn, collect it. </li><li>When all purge/poop is collected by players, the winner is the one with the most/least purge/poop (you choose!)</li></ol><figure class="image image_resized image-style-side" style="width:33.21%;"><img src="https://makerworld.bblmw.com/makerworld/draft/848836/2024-04-09_2ef8208d7f216.jpeg"></figure>Note: this is an all new game - if you have suggestions on improving the rules or the model, please leave a comment or contact me directly!Warning: as in Jenga, every fast move or careless shaking with the table can ruin your chances of winning - so be careful!<h2>Print instructions</h2>All parts should be fairly easy to print. But here is a few tips:<ul><li>Brim: Maybe. It can help with bed adhession on the tower parts. Not needed on the Beams!</li><li>Supports: NO supports needed</li><li>Multicolor: The tower extensions can be imported into the slicer and Split into parts, to easily color the different segments.</li></ul><h2>Want to show your support?</h2>You can see ALL my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>&nbsp;Happy printing!

Poop Tower Game (purge escape - jenga style)

Spiele

geo.luki

PTFE tube coupling for mounting on A1 mini using PC4 M10 pneumatic connectors. You can also look at my other accessories for BambuLab printers. <a target="_blank" href="https://makerworld.com/en/models/508393" rel="nofollow noopener">Ultralight honeycomb/full hotend cover A1 series</a> <a target="_blank" href="https://makerworld.com/en/models/503843" rel="nofollow noopener">Ultralight honeycomb/full poop deflector A1 series</a> <a target="_blank" href="https://makerworld.com/en/models/434104" rel="nofollow noopener">Z axis dust cover TPU (P1/X1 series)</a> <a target="_blank" href="https://makerworld.com/en/models/438396" rel="nofollow noopener">Ultrathin handle cover P1/X1 series (0.2 nozzle)</a> <a target="_blank" href="https://makerworld.com/en/models/395248" rel="nofollow noopener">Bambulab silicone sock hotend P1/X1 series</a> <a target="_blank" href="https://makerworld.com/en/models/384903" rel="nofollow noopener">AMS feeder PTFE adapter TPU</a> <a target="_blank" href="https://makerworld.com/en/models/122760" rel="nofollow noopener">PinSpool holder v3 for Honeycomb riser</a> <a target="_blank" href="https://makerworld.com/en/models/133302" rel="nofollow noopener">Bambulab P1/X1 nozzle wiper</a> <a target="_blank" href="https://makerworld.com/en/models/62411" rel="nofollow noopener">LED light riser P1/X1</a>

