NomadicBoogy

Zedzonze

Convenient dice box, with practical stand. You can also insert a pencil, an eraser and your D&D card inside. So you can always carry everything you need with you.

Dice Box + Dice Stand

Brant

A retractable party popper toy that uses replaceable and customizable faceplates in place of a blast of confetti&nbsp;&nbsp;&nbsp;Highlights<ul><li>The “string” can be pushed back into the barrel so you can experience the fun of a party popper again and again</li><li>No confetti mess to clean up</li><li>Can be easily stored and reused for other celebrations</li><li>Great for photobooths and pictures since you don't have to time the blast</li><li>The noise isn't as loud as a traditional popper so it could be used in quieter situations</li><li>Additional faceplates can be made to your liking</li></ul>&nbsp;&nbsp;Printing notes<ul><li>There are 4 plates (you do not have to print all the plates)<ul><li>Plate 1 (default: matte white):<ul><li>Barrel engraved with shapes</li><li>Gear</li><li>Handle half</li><li>Extrusion half</li></ul></li><li>Plate 2 (default: silk gold):<ul><li>Wavy streamers faceplate</li><li>Straight streamers faceplate</li><li>Bolt with star-shaped cap</li><li>Star-shaped nut</li></ul></li><li>Plate 3 (default: black):<ul><li>2024 faceplate</li></ul></li><li>Plate 4 (default: matte white):<ul><li>Barrel with no engravings</li></ul></li></ul></li><li>Plates 1 and 2 are sufficient to print the entire model in the cover but if you want:<ul><li>Duplicate another faceplate from plate 2 or 3 so both sides show the same faceplate</li><li>Print the 2024 faceplate in place of one of the streamers (you may want to print this in a darker color than the extrusion half for visual contrast)</li><li>Print the barrel with no engravings on plate 4 in place of the barrel on plate 1</li></ul></li><li>Print the parts: barrel, gear, handle half, extrusion half, 2 faceplates, bolt, nut</li></ul>&nbsp;&nbsp;Assembly instructions1. Insert the gear into the rails of the handle half<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/294972/2023-12-19_2b53a93ea441d8.gif"></figure>&nbsp;2. Cover the top of the gear with the extrusion half (surround the gear with the walls of the two halves)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/294972/2023-12-19_765bb6e6e2e52.gif"></figure>&nbsp;3. Insert the assembled gear and the halves into the barrel – you should be able to see the hole of the gear through the barrel<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/294972/2023-12-19_5563e006827508.gif"></figure>&nbsp;4. Push the bolt with the star-shaped cap through the barrel and gear hole<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/294972/2023-12-19_52038300674738.gif"></figure>&nbsp;5. Flip to the other side and twist on the star-shaped nut<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/294972/2023-12-19_cee257c170b01.gif"></figure>&nbsp;6. Pull the handle to expose the extrusion half<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/294972/2023-12-19_d09f63294e2f48.gif"></figure>&nbsp;7. Press down the faceplate onto the bumps of the extrusion half<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/294972/2023-12-19_f3e2222b058d78.gif"></figure>&nbsp;8. Flip to the other side and press down the other faceplate onto the bumps<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/294972/2023-12-19_3b194b6a4f704.gif"></figure>&nbsp;9. Complete!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/294972/2023-12-19_84a2008d2b473.gif"></figure>&nbsp;

Retractable Party Popper

Random Stuff

Scattered Collectables

Ornamental Pokeball modelSimple print, supports not necessary but can help bridging. Glue the parts together or leave the top unglued so you can open it and put something insideThe outer ring is optional, the part just slides over and can be held on with glue&nbsp;Join my patreon for the right to sell physical prints https://www.patreon.com/ScatteredCollectables

Ornamental Pokeball

Pokemon

Marvel

Diru 3D

qaudro mikey with credit for my partner @ohms714_3dprintz

Mikey Frame

Disney

Bearded Dad Designz

Made these awesome gnome magnets for Christmas decorations and figured I would share them, &nbsp;For the magnet part I used a 20x3 magnet and some glue to secure it.

