Did pretty good. The top layer around the edges were a bit rough and I had to file the slots where the two sides intersect, but I'm sure thats a printer issue, not a print profile issue.

Fantastic! The bottom tray is pretty tight, doubt I'll get it back out, but that's okay because I can't think of a reason why I'd want to remove it. It's the #03 plate, Deep Tray. Plenty of room for any accessories and what seems to be great protection for my dummies, all in one print. Love it!

I needed a box for my filament clips and this is just perfect! It prints beautifully! 100% prints a bit small for what I needed, so I gave that one to my daughter for some of her tiny trinkets. Scaled up to 125% and it came out the perfect size, about 3⅝" (92.075mm) x 2" (50.8mm) x ⅝" (15.875mm) deep. Thanks for this!

These complete the set! Thanks! Another great design!

Fits perfectly!

Love it! Good print!

I never printed any extras and a 1st layer messed up on me yesterday... So I printed these soon after lol! Thanks! Perfect print!

A perfect fit! This REALLY helps light things up in there. I printed all the diffusers, but end up only using the 2 in front since those are the ones the AMS doesn't cover. Thank you! Edit: PS: For those who plan on using the USB port on the front inside, you *CANNOT* turn it off unless you turn the printer off. I rerouted mine to the back hole for an external USB charger block that I already used for my vacuum sealer. Unplugging and replugging it there is FAR easier than the inside port.

Ok... pretty sure this is my favorite print to date. This is SO COOL! It printed very well. I only had to file down the edges of the knees and wrists, I think, on the bed layer. Its like the flat to round angle was too harsh, so when I put the joints together, the joint wouldn't rotate past those angles. But a light filing fixed it very quickly and easily. I love to climb, so several of my photos use RESiX's "Cliffhanger" hands, found here https://makerworld.com/models/828892. Great print, great design, great assembly guide - I can see why this is the most popular action dummy in Maker's World! Thank you!

Friend was very happy with this. She wanted 3, 1 with a name. I wasn't fond of the included model with a name, so I tried making one that looked like the one in the print picture ... but I'm not good enough in Blender yet. It came out good enough though! Thanks for this great design!

Excellent! Size is spot on and locks in place very nicely. Thank you!

I was a bit worried that this would be oversized, but after printing the 198mm one and it coming out too small, I did the math and the 203mm was close enough. Spool measures 7⅞" (200.025mm). It came out PERFECT. A nice, snap-on fit. Just under 20 minutes as well! I printed in PETG so it wouldn't be affected by the AMS 2's dryer. Printing the 2nd side now 😁 Thank you for this! It looks great!

Excellent! Fast print and a perfect fit! Thank you!

Very cool, and excellent design. Printed in PLA. At first, I thought I had assembled it wrong because the switch wasn't working. But maybe I just missed it in the video, after putting the last piece, the top strip, pull the blade out to get it to click into place. I'll be gifting these 😁

Great print! It looks awesome!