A1 mini PTFE coupling PC4 M10

3D Drucker

dubios

Use a layer height of 0.16 mm. Still fitting problems? → See &#34;Troubleshooting&#34; section below.&nbsp;A purge deflector on which you can slide different baskets to save space - this is the mini pms (purge management system) - print it on one plate without support, 0.16mm layer height in about an hour.&nbsp;Basket(s) locks into place when pushed in and you can reduce vibration sounds with the printable TPU mats, a piece of fabric or a piece of rubber (scroll down for more information).<h2>Standard mini pms</h2><ul><li>Upgradeable with different baskets (standard basket, deeper standard basket, XL basket, XXL basket, Monster basket, Thinner standard basket): <a target="_blank" href="https://makerworld.com/en/models/160727" rel="nofollow noopener">Baskets</a></li><li>If you know right away you don&#39;t want the standard basket use a “Standard purge deflector” and choose your basket (<a target="_blank" href="https://makerworld.com/en/models/160727" rel="nofollow noopener">baskets</a>).</li><li>Stronger basket lock version available, read “stronger basket lock” section in the “Troubleshooting” section below, before printing.</li><li>“Troubleshooting (versions) for the standard edition” available, section below.</li><li>Carefully selected and extensively tested dimensions: Walls are designed, that they are match the 0,16mmx2 Wall thickness with a small infill cap (1mm-4*0,16mm). This makes the basket slightly flexible, stable and lightweight. Also, the standard basket is intentionally close to the print bed so that the small strips that get caught on the nozzle also fall into the basket. The distance has been tested extensively (everyday day use, A1 mini) so that the basket does not come too close to the print bed and even if the basket bends slightly there is still enough clearance. </li></ul><h2><a target="_blank" href="https://makerworld.com/en/models/168981#profileId-185597" rel="nofollow noopener">Lightweight mini pms</a></h2><ul><li>Smaller and thinner than the &#34;Standard mini pms&#34; so it is printable in under an hour.</li><li>A little bit wobbly but still a full mini pms.</li><li>Stronger basket lock version available.</li><li>Link: <a target="_blank" href="https://makerworld.com/en/models/168981#profileId-185597" rel="nofollow noopener">https://makerworld.com/en/models/168981#profileId-185597</a></li></ul><h2><a target="_blank" href="https://makerworld.com/en/models/164085#profileId-180108" rel="nofollow noopener">Just a purge deflector with this design</a></h2><ul><li>Link: <a target="_blank" href="https://makerworld.com/en/models/164085#profileId-180108" rel="nofollow noopener">https://makerworld.com/en/models/164085#profileId-180108</a></li></ul><h2><a target="_blank" href="https://makerworld.com/en/models/375011#profileId-274943" rel="nofollow noopener">A basket that fits under the mini pms</a></h2><ul><li>Link: <a target="_blank" href="https://makerworld.com/en/models/375011#profileId-274943" rel="nofollow noopener">https://makerworld.com/en/models/375011#profileId-274943</a></li></ul><h2>How to print:</h2>If you are not printing this with a print profile: print without support, tolerances are designed for a layer height of 0.16mm and PLA, but other layer heights and filaments could also work.&nbsp;<h2>Vibration noise information</h2>You can use a printable TPU mat, a piece of rubber, folded paper or fabric to reduce vibration noise from the poop in the basket, I used some adhesive strips under the piece to attach it. When printing with specific sideways movements, a vibrating noise can occur when the poop lightly touches the side wall. This is least likely to happen with a rubber or TPU base, alternatively the wall can also be covered with the aforementioned pieces.<h3>How to print TPU mats and TPU inserts with walls:</h3><ul><li>You can use the provided print profile or edit your own</li><li>0.16mm layer hight than edit the strength section:<ul><li>6 Walls (you can play with that, one loop should be 0.16mm wide)</li><li>0 (zero) Top shell layers</li><li>6 bottom shell layers (you can play with that, one layer is 0.16mm high, so 6 layers are 0.96mm high)</li><li>Sparse infill density 10% Honeycomb (you can play with both settings, maybe 15% Gyroid with only 4 bottom shell layers is more silent)</li></ul></li></ul>&nbsp;<h2>Troubleshooting (versions) for the standard edition:</h2>Have you used a layer height other than 0.16 mm? Then this may be the reason, but you may be able to find a solution below without reprinting<h4>Sits your container too tight on the purge deflector or doesn&#39;t slide on?</h4><ul><li>Then you can simply grind the small bar on the purge deflector or, of course, print one of the following versions.</li></ul><figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000131754/design/2024-01-29_66cfe5a866825.jpeg"></figure><h4>Stronger basket lock standard purge deflector</h4><ul><li>Use this deflector version if the basket doesn&#39;t snaps into place with a light click.</li><li>I used it for PLA-Matte filament from eSun.</li></ul><h4>More tolerance standard purge deflector</h4><ul><li>Use this if a basket for the standard mini pms doesn&#39;t fit. This version has more tolerance at the slider (thinner and the lock bar is also thinner).