OGSpencerP

cmcraig2

This is a caliper hanger for the HSW hex system. There are a couple others I found on makerworld however mine prints flat on the build plate for a precise fit without support at the hex. Support is still likely required on the angled sides that support the caliper jaws.

Standard Caliper Hanger for Hex System HSW

organization 

Jurjen de Vries

a brick with the Bitcoin logo ₿ placed on it. Created together with the Bitcoin Lightning Piggy community. You can use multi-color, for example as at the photo an orange Bitcoin color for the brick with glow in the dark for the Bitcoin logo. Have fun building your own Brick Bitcoin city.

Brick 2x4 with Bitcoin logo

Bitcoin

TBone_427120

&nbsp;Note: Maker World has a limit for how long it allows for slicing of Print Profiles before it gives up on verification. The Level 7 model exceeds that time limits (it takes about 8 minutes to slice on a modern PC). To get around this (beta?) limitation, Print Profiles for the base of the .16mm Pyramid and Level 6 Pyramid models have been uploaded instead. For the actual Level 7 Sierpinkski Pyramid, download appropriate .3mf file from the Raw Files section.<img src="https://makerworld.bblmw.com/makerworld/draft/507170/2023-09-28_7d9dc5642ec5c.png"> All versions slice properly, and the non-A1 versions have been printed successfully.&nbsp;HistoryAfter having no luck slicing an existing level 7 Sierpinski fractal pyramid, I generated my own using OpenSCAD. OpenSCAD took nearly a day to generate a level 6 pyramid, so I almost gave up until I found there was an experimental Fast CSG option. It turns out a fractal pyramid is well suited to the new option and is at least 10x faster than the standard render option.&nbsp;In addition to the raw STL, some .3MF project files are included because it can be difficult to properly slice such a complex object in vase mode.Two 3MF (big_pyr_1_6 and big_pyr_2_0) are (almost) at the maximum bed size for the Bambu X1C/P1P. big_pyr_2_0 uses .2mm layer height which will take 28 hours to print using 374g of filament. While big_pyr_1_6 uses .16mm layers, is larger, and will take 40 hours to print using 446g of filament.The A1_2_4, A1_2_0, and A1_1_6 files are scaled to the fit the A1 bed size (<180mm) using 0.24mm, 0.20mm, and 0.16mm layer heights respectively. A1_2_4 will take ~17 hours, A1_2_0 ~21 hours, and A1_1_6 ~25 hours.&nbsp;The base_notch.3mf Print Profile is meant for the big_pyr_1_6_Bambu.3mf print. It is the maximum size that can fit on the X1/P1 print bed (without removing the filament cutter), and you should disable the calibration pattern for the print. The prime lines will overlap the model.<h4>Slicing Tips</h4>It can be difficult to successfully slice such a complex vase mode print. The difference between this<figure class="image image_resized" style="width:365.984px;"><img src="https://media.printables.com/media/prints/425623/rich_content/f1ecce08-d7cb-45fb-b0c1-c62be23c24db/thumbs/cover/800x539/jpg/slice_42.webp"></figure>&nbsp;and this<figure class="image"><img src="https://media.printables.com/media/prints/425623/rich_content/d08f3b22-6d4a-4a2e-ad7a-c32564b6a6b8/thumbs/cover/800x749/jpg/slice_40.webp"></figure>is adjusting the Line Widths by only 0.02mm.The method that gave me the most success with slicing was to scale the model to a precise height based on the layer height and the number of cells.Each cell is a pyramid. This Level 7 Sierpinski Pyramid is 128 cells tall because Level 7 => 2^7 = 128. To resolve each pyramid cell, you would probably want at least 5 layers. The more layers, the better resolved each cell will be. To find the height for the model simply multiply 128 x Layer Height x # cell layers. The maxed size Bambu print uses128 x 0.16mm x 8 = 163.84mm heightThat scales the base to the Bambu's max bed size without entering the “reserved” areas for the cutting tool or the prime lines.The slightly smaller version that takes 12 hours less to print uses .2mm lines so:128 x 0.2mm x 6 = 153.6mmFor these sizes, an Extrusion Width/Line Width is set to 0.42mm.&nbsp;Other print settings that needed to be changed were 0 bottom layers and setting the layer height for the first layer to be the same as the rest. Some wall generation implementations might be able to compensate for those settings being different, but I wanted to keep the math simple and reduce the number variables affecting the success of the slicing because it can take a long time on such a complex model.<h4>Related</h4>If you like this “basic” Sierpinski Pyramid, check out this variation for something more fancy. <a target="_blank" href="https://makerworld.com/en/models/77680#profileId-82022" rel="nofollow noopener">https://makerworld.com/en/models/77680</a>&nbsp;

Level 7 Sierpinski Fractal Pyramid (Vase Mode)

Art things

JDan Art

Revised version of my other pot leaf dragon designTested on Ender 3 v2Body supports seemed unnecessary, only the head should need them and maybe the tail. I used 15% infill, gyroid pattern, tree supports.  33hr print at full size.&nbsp;Has far less supports than the original, might also print with no supports but I’m haven’t tried it, use your own discretion. &nbsp;If you have questions before download or trouble with the file, please message me and I’ll do my best to help.

