Hi everyone, since there were many requests for the different Sizes for my Snap on Can handle. Here is Version that can adapt to almost any size (as long the diameter is ~66mm. It fits every can between 112mm and 180mm. The only hardware needed are 2 10mm x 2mm round magnets

I just released Booze Pong — a miniature beer‑pong game you can print in minutes! Compact, fun, and perfect as a desk toy, for small challenge with friends or as a nice gimmick for the next Party. Check it out and let me know what you think! #Newmodel #Homebar #Contests #Contest(Edited)

Hi everyone, ive added a 16oz version to my snap on can handle and also the version with the snap on lid. Check them out here --> https://makerworld.com/de/models/507575-snap-on-can-handle-33l-12oz-5l-bierdosengriff#profileId-423370

Just released my Triple MixXx — a modular 3‑bottle cocktail and long‑drink mixer. Each valve has a fixed flow size that defines the mixing ratio, and the design prints and assembles easily. I also included the Fusion 360 file for the valve block so you can adapt it to your own bottles or setups. Excited to hear your feedback and see your remixes! #Homebar #Contests #Newmodel #Sharing Makes(Edited)

I´ve added a shorte version of the bag clip, Check it out now

Updated my miniature Beerpong and added a second model for the Catapult which is a bit thinner so the strength of your shots is easier to dose. Have Fun Playing

An Ice Scraper with a 3D-Printed brush. Scraper for the ice, brush for the snow. Not much more to say. It is an early version so Your feedback is very welcome! Cheers! #Newmoddel #Winter #scraper #ice #Snow(Edited)

My take on the Book Nook design contest: A portal inspired minimalistic and elegant book nook / book stand.   #Contests #Newmodel #Portal #Videogames

This is my take on the classic bag clip with a screw on lid. Most designs i´ve found were secured only at the clip at the end and wore out over time (like bending open, not securing the bag properly). I conquered this problem by securing the bag with an additional handle piece sliding over the the part of the handle that secures the bag in place. Just be aware that not to much of the bag is supposed to stick out on the top since the sliding piece might not fit properly. Enjoy Printing!

A simple deckbox with a sliding lid. The lid keeps shut nicely. The boxes outer dimension fits the Ultimate Guard Boulder → the box fits in their products like the archive etc… I will update the model with new lids when i model them. Got any ideas for sick lid designs? Just leave a comment and i will give it a try! Cheers guys!

Take a look at my newest creation! A simple slim fit case for the Xiaomi 15. The case snaps easy to the phone, yet stays connected securely. Make your smartphone pop by choosing a different colour for the protective ring around the camera bump.

Check out the new version of my snap on can handle, now with lid! As the old model i got the sizes 0.33l, 0.5l and 12oz (355ml). Enjoy your drinks Cheers!

Hey MakerWorld! I just released a fun little project I’ve been working on – a Miniature Beer Pong Game, and it's 100% 3D printable, including the tiny cups and balls! It’s a compact, support-free design that’s perfect for your desk, parties, or as a fun gift. Just print, assemble, and let the games begin! 🥳 Would love to hear what you think – and if you print it, share your makes! 🙌 Let’s see who’s got the best aim on a tiny scale 😄

A simple shelf under shelf mount for the WolfBox MF50. The mount is slightly tilted to the back so the blower and the attachments do not fall out. I made 2 versions for right and left side mounting. Both models have 3 holes for screwing it under a shelf or table for example. If you do not want to screw it in just use glue or double sided tape.

A downpipe adapter to connect 12 watering lines for automatic rainwater irrigation. Great for protecting tomatoes or use on a greenhouse downpipe. Includes a 3D-printed sieve to prevent hose clogging. Printed in PETG, but stronger filaments are possible. Fits pipes with 54mm outer diameter; hose outlets are 8.3mm for 8mm inner diameter hoses.

My Design of a Ball Penn with a bolt action mechanism. I also designed two cases, an one pen version and a double case. The pen fits ISO G2 refills and you can use a spring from an old pen (most of them fit) or the bambu store 0.3x4x20mm springs. I used the bambu standard PLA. Other materials should work as well For easier placing of the magnets of the case i recommand my magnet setting tool. https://makerworld.com/en/models/534036-magnet-placing-tool-easy-magnet-setter#profileId-450895

I picture i took myself turned into a beautiful peace of Art

As i played around with the Bambu Makersupply magnet switch LEDs this came to my mind. The perfect gadget to spice up you DnD rounds or other Boardgames / TCGs.

A simple power counter for the one piece tcg.