</li><li>In all my tests, I did not have to use this version (I used BambuLab PLA, eSun PLA mat, generic PLA and PETG). So consider checking your layer height again (0.16 mm), try drying the filament and recalibrating your filament before using this version.</li></ul><h4>Thinner standard basket - for Standard mini pms</h4><ul><li>It can occur that the standard basket is too close to the print plate (A1 mini), mostly to a wrong layer height.</li><li>This version is slightly thinner to fix this problem if it is not the layer height.</li></ul><h4>Other problem? Just leave a comment so I can take a look at it.</h4>&nbsp;<blockquote>Looking for cool other things to print? Check out my Magic Bookshelf! <a target="_blank" href="https://makerworld.com/en/models/147616#profileId-161046" rel="nofollow noopener">https://makerworld.com/en/models/147616#profileId-161046</a></blockquote><blockquote>If you like my work, please feel free to support it with a small tip, I can never have enough filament and good coffee to help me with prototyping: <a target="_blank" href="https://www.buymeacoffee.com/dubios" rel="nofollow noopener">https://www.buymeacoffee.com/dubios</a> or <a target="_blank" href="https://ko-fi.com/dubios" rel="nofollow noopener">https://ko-fi.com/dubios</a></blockquote><blockquote>Check out my other models!: <a target="_blank" href="https://makerworld.com/en/u/2166054501" rel="nofollow noopener">https://makerworld.com/en/u/2166054501</a></blockquote><blockquote>Update 06.04.24<ul><li>added TPU inserts with walls</li></ul>Update 28.02.24<ul><li>added a step file for remixing the baskets (remixing means major changes, not just adding a logo, have fun!)</li></ul>Update 02.02.24<ul><li>The dubios lettering has been removed from the front and is now on the inside.</li></ul>Update (01.02.24)<ul><li>New design to meet the new community guidelines.</li><li>The chamfer at the bottom of the baskets has been removed to minimize rare print problems.</li><li>BIG BOY basket has been removed - use L or XL basket.</li><li>Minor fixes on the L (deeper standard) basket and XXL basket.</li><li>The lightweight edition has been updated with the new purge deflector design (still thinner) and the basket has been updated (like the thinner standard basket, but for the lightweight rinse deflector).</li><li>Added TPU mats for the Thinner standard basket and lightweight basket.</li></ul>Update (28.01.24)<ul><li>The purge deflector connection to the printer is now a lot more stable tahn the old version to work well with the new baskets.</li><li>Purge deflector design update (rounded corners) and little details.</li><li>New baskets versions for the standard pms available, for a better overview, these have been published as remixes.</li></ul>Update 27.01.2024:<ul><li>Vibration damping mats that you can print with TPU are now available for the standard basket and the BIGBOY basket (see instructions before printing).</li><li>All purge deflectors for Standard mini pms sitting now more stable on the purge wiper than the old version.</li><li>The BIG BOY basket is slightly smaller at the back, which has solved a problem when used on the A1 mini.</li><li>The stronger basket lock for special Filaments - purge deflector for Standard mini pms is now suitable for most PLA-Matte filaments without grinding.<ul><li>Very strong basket lock version which you can than customize by grinding has also been added</li></ul></li><li>A version of the purge deflector for Standard mini pms with greater tolerance is now available (try other versions first before printing)</li></ul>Update 26.01.2024:<ul><li>The baskets for the standard mini PMS (standard basket and BIG BOY basket) are now slightly larger on the right-hand side to catch more of the threads that sometimes fall off the right-hand side of the purge wiper.</li><li>The bevel under the BambuLab lettering has been modified to make it easier for the printer to produce a beautiful result.</li></ul>Update 18.01.2024:New stronger basket lock version of the Standard deflector added if problems with the basket lock occur (like when using PLA-Matte)&nbsp;Major Update 15.01.2024:<ul><li>The old mini-pms is now called Lightweight mini pms, the new one is called Standard mini pms or just mini pms</li><li>All mini pms editions:<ul><li>Fixed adapter (the oval to stuck the mini pms on the printer), see hot fix update 15.01.2024</li><li>The slider (holder) for the “baskets for mini pms” now click slightly in</li><li>Chamfer bottom edge instead of rounded for an smoother print</li></ul></li><li>Standard mini pms (new ones):<ul><li>Significantly more stable than the lightweigt edition thanks to the thicker &#34;purge reflector for standard mini pms&#34;.</li><li>The standard basket is now slightly larger, making it much easier to throw the test strips in and less of the purge shooter goes astray</li></ul></li><li>Standard mini pms BIG BOY:<ul><li>Thanks to the new design, it is now possible to attach a much larger basket without any losses, the mini BIG BOY (maybe in future comes also a deeper one)</li></ul></li></ul>Hot fix update 15.01.2024:<ul><li>purge deflector oval has been adapted, it now fits better on the printer</li><li>the slider (holder) for the “basket for mini pms” now clicks slightly in</li></ul></blockquote>