Pot leaf dragon 2 

toys

im.jackharvest

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/844994/2024-04-11_56767204580198.png"></figure>Visual Warning: I somehow ended up with 6 kids, and I have neglected to instill the fear of Lucifer into them in regards to the sanctity of electronics; My Switch is in pretty rough shape, please shield the eyes of those with gentler gag reflexes. Thank you.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/844994/2024-04-11_9c6fa8bae21568.gif"></figure>&nbsp;This builds on the original SnapSwitch design, and simply adds a headrest adapter. They are compatible with one another, so if you printed <a target="_blank" href="https://makerworld.com/en/models/421655" rel="nofollow noopener">SnapSwitch: Nintendo Switch Sun Visor Snap Mount</a>, enjoy mounting it directly to the back seat with the SnapSwitch universal headrest adapter.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/844994/2024-04-11_3254d881801628.png"></figure><h3>Super Simple to Print (Uses just 56g)</h3><h3>Snaps Into Place Using PETG Spring-Loaded Design (PLA will snap, melt, and be ultra brittle - Do. Not. Use it.)</h3><h3>Compatible with Both Original Nintendo Switch and OLED Models (and Switch Lite, just snip the bottom nub shorter so it locks in with the screw hole instead of the blank-hole that the OG and OLED have (see below).</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/844994/2024-04-11_ecc1363d856138.webp"></figure>&nbsp;Attaching is so easy, it can be done one-handed easily.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/844994/2024-04-11_28441d6d8eb698.gif"></figure>&nbsp;Now the rear passengers can enjoy the ride in style. Take the joycons off or not, doesn&#39;t matter either way. 👍

SnapSwitch: Nintendo Switch Rear Seat Snap Mount

switch stuff

G3DS

Easy 1 hand removal of A1 or A1mini face plate cover and hot end sock..Paired with the Swing up cover plate for faster less hassle  nozzle change:<a target="_blank" href="https://makerworld.com/en/models/435671#profileId-340742" rel="nofollow noopener">https://makerworld.com/en/models/435671#profileId-340742</a>&nbsp;&nbsp;

A1 A1mini HotEnd Sock Remover

3d print tools

Allpa_112

I loved a similar wooden construction toy when I was a child. However, as more and more components break and my children show a lot of interest in building and constructing, I have started my own printable system.The files in this set form the basis for BUILDfinity and already allow an unlimited number of possibilities to give free rein to your creativity. Nevertheless, I will continue to create more parts in the future to enable special sets and building projects. It will be interesting to see what else my children need ;)I have also added building instructions for three different models. So you can start by assembling a car, an airplane and a helicopter. I'm really looking forward to seeing your creations!To make the instructions easier to follow, I recommend printing the different screw lengths in the same colors as I did:10 mm = blue 15 mm = orange 20 mm = green 30 mm = red 40 mm = yellow 50 mm = grayOtherwise, there are no limits to the colors. To start with, however, at least 12 screws per length (6x round with slot and 6x hex), 6 rods per length, 2 plates per size and 10 washers, nuts and connectors each should be printed.Print settings: - min. 5 bottom and top layers - 2-3 outlines - 10% - 15% infill - 0.2 mm layer height (0.1 mm for all parts with threads) Extension-Kits available to expand possibilitys: I've a lot of extension kits for this BUILDfinity Basic-Set. They can be found on my Printables Club or on Cults3D. Just search for BUILDfinity! -----------------------&nbsp;Ich habe ein ähnliches Konstruktions-Spielzeug aus Holz in meiner Kindheit geliebt. Da hier aber immer mehr Bauteile kaputt gehen und meine Kinder auch sehr viel Interesse am Bauen und Konstruieren zeigen, habe ich ein eigenes, druckbares System angefangen. Die Dateien in diesem Set bilden die Basis für BUILDfinity und ermöglichen bereits eine unbegrenzte Anzahl von Möglichkeiten seiner Kreativität freien Lauf zu lassen. Nicht desto trotz werde ich in Zukunft laufen weitere Teile erstellen um spezielle Sets und Bauprojekte zu ermöglichen. Sind wir mal gespannt was meine Kinder noch alles brauchen ;)Für drei verschiedene Modelle habe ich gleich noch eine Bauanleitung hinzugefügt. So könnt ihr für den Start direkt einmal ein Auto, ein Flugzeug und einen Hubschrauber zusammen schrauben. Ich bin schon sehr gespannt auf eure Werke! Damit die Anleitungen einfacher umgesetzt werden können empfehle ich die verschiedenen Schrauben-Längen in den gleichen Farben zu drucken wie ich: 10 mm = Blau 15 mm = Orange 20 mm = Grün 30 mm = Rot 40 mm = Gelb 50 mm = GrauAnsonsten sind den Farben keine Grenzen gesetzt. Für den Anfang sollten aber mindestens 12 Schrauben pro Länge (6x Rund mit Schlitz und 6x Hex), 6 Stangen pro Länge, 2 Platten pro Größe und je 10 Unterlagscheiben, Muttern und Verbinder gedruckt werden. Druckeinstellungen: - min. 5 Boden- und Deckschichten - 2-3 Konturlinien - 10% - 15% Infill - 0,2 mm Schichthöhe (0,1 mm bei allen Teilen mit Gewinde) Verfügbare Erweiterungs-Sets für mehr Möglichkeiten: Es gibt viele Erweiterungen für dieses BUILDfinity Basis-Set. Diese sind in meinem Printables Club oder auf Cults3D zu finden. Einfach nach BUILDfinity suchen! -------------------&nbsp;PLANE / FLUGZEUG<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_37fl15gkaosy.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_4bjdmghzegxz.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_z9xuah479epg.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_osmqoohyj7pd.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_szms8b8sza65.jpg"></figure>&nbsp;&nbsp;HELICOPTER / HUBSCHRAUBER<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_pwpimbm7jbi0.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_tvi1k2wbpv73.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_u34j9sa0pkcf.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_r3d08g75lj5b.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_oylyykjz2dse.jpg"></figure>&nbsp;&nbsp;CAR / FAHRZEUG<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_c10lsgqh947x.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_urebk4tecjbm.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_szb4cl81zn1a.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/362538/2024-01-06_x6vk581p67p3.jpg"></figure>

organization

Bitcoin

Art things

toys

switch stuff

3d print tools

Education