Christmas Gnome Magnet Pac

Christmas 

dangles_

VERSION 2Changes made to the main design and have been confirmed to be sturdier and easier to get the blade in. Old versions have been removed and print profiles for main model and shorter model have been added. Version 2 also includes a “push stick” in the profile to help safely install the blade. &nbsp;About the ModelCuter that makes cutting those annoying sheets of Christmas gift paper rolls smoother and cleaner. &nbsp;PartsDesign is based around a #11 Hobby Blade. Packs of a lot of these can be found on amazon for very cheap. &nbsp;AssemblyOnce printed and blades have been acquired, you can *carefully* slide a blade into the slot. Using the printed “push stick” to push the blade further in. The lower hole is designed to allow you to use a small screwdriver to pull the blade down into place (as well as take it out).

Wrapping Paper Roll Cutter (VERSION 2)

Useful prints

TripleGWorkshop

– .15mm layers are recommended for details – Quick Guide to changing filament~<ol><li>Have some paper to push away extruded filament.</li><li>When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down. Doing this has given great, repeatable results.</li><li>Use a tool like this to help changes→ <a href="https://www.printables.com/model/329171-filament-change-tool" rel="nofollow">https://www.printables.com/model/329171-filament-change-tool</a></li><li>Have fun & check out my whole 2d art collection <a href="https://www.printables.com/@TripleGWorkshop/collections/345687?o=rating" rel="nofollow">HERE</a></li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/123364/2023-10-27_5v68q4k1c933.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/123364/2023-10-27_r68t5rmgntlg.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/123364/2023-10-27_8ljjin1ckbk5.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/123364/2023-10-27_236gvmw98l7v.png"></figure>

Harry Potter House Bookmarks 2 Color

Harry Potter

A can cozy with a hearty grip. Cans do not slide out! Easy to hold on to. Perfect for any 12 oz US can. NO Supports!&nbsp;I have already switched over to using these full-time.<figure class="media"><div data-oembed-url="https://youtu.be/mR0ozx_P0Hw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/mR0ozx_P0Hw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<figure class="image image_resized" style="width:661.578px;"><img src="https://media.printables.com/media/prints/461379/rich_content/d9dff3f6-a602-42b0-b99d-a2a374206d7e/thumbs/cover/800x614/jpg/20230424_072435.webp"></figure>

Can Mugger - Insulated Drinking in Style

Junk I Probs Don't Have Room For

SpectreGadget

If you like this model, please throw me a like. Designing these models takes time, filament, and caffeine. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=AESRCQSQW6TS2" rel="nofollow noopener">If you want to support my work, please buy me some caffeine.</a> Thanks!&nbsp;Same model, just 'painted' using BambuStudio for printing on BambuLab printers with an AMS for four color printing. I used Microcenter Inland brands: White PLA+, Blue PLA+, Black Silk PLA , Silver Silk PLA, True Red PLA+BTW, I painted silver in the panel crevices to give add additional depth to the model when printed. Not really ‘standard’ but i like out it came out.Best to optimize your flushing volumes! With tuning, this model's print time can be reduce by hours with optimized flushing volumes.&nbsp;*Update 7/29/23 - Updated R2D2.3mf to include the leg and foot pins I created and used on mine. For the middle foot, I just used some wire. Added the two files separately for easier download.

R2D2 Alexa Echo Dot 3 Dock (Colored for AMS)

Star Wars

p4mp3r072

Full-scale model of the shotgun that appears in the second part of Hellboy: The Golden Army. It is designed in Fusion360, from videos and photographs. All parts fit perfectly. A spring is placed on the triggers to have a retractable effect. The base is made of wood and PLA, that is just the frame at the top of the base. I put fusion images where you can see all the parts for a simple assembly.

