Search models, users, collections, and posts
Old_Lady_Coding
@Old_Lady_Coding
Bio
Newbie in 3d printing
Achievements
MakerWorld Guardian
Active more than 20 days out of last 30 days UTC time
Stellar Reviewer
Rate or Comment 258 different models
Pioneer Maker
Print successful 263 different models and 1,259 hours
Excellent print! Would be helpful to have a little instruction manual on how to assemble!
Share
0
0
0
I used to tape a laminated sign to the back of the wheelchair as a reminder for luggage attendant in airports that a personal wheelchair is not like something you can replace at the store. When they know that it's custom made for each person, and that it costs thousands of dollars, they care a little more whe they handle it to be taken in the cargo of the plane. At least, I keep positive that it makes a small difference!
Wheelchair Warning Sign - Pass through
0
5
Share
0
0
0
a little bigger than the others in the series. Came out nicely!
https://makerworld.bblmw.com/makerworld/model/819144/761925/ratings/84784b70-cb25-11f0-879e-b1583b3886d3.jpg
Share
0
0
0
Had to work out how to position the model. Also had to experiment with supports. The first attemps failed after 100 layers or so. One of the star's leg detached from the brim. Second attempt, I rotated slightly the model. Got the same issue. Finally decided to flip a full 90 degree (so the star side would face me) and added support (tree support didn't work, so I went with NORMAL support. It finally worked very nicely!
https://makerworld.bblmw.com/makerworld/model/814446/756402/ratings/2025-11-22_c9f7faaf3932f8.jpeg
https://makerworld.bblmw.com/makerworld/model/814446/756402/ratings/2025-11-22_c899f1621aed7.jpeg
Share
0
0
0
Excellent print! Awsome for stockings at christmas!
Share
0
0
0
Very nice fit! However, the succion from removing the container make it lift up! even with magnets!
Share
0
0
0
They are exactly the size I was looking for! No need to scale down (and then have the little hooks fall apart). Excellent for a 16 inch tree!
Share
0
0
0
Very nice! Scaled it up to 150% and plan to make a hole in the botton (with a dremmel, not quite skilled yet to modify .stl files) so it becomes a tree topper!
Share
0
0
0
Excellent! However, didn't think of measuring the cylinder. It's too narrow for Kirkland brand toilet paper...
https://makerworld.bblmw.com/makerworld/model/1980162/2129997/ratings/2025-11-16_10e63855cbc1f.jpeg
Share
0
0
0
Share
0
0
0
Share
0
0
0
No more data