A1 poop bin A1mini bucket A1 mini basket mini pms

A1Mini

Beeni82

Die&#34; Biercap&#34;, der Schutz des Bierchen vor den Krabbeltierchen.&nbsp;Die Biercap schütz euer Getränkt vor Insekten und Schmutz, allerdings ist es nicht Wasserdicht und deshalb haltet es immer aufrecht.Es ist eine Öse zum anbringen von einem Schlüsselring angebracht, somit ist die Biercap auch mobil ;)&nbsp;Wenn euch meine Arbeit/Projekt gefällt, könnt ihr mich gerne mit diesen Optionen unterstützen:<ul><li>Lasst ein Like da</li><li>Boostet</li><li>hinterlasst einen Kommentar</li><li>ladet euch die Datei</li></ul>Lässt sich leicht und schnell drucken auch in euren Lieblingsfarben. Perfekt für die kommende EM 2024 ;)&nbsp;&nbsp;The“ Biercap”, the protection of your beer from creepy-crawlies.&nbsp;The beer cap protects your drink from insects and dirt, but it is not waterproof, so always keep it upright.There is an eyelet for attaching a key ring, so the beer cap is also mobile ;)&nbsp;If you like my work/project, you are welcome to support me with these options:<ul><li>Leave a Like</li><li>BoosL</li><li>leave a comment</li><li>Download the file</li></ul>Easy and quick to print, even in your favorite colors. Perfect for the upcoming European Championship 2024 ;)&nbsp;&nbsp;

Biercap / Beercap

Nomi

luciel

Paddle holder/clamp/clip for use with stand up paddle boards or kayaks. Clips to either the D-rings or bungee cords. Clip paddles out of the way for carrying, SUP yoga, fishing, etc. Fits standard 29mm paddle shafts.&nbsp;I tested these by putting them on and off the D-rings 100 times each then clipping the paddle in 100 times, then broke them intentionally to determine the most durable infill %.&nbsp;PETG was most durable at 50% gyroid infill, 3 top and bottom layers and 2 walls.PLA was most durable at 100% solid.&nbsp;I prefer the PETG due to it having more flex than the PLA. Based on my tests, I think it would last longer in actual use. I haven&#39;t put that theory to a real world test yet, but the season is young.&nbsp;I tested them on both Carbon Fiber and Aluminum paddles. They left no scratches after 100+ tests each, but YMMV, use at own risk.&nbsp;I would recommend removing them when storing inflatable boards just in case to prevent any damage to either the clips or the board.&nbsp;The red clips pictured are the final model. The blue clips pictured on the SUP had tighter teeth but failed the break test spectacularly. The clamp part remains the same however. You&#39;ve also got a bonus pic of my broken, post-test pieces. The red one with a 50 on it was the best performer, bending where the others cracked. It had no signs of wear before I broke it.&nbsp;Happy Paddling!

Paddle Holder

Outdoor

Sevro

<figure class="media"><div data-oembed-url="https://youtube.com/shorts/lUm0ia4LMNU?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=lUm0ia4LMNU"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/lUm0ia4LMNU" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Overview.I made a scene that shows a typical mainstream UFO which try to kidnap a cow :) This concept in nice way shows “magic” magnetic force that can make things seems to levitate.&nbsp;Instructions.After print you have to glue everything with superglue except the little man that should fit without glue.In the UFO you have to put magnets. You don't need to glue them, just put them into hole and screw the cap, the more magnets the better. The hole has diameter 13 mm, so you can use magnet up to 12 mm diameter without trouble. In the cow you have to make a small tail with a wire from a paper clip. This is enough to make some “levitation” effect. If you want you can attach to clip a magnet or glue magnet to the cow body. It should makes better effect of levitation. You can use the base without the little man. There is a small hole to hook things you want, in my case I stuck some paperclips in there.&nbsp;Have fun&nbsp;

Magnetic UFO

Spielzeug

Kentsfarm

I made this Gun Stock to use with Clay Hunt VR. It was modeled from real shotgun dimensions and it works really well for me. I printed from PLA with 5 wall layers and 50% infill for strength and weight. There are 20mm holes in the Forend, Stock and Barrels to insert extra weight.You will also need.&nbsp;2 M6x35 Cap head screws2 M6x25 Cap head screws2 M6x12 Pan head Screws2 M5x20 Cap head screws2 M5x25 Cap head screws2 M6 Nuts2 M6 Washers2M5 Nuts&nbsp;You will need to make 2 x 6mm threads in the controller holder this can be done with a 6mm Tap or by carefully screwing in a 6mm screw to form the threads. The same will need to be done with the one hole in the top of the front part and the one hole in the top of the centre part.&nbsp;2x 5mm threads need to be made in the stock to attach the Butt Plate.&nbsp;NB: The controller Holder is a re-model of a part from “meta quest 3 - Simple gun stock V1.1&#34; by Strictsquid on thingiverse&nbsp;

