Nodesktophero

Frontx

another version of the mini plane. the first layer must have a height of 0.119, for greater strength. other layers are set to 0.08mm. Bend the rear wings under approx. 45°. The large wings can also be bent. Throw the glider up, then it flies far, suitable for years of use even into the wind.The wings must be printed on 3 layers, otherwise the plane does not fly well.The Airplane is printed upside down, after printing the model must be turned and the wings bent in the right direction

mini airplane 4.0

Toys

AdiCrafts

Box for dart storage, best for half length dart. 5*8 storage.Box for UDL 12 CA shotgun shell storage. 4*5 storage.Category: Sport & Outdoors

Nerf/Foam Dart Storage Box + UDL XM1014 Shell Storage BOX

nerf

Vejstrk

<h2>LUMINOUS MOUNTAINS SILHOUETTE</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_bc06b4de30245.jpg"></figure>&nbsp;The model is also designed for printing on small Bambulab A1 mini printers.&nbsp;The individual parts need to be glued together (the parts contain centering points for easier assembly).&nbsp;I recommend printing from PETG material, due to heat resistance. The Solid variant can be printed from PLA.&nbsp;<h4>!!Parts marked with the letter T need to be printed from translucent filament.!!</h4>&nbsp;<h3>Dimensions</h3>If necessary, the scale can be adjusted.<figure class="image image_resized" style="width:60.42%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-17_caff00f461875.jpg"></figure><h3>Mounting points</h3>You can hang the model on nails or stick it with double-sided adhesive tape.<figure class="image image_resized" style="width:58.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_4d3f633629d52.jpg"></figure><h3>Variants</h3><h4>Horizon</h4><figure class="image image_resized" style="width:60.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_325a44397cc6b.jpg"></figure><figure class="image image_resized" style="width:59.76%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_c1d2005566043.png"></figure>The length of the led strip is 124 cmThe cable can be routed through the center or at the edges<h4>Sun</h4><figure class="image image_resized" style="width:46.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_74de918428361.jpg"></figure><figure class="image image_resized" style="width:52.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_2c98a6863ea8b.png"></figure>The length of the led strip is 48 cm&nbsp;<h4>Solid</h4><figure class="image image_resized" style="width:50.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_3750595b6e0ba.jpg"></figure><h3> </h3><h3>Electronics</h3>You can use WS2812B RGB LED Strip Light from Bambu lab store&nbsp;The model is designed for led strips (max 10mm).&nbsp;I recommend led strips of warm colors (2000-3000 K) or RGB.&nbsp;&nbsp;<h2>Assembly</h2>The parts are described from the back. For the Horizon variant, the 1T diffuser belongs to part 1, etc.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/547466/2024-02-07_9016e85d17c46.png"></figure>&nbsp;&nbsp;