HELLBOY'S BIG BABY SHOTGUN

Props

rostap

<h5>News</h5><ul><li>March 20, 2022 added bigger hook</li><li>March 21, 2022 added USB flash drive holder</li><li>March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw)</li><li>March 21, 2022 added box (screwed with M4x10 screw)</li><li>March 21, 2022 added 2 wall parts (224x190 and 293x271)</li><li>March 22, 2022 added SD card holder(screwed with M4x10 screw)</li><li>March 22, 2022 added USB flash drive holder (screw in no need)</li><li>March 22, 2022 added box (screw in no need)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>April 4, 2022 added shelves (4 dimensions)</li><li>April 6, 2022 Added drawers (found as a <a href="https://www.printables.com/en/model/163008-honeycomb-box-for-honeycomb-wall" rel="nofollow">remix</a>)</li><li>April 12, 2022 Added wrench hooks (2x)</li><li>May 6, 2023 Added more step files</li><li>July 18, 2023 Fixed some stl and step wall files. Added image-diagram how to install your honeycomb</li></ul>Don't forget to look at other <a href="https://www.printables.com/cs/model/152592-honeycomb-storage-wall/remixes" rel="nofollow">remixes</a> - there are a lot of interesting modifications and accessories<a href="https://www.reddit.com/r/honeycombwall/" rel="nofollow">https://www.reddit.com/r/honeycombwall/</a><h3>Honeycomb wall</h3>The basic part of the wall is printable on the Prusa Mini printer. It is necessary to turn off the skirt or set the distance to 1mm in order for the part to fit it on the pad. You can connect the basic parts of the wall together. You can connect it also with printable parts which can be used in various ways (you can use it for screwing to the wall, you can use it as a holder for hanger or as a holder for hook). <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tisgszo2nt8g.png"></figure>Choose the correct part size for your printer, or use <a href="https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b" rel="nofollow">https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b</a> for a custom size.<h5><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_frme5d4gs7i6.jpg"></h5><h5> </h5><h5>Diagram to show how to install your honeycomb.</h5><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_yrccc5kolg4d.png"></figure><h5> </h5><h5>Printing settings</h5><ul><li>layer height: 0.25 - 0.3</li><li>perimeters: 3 (or more - without infill for faster printing) </li></ul><h3>Parts for attaching honeycombs to the wall</h3>Some of the parts (which are orange on the picture) you can use for hanging to the wall or for connecting the basic parts together. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_be43o1ws3a92.png"></figure><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ajojx36s1wlm.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_2nxibc3el5li.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fqxf6bjpuxz4.jpg"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Fasteners and parts for attaching hooks and objects</h3>There is added one part with the nut (size M3, M4, M5) inside which can be used for screwing whatever holders you want. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_1rsdiotho5yk.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ro3vw4oameqz.png"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_oot6uv6g50m7.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hjjkudqq3rfc.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5rje9cxan9um.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Hooks and holders</h3>This is space for new holders and hooks which will be added as needed. Hook bottom and side is prepared to insert to the empty insert part. <figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_lcf73emxp801.png"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_rtv2d4cr55ea.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5nhoo4s4wc6p.png"></figure></td><td> </td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fcnuojpuy9qg.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ochq2a4i6fyp.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_nquxdyj69cru.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_e3jw2h6pd0mm.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_avw6edcfzzjq.jpg"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hdrj456s7o1j.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_wsokal0vy58z.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_en42os2oqu0j.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tqjhj78mu78r.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sctwl7slauf5.jpg"></figure></td><td> </td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_6bz02n1vimho.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qxwzvybnot3t.jpg"></figure>&nbsp;</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_pa8c7le03qfq.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Other parts</h3>This is cover for the connecting part which is used for hiding the screwer.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qmmoju4hk27r.jpg"></figure>And also you can use the second part (as shown in the picture) which can be used for additional attaching the honey comb to the wall. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hnjcfsheftbq.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sc318q6f89ef.jpg"></figure></td></tr></tbody></table></figure><h5> </h5><h5>My printing settings for all inserts </h5><ul><li>layer height: 0.2</li><li>perimeters: 4</li><li>infil: 20%</li></ul><h4> </h4>