Gun Stock For Meta Quest 3

Meta Quest 3

PILED3D

I used Fusion 360 generative design to create these 21 generations.See how it was designed and download 3 other sets of generations here <a target="_blank" href="https://piledltd.co.uk/generative-design-shelf-bracket-tutorial/" rel="nofollow noopener">https://piledltd.co.uk/generative-design-shelf-bracket-tutorial/</a>I have included the F3D file and every generation as an F3D and 3MF and details about each generation as a PDF and CSV.&nbsp;Download more generative design: <a target="_blank" href="https://cults3d.com/en/design-collections/PILED/generative-design" rel="nofollow noopener">https://cults3d.com/en/design-collections/PILED/generative-design</a>&nbsp;https://youtu.be/cBbt7UIjKvs<figure class="media"><div data-oembed-url="https://youtu.be/cBbt7UIjKvs"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/cBbt7UIjKvs" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Subscribe to my <a target="_blank" href="https://than.gs/u/445597?plans=true" rel="nofollow noopener">membership</a> for the right to sell this model or access all premium models! Visit <a target="_blank" href="https://piledltd.co.uk/" rel="nofollow noopener">https://piledltd.co.uk/</a> for more

Generative Design Shelf Bracket

Wohnung

Dr.Mussy

<h3>Don&#39;t forget to &#34;Click A Like&#34; &amp; check out my other Cool designs and Follow my Weekly dose of KooKoo uploads, PLZ leave a comment what you want next!</h3>V2 is out all the issues fixed  https://www.thingiverse.com/thing:6669713  ACCESSORIES: <a target="_blank" href="https://makerworld.com/en/models/481073#profileId-392736" rel="nofollow noopener">https://makerworld.com/en/models/481073#profileId-392736</a>  -Mongolian Style Release <a target="_blank" href="https://makerworld.com/en/models/486891#profileId-399732" rel="nofollow noopener">https://makerworld.com/en/models/486891#profileId-399732</a> -XBow Sight by Durbanpoisonpew<a target="_blank" href="https://makerworld.com/en/models/490905" rel="nofollow noopener">https://makerworld.com/en/models/490905</a> - Broadhead Organizer (X-Bow Accessories)<a target="_blank" href="https://www.thingiverse.com/thing:2695878/files" rel="nofollow noopener">https://www.thingiverse.com/thing:2695878/files</a> -Fishing Accessories&nbsp;This was requested by one of my followers, its &#34;still in the works&#34; because i wanted a professional archer to give it a go and give me feedback on how well it works as I&#39;m no expert and I only shoot bows for fun.Its intended to an all in one survival tool so i will be adding a few more accessories in the future. I also tried to use bearings in the pulleys but they didn&#39;t affect shooting much so you can def get away with just solid pulley.Print Settings: 25% infill 8 walls on most parts except the pulley, Band Mounts &amp; WB which I used 12 to make sure it does not flex Supports only for the frame, NO Brim or Raft required, Long and easy print ;)BOM: Pully: M6 60mmL Furniture screw x2Optional Flanged Bearings x4 (F696zz)Grips: M3 12mm L x2 3mm 22mm L x2Rubber Holders: M5 30mm L x2Band Aligners: 3mm 14mm L x4 pinsP Rail: M3 20mm L x1Attachments/Accessories: M6 40mmL Furniture screw + Barrel nut (Some require more than one set)Fishing Reel: Winding Handle M6 60mmL Furniture screwSpool M6 60mmL hex screw + Lock Nut Bands cut 50mm from each end to give you the equivalent of a 30lb bow at 28&#34; draw length. If you cant find the exact ones you can use any tube band with 8mm OD and 4mm ID x 180mm L... <a target="_blank" href="https://bbguns4less.co.uk/products/trumark-slingshot-power-band-heavy-pull-rr-2.html" rel="nofollow noopener">https://bbguns4less.co.uk/products/trumark-slingshot-power-band-heavy-pull-rr-2.html</a>VIDEOS: <figure class="media"><oembed url="https://www.youtube.com/shorts/coq2-F3OdlM"></oembed></figure><figure class="media"><oembed url="https://www.youtube.com/shorts/lVDLl8R8F2E"></oembed></figure>If you are interested in other prop firearms, Airsoft parts and designs or need help with the build then do join our group on Matrix: <a target="_blank" href="https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/%23GCI-General:matrix.org" rel="nofollow noopener">https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/#GCI-General:matrix.org</a>!!!Note: I&#39;m always open for suggestion and help on improving the design and proof of concept.!Don&#39;t forget to hit the LIKE! &amp; check out my other Cool designs &amp; Follow my Weekly dose of KooKoo uploads ;)