Luminous mountains silhouette

Interior

s0hm

Update&nbsp;28-03<ul><li>Added name plate holders in 5 different sizes.</li><li>Added grip rings in 3 different sizes.</li></ul>&nbsp;22-01<ul><li>Added bottle holders in 6 different sizes.</li><li>Added spool holders in 3 different length.</li></ul>&nbsp;19-01<ul><li>Added shelf buckets in different sizes.</li><li>Added Pliers holders (3 sizes) facing upwards</li><li>Added Pliers holders (3 sizes) facing downwards</li><li>Added straight hook for hanging up small things (70/54mm)</li><li>Added small hooks</li></ul>&nbsp;17-01<ul><li>Added new insert types</li><li>Added new plate for Shelfs in different length</li><li>Added new plate for different pegs</li></ul>&nbsp;<blockquote>NOTE: The pegs might have a tighter fit depending on which filament is used. If you find them to tight, slightly trim the edges of the pegs with a sharp knife. If you find them to loose, cross-cut the edges of the peg with the filament cutter to create a smal indent, creating more friction.</blockquote>&nbsp;This is a collection of essential tools for 3D printing, all organised on the HSW (Honeycomb storage wall), originaly created by <a target="_blank" href="https://www.printables.com/model/152592-honeycomb-storage-wall" rel="nofollow noopener">RostaP</a>.&nbsp;Please see the printing profile for the correct settings. Only adjustment that you could do is to remove the second (top right corner) default purge line to give the grid wall a bit more space. This can be done in the startup G-Code (please be carful)&nbsp;Other than that each plate and STL has the optimal print settings pre-configured.&nbsp;&nbsp;Base plate&nbsp;The base plate with maximum printable size for the X1C, P1S, P1P, A1 of 252x224 mm. For optimal printing, please consider removing the top right purge line from the startup G-Code. (please be carful with altering startup code! if you don't know how to do this just leave it as is.)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779124/2024-01-16_af6e06efdb2b7.png"></figure>&nbsp;Basic set of inserts&nbsp;This is the basic set of inserts that you could use for a single wall. It contains the:<ul><li>Corner inserts, either taking a 3.5mm screw or double sided adhesive tape</li><li>Covers for the corner inserts</li><li>Standard open inserts for holding accessories and pegs</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779124/2024-01-16_b6f0efdeef0a4.png"></figure>&nbsp;Collection of additional inserts&nbsp;This is a set of different inserts that can be used to either connect multiple baseplates or different fixtures for accessories.<ul><li>2 way inserts</li><li>3 way inserts</li><li>2 way inserts with M3 bolt mount</li><li>single insert with M3 / M4 bolt mount</li><li>90 degree hook</li><li>Cover inserts for decoration</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779124/2024-01-16_f6230a173f139.png"></figure>&nbsp;Basic accessory set&nbsp;This set gives you mounting brackets for the commonly used 3D printing tools such as<ul><li>3DLac adhesive spray bottle</li><li>Revell glue</li><li>De-burr tool</li><li>Filament cutter</li><li><a target="_blank" href="https://makerworld.com/en/models/42111#profileId-42703" rel="nofollow noopener">Bed scraper</a> (For textured plates)</li><li>Bed scraper metal (For smooth plates)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779124/2024-01-16_bfcb8b71c2e08.png"></figure>&nbsp;ShelfsA set of shelf in different length<ul><li>56mm</li><li>97mm</li><li>122mm</li><li>178mm</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779124/2024-01-16_9ccf30ef818bb.png"></figure>&nbsp;Collection of pegsThis will be a growing collection of pegs that can be inserts into the wall inserts. Please check from time to time as i'll be creating new pegs and adding them here.&nbsp;<ul><li>Wedge pegs</li><li>Angle pegs</li><li>Pliers (down) 1/2/3</li><li>Pliers (up) 1/2/3</li><li>Hooks (thick: single, double) (thin)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779124/2024-01-19_e1830900ce29d.png"></figure>&nbsp;&nbsp;Shelf BucketsA set of different shelf buckets, both enclosed and open front on different sizes<ul><li>60mm</li><li>160mm</li><li>210mm</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779124/2024-01-19_fc0713fe2781a.png"></figure>&nbsp;Bottle bins and traysA set of bottle holders in different sizes including a 100mm strong plate. Tree support is added where needed.<ul><li>20mm</li><li>30mm</li><li>40mm</li><li>50mm</li><li>100mm</li><li>100mm double mount</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779124/2024-01-22_cfe8c347afb81.png"></figure>&nbsp;Spool holderA set for mounting spools in 3 length. Tree support is added where needed.<ul><li>91mm</li><li>132mm</li><li>173mm</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779124/2024-01-22_9657c66304164.png"></figure>&nbsp;Name labelsEasy yet usefull addition to the Honeycomb Wall Storage system. Available in 5 different sizes<ul><li>30mm</li><li>40mm</li><li>50mm</li><li>60mm</li><li>100mm</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779124/2024-03-28_e6d6463b7ec07.png"></figure>&nbsp;Grip ringsUseful for gripping round objects. Each is 1mm smaller in diameter than the usual objects, adding extra grip. Also you can choose between a narrow and a wide angle opening.<ul><li>19mm</li><li>29mm</li><li>39mm</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779124/2024-03-28_66a57248562b5.png"></figure>&nbsp;&nbsp;Enjoy!.

HSW Essential Kit collection (Honeycomb Storage)

bhling

A common doggy bag holder that can easily be carried or clipped on your dog's leash or collar to ensure you always have a bag ready for the inevitable. It is designed to fit a standard roll of bags and be easy to unscrew to replace the rolls when needed.&nbsp;Updated 01/28/24: improved inner rod for more strength and to better constrain bag roll; adjusted clip to stay together more securely; removed the 2nd small clip from print

