D&D tundra barbarian mini with double war hammer. Enjoy!

Drow elf mini with two swords. Enjoy! Note: Be careful when removing supports, especially if you make it smaller then in the print profile.

I needed a place to hang my dust plan and brush that was out of the way. While I was creating the tape measurer tray I realized I could just hang them on the miter saw stand. Enjoy

I needed a place to keep tape measurers and pencils by my saw. I decided to design a holder so that I can always have one when i need it. It can also be used for other storage. The large one holds ~4 wide tape measures and the shorter one holds 4 narrow tape measures. I have included a test piece so you can test it out on your stand and figure out resizing if needed. Enjoy

Making a Violet from fourth wing cosplay costume for Halloween. I couldn't find any daggers I was happy with so I designed my own. No supports, pins for alignment and a little bit of glue is all you need. I painted mine with metallic spray paint and put some twine around the handle. (The notches on the handle are to help align any twine or string/rope you want to put around the handle.

Someone needed my Dewalt 5" sandpaper alignment tool for the 5" Festool. So I updated the model and added it. https://makerworld.com/en/models/2588971-5-sander-sandpaper-alignment-festool-version

I updated my 5" sandpaper alignment design from Dewalt to Festool for a maker. Let me know who it works.

Updated to add Festool 5" sander version

Portable Phone Stand I designed this portable phone stand for my wife so she could take it with her on trips. It fits together to be less then a ¼" when flat and can hold a normal phone. (not meant for tablets but you could probably increase the size and it would hold one) The back is roughly 80x140x3mm with the base being 75x80x3mm. I have also included a blank version so you can add a pattern of your own. I will be adding more patterns when i get time.

I was getting the “Clipped Wing” effect on my dress shirts from narrow clothes hangers. Rather then throw out what I have and spend $40+ on new hangers, I designed something to clip over the hangers. The hanger bar is about 10mm in diameter. No supports needed for the print.

Come support me in the wearable armor contest. I created this Viking helmet to go with my Viking battle axe for Halloween. Thought I would share it for the contest. There are two horn options with v2 being easier to get through doors. ;) I hope you enjoy. Note: I have painted this but it could be done with an AMS. The battle axe to go with the helmet. https://makerworld.com/en/models/1141960-double-sided-axe

Just created this heart shaped box for valentines. Hope people enjoy it.

Heart shaped box with arrow to store a gift or note for your love. Great gift for valentines day that you can put a note or letter in. (or small gift) I designed this for my wife and thought I would share so you can make one for your special someone. Uses 3x6mm magnets or you can print the pins. I glued up the arrowhead and arrow shafts to the heart. I designed the lower arrow/heart to be glued to the base, but the heart will stand in the holder without anything in it.

Added a double outlet self version per a comment request.

I have a infrared thermometer that I needed to store somewhere. I didn't find anything online so I designed and printed this. This is a Soyargate thermometer which i bought off Amazon. Let me know what you think.

My wife asked if there was a way to clean up the wires and put the charger off the counter. I looked and couldn't find anything I liked, so I designed one myself. This allows for one or two wires to be wrapped and fed through to clean things up. Took a bit of modelling to make it work.

Shaker lid for a 4 OZ hexagon glass jar. When i replace the sliders for our spice drawer it moved it up a slight bit. This meant our old jars didn't fit. (or my wife wanted a change) She found the jars linked below and loved them but they didn't have a shaker in them. After a couple of designs I came up with this version. The lids still seal but they don't go all the way down. https://www.amazon.ca/dp/B08YQZT48Q?ref=ppx_pop_dt_b_asin_image&;th=1

My wife and daughter are watching a TV series and I was asked if I could make an ornament. I made it so you can put something inside as a gift if you want. Its a little on the heavy side so you could reduce the infill. I have included a blank sleeve in case you want to customize it for yourself. Note: I had many failures on the sleeve until I flipped it over and printed the angle inwards. (darn physics…) I hope you enjoy and happy holidays