Survival X-Bow

Werkzeug

EPIQ3D

UPDATE 08 June 2024:Pistachio Bowl 2.5 has been released - <a target="_blank" href="https://makerworld.com/en/models/488822#profileId-404395" rel="nofollow noopener">check it out here</a>--------------------------------------------------------------------------------------------------------- — No support needed — — A pistachio bowl reinvented — Unique stylish design, crafted to be used, but also seen.2 in 1 function. Complete the collection, and check out the bowls little brother - Pistachio Cup So, how does it work, whats so speciel.Well.. not much ;) but the idea is, that when you dispose of the empty shells, you put them in the hole (nothing new there).BUT- when the spot beneath gets overcrowded of sheels, dont rattel the bowl - just turn the top to a new spot.If shelled nuts is not for you, then the bottom part can also be used as a standalone bowl And, its pretty … Holds about 250 grams

Pistachio bowl 2.0

Küche

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/591424/2024-01-09_z5vr7b952er7.png"></figure><h4>Dimensions (LxWxH)</h4>186,9 x 66,7 x 33,8 mm (100% scale)<h4>Basic information</h4>The model is divided into 7 movable articulated segments, which grant the model with lifelike movement, and a high range of flexibility. It prints in place, no assembly is required.<h4>Files information</h4>I've included one file in the .stl format.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/591424/2024-01-09_i094q5laoxlp.png"></figure><h4>Material</h4> PLA<h4>Layer height</h4> ≤0,2 mmor>0,2 mm + variable layer height<h4>Infill</h4>>15%<h4>Support</h4>None. The model was designed not to require any support material.<h4>Scaling</h4>Possible, however, If your machine isn't calibrated properly, has accuracy problems, or if you're dealing with filament issues, downscaling isn't recommended. When downscaling, proceed cautiously, and don't go too small, unless you want to risk mobility related issues. When printing a downscaled version, adjust layer height in proportion to the scale.But be careful, if you're printing a downscaled version, the tail fin is fairly narrow, and it's sticking out quite a lot, so it might not have enough time to cool down while printing. To eliminate this issue, print at least two instances of the model, or add a simple tower with the same height as the model. This will force the nozzle to move away from the fin, and allow it to cool down properly.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>Not necessary, contact area with the buildplate should be sufficient. If your print surface suffers from poor adhesion, consider using some adhesive spray, or other kind of adhesion booster. Using brim is possible, but not recommended, as it would be difficult, and inconvenient to remove afterwards.<h4>Other settings/ideas</h4>To make the model look even cooler, add a filament change into your gcode, and print the belly in a different color.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/591424/2024-01-09_cfuh5ahi4zg5.png"></figure>In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not. If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/591424/2024-01-09_z8v0e93k1c8u.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/591424/2024-01-09_k573xpbbcobz.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.

Articulated Whale Shark

Test

BamBam Design

Sunflower Windmill inlay cover&nbsp;I get some request for a single color opportunity of my <a target="_blank" href="https://makerworld.com/en/models/425419" rel="nofollow noopener">Sunflower Windmill</a>.I came up with this easy solution.Just print the cover inlay in black and press / glue it into the yellow printed sunflower propeller.Works like a charm 😉&nbsp;Small &amp; Big inlay for the two different propeller sizes to choose!&nbsp;Happy printing and thanks for 👍&amp; 🚀&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>