Doggy Bag Holder

gadget

Raybesh

In the pictures you can see an empty slot. This is where I would put a 0.8mm nozzle. IF I HAD ONE ლ(ಠ□ಠლ)Edit: I finally have one :D&nbsp;This goes well with the other Gridfinity storage <a target="_blank" href="https://makerworld.com/en/models/158289#profileId-173724" rel="nofollow noopener">bin for hotend socks</a> I've created.Also check out this <a target="_blank" href="https://makerworld.com/en/models/163010#profileId-178954" rel="nofollow noopener">2x1 Gridfinity bin</a> which stores 5 nozzles upright.&nbsp;I printed this with a 0.6mm nozzle, but I've added a profile for 0.4mm as well.&nbsp;I printed the Gridfinity box this model is based on, however I was a little unsatisfied about a few things.<ol><li>There was no space for leftover filament (I would have to cut it off; unfortunately for me, I'm lazy)</li><li>The nozzles where really hard to take out</li><li>The box height wasn't according to the Gridfinity standard (it was missing a few millimeters)</li><li>The screw hole cutouts at the bottom were a mess</li></ol>I've improved 1. and 2. by creating a bigger gap above the nozzles. Now filament fits and I can get them out more easily. I have pretty tiny fingers though, so your mileage may vary.&nbsp;Number 3. was easy to fix. Just make it taller so from the bottom to the lip its a multiple of 7 (with tolerance).&nbsp;4. was fixed by just putting in magnet holes. I've also only put holes on the outer corner of the box, so you use 4 magnets instead of 16 (or also 4 but then way to many useless holes).&nbsp;&nbsp;This may sound like I don't like the original. On the contrary! I love the idea and how snug the nozzles fit. If I didn't like it, I wouldn't remix it!Let me know how I can improve things!

A1 Series Nozzle Storage - Gridfinity 2x2

Gridfinity

Encrust3d

This is a slim poop bucket for the A1 printer that I made to fit perfectly between my new A1 printer and my Ikea pax cabinet. There isn't much room where I have my printer and I needed a poop bucket that was slimmer than any other online, so I made this in Fusion 360. This model is compatible with the top mount AMS lite hardware. If you would like an extended version of this, you can download it here: <a target="_blank" href="https://makerworld.com/en/models/106061#profileId-113236" rel="nofollow noopener">https://makerworld.com/en/models/106061#profileId-113236</a>&nbsp;1/14/24: uploaded no logo version

Slim A1 Poop Bucket

3d print

BamBam Design

Mini Bit Tool HandleEasy printable small bit tool handle for normal hexagon bits (¼" ~ 6,35mm).Holes for Magnets Ø6x1mm are integrated. You can simple glue the magnet in if you want.You can choose “Normal Handle and "Extra Grip Handle” with a fuzzy skin.After print it could be a bit tightly, after a few uses it has the perfect fit.😉&nbsp;Happy printing👍&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Mini Bit Tool Handle - Screwdriver

tools

franceschellifederico

Introducing the "Cable Organizer" – a practical solution designed from the ground up by Federico Franceschelli. Tired of tangled cables and cluttered workspaces? This sleek and user-friendly cable organizer is the answer. With a focus on simplicity and functionality, ensures easy cable management for a tidier and more organized environment.&nbsp;Key Features:<ul><li>User-Centric Design: Created with the end-user in mind, this organizer is intuitive and easy to use.</li><li>Versatile Compatibility: Accommodates various cable sizes, keeping everything neatly in place.</li></ul>Say goodbye to cable chaos and hello to a cleaner workspace with the "Simple Cable Organizer" by Federico Franceschelli. Download it now and enjoy a more organized and efficient daily routine.

Cable Organizer v3

organise

glenngri

Tool to remove the hitch cover from the rear of a Tesla Model Y

Tesla Model Y hitch tool

Tesla

Majkl789

If you need coin for shopping cart, you can have always this in your wallet. With this useful kit card you can have five coins everywhere. Size is like standard credit card. Coin size is like 1 euro.

Kit card - shopping cart coin (credit card size) for your wallet

Fork

Gallus Design

This is laptop stand that I designed for each size. It's print in plate so need assembly needed after print. Besides it stage of height so you can adjust the angle to what you want. Plus it's foldable, so only 11 mm thick (except hook) if you carry in your bag. Light model is less than 50gr each and strong enough to 13" laptops. If you have bigger laptop, then I suggest Strong version.

Laptop Stand - Foldable - Adjustable - PiP

Office

fay3dlab

&nbsp;A few months ago, i sold my Polygon Bend R2 bike due to financial constriction and i wasn't cycling all that much.. As nostalgia memories kick in I began to think what i can make with the bicycle in mind.. and after a few days.. the mini bicycle card came to fruition..The whole kit card was modelled using Tinkercad and 3d printed using Bambulab P1p..Assembly video can be found here: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=LcFwJKVBVuo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/LcFwJKVBVuo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><a href="https://www.buymeacoffee.com/fay3dlab" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/arial-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 109px !important;" ></a>