Honeycomb storage wall

Organization

SlowEvo

Update 10/26: Updated models available. There are profiles for multicolor and single color. The biggest change is embossed text which will look much better when printed. Read profile details for more info. I strongly suggest you print the updated model.&nbsp;Put on display infill patterns! Looks cool too says my wife!&nbsp;<a target="_blank" href="https://makerworld.com/en/models/37162#profileId-35568" rel="nofollow noopener">Check out v2 here!</a>&nbsp;I wanted to display infill options so that I can more easily visualize and feel the strength. A big reason for making this was to show my friend who only used cubic, I wanted to show him he had a plethora of options.&nbsp;Blocks are 30x30x8.6. Since the first outer wall is a different color from the infill and there's a small gap, the infill is 29.1x29.1. I originally wanted it to be only infill with no outer wall but I was having difficulty and I like the way it came out like this so I didn't try to tweak anymore.&nbsp;You'll see in the 3mf for the modifiers..<ul><li>Wall loops - 0</li><li>Top shell layers - 0</li><li>Sparse infill density - 15%-20%</li><li>Sparse infill pattern - different for each block</li></ul>I had to leave a tiny gap in between the outer wall that surrounds the infill blocks so that I was able to paint them.&nbsp;Total model size: 133x166.8x10&nbsp;Note: Infill patterns missing are adaptive cubic and lightning*. 1. because adaptive cubic can't really be shown with this 2. lightning infill I believe is (usually) the least practical infill 3. I wanted it wanted to be symmetrical. Also, Octagram Spiral and Archimedean Chords aren't really shown properly since they aren't in the center of the model**.*The updated models contain lightning infill. It replaced Support Cubic since it looks too similar to Cubic in this model.** The updated model is rearranged to have Octagram Spiral in the center.&nbsp;*.f3d and STEP are included in case you'd like to add to them or remix in any way.*Unfortunately due to profile farmers starting to download, change negligible things in the model and uploading them as remixes(often without stating what was changed) I have taken down STEP and f3d files. If you would like these files you may message me and we can figure out a way for me to send them to you. Unfortunately the minority of people ruin it for everyone. I know this won't stop it but it's a deterrence. For now, I still have the license allowing remixes. I'll change the license if necessary. I apologize I had to do this.

Infill Display

Willi 3D

Create your BaBo organizer! A system created to store them all!&nbsp;Description:This is the BaBo drawer module 30. The drawer module is the heart of the system as it carries the inserts and is therefore the main page of the system.&nbsp;The usable dimensions of the drawer are 240x210x30. The drawer has space for 8x7 inserts. The inserts have a grid of 30x30mm, this means a 1x2 insert has the dimensions 30x60mm.&nbsp;BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer.&nbsp;It was important to me that even newbies could print and use the system, which is why all parts are printed without support and the parts are already pre-sliced.&nbsp;Furthermore, all inserts for the accessories and tools that the printer comes with are free. Only the special modules and inserts are only accessible to members of my club. The purpose of the club is to promote my work and to reduce the costs that I incur. I would also like to find people who are interested in expanding this system.&nbsp;The entire system uses only 1 type of screw, M3x8 countersunk screws.Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2023-09-20_95fdae0c8d181.jpg"></figure>Update:(13/09/23)<ul><li>Assembly optimizations</li></ul>(31/10/23)<ul><li>improved connection between modules</li><li>easier to push back the drawer</li><li>print profile optimizations</li></ul>(26/01/24)<ul><li>design optimizations to prevent warping</li></ul>&nbsp;Printing:Layer height: 0.2Supports: NoBrim: NoMaterial: all&nbsp;Assembly:Follow the instructions in the picture.<ul><li>printed parts</li><li>16 x M3x8 countersunk screws.</li></ul>If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work buy me a coffee (PayPal).</a> Thanks!&nbsp;Clubcontent:<figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2024-06-13_ccadb89c071b7.jpg"></a></figure><figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2024-06-13_c05e6d1cbb9c7.jpg"></a></figure>

DnD