NoFutureKid

palmer_inc

Bambu Lab X axis projectnot yet tested.Someone also built an x axis with other components, he said there is a problem if the x axis is 30 grams heavier than the original, the input shaper no longer works so it no longer regulates, resonance error. The project is therefore set until a costum firmware appears.parts have been printed and adapted, if anyone would like to adapt it I would be happy to be linked. It took a lot of time to trace it, treat the project with respect. Translatet from German :-) Bambu Lab X Achse projectnoch nicht getestet.Jemand hat auch eine x achse gebaut mit anderen komponenten, er sagte es gibt ein problem wenn die x achse 30 gramm schwerer ist als original, da funktioniert der input shaper nicht mehr somit reguliert er nicht mehr, resonanzfehler. somit ist das projekt eingestellt bis eine costum firmware erscheint.teile wurden gedruckt und angepasst, wenn jemand es noch anpassen möchte würde ich gerne verlinkt werden. es hat sehr viel zeit gekostet es nachzuzeichnen, behandelt das projekt mit respekt. You need clamps: <a target="_blank" href="https://makerworld.com/en/models/148417#profileId-162159" rel="nofollow noopener">https://makerworld.com/en/models/148417#profileId-162159</a> https://makerworld.com/en/models/148414#profileId-161936

Bambu Lab X Gantry 8mm rods with 15mm bearings MOD Project X1C/P1P/P1S

Bambu Mods

The Big Greek

Complete Rod Cleaner Z-Axis Version No.1 with Logo (simple and fast) Single Version&nbsp;★ New ★ Update from 29.12.2023 <a target="_blank" href="https://makerworld.com/de/models/112326#profileId-120249" rel="nofollow noopener">Automatic Z-Axis Lube Helper</a> ★ here is the link <a target="_blank" href="https://makerworld.com/de/models/112326#profileId-120249" rel="nofollow noopener">https://makerworld.com/de/models/112326#profileId-120249</a>&nbsp;★ New ★ Update from 21.12.2023 <a target="_blank" href="https://makerworld.com/de/models/102023#profileId-108654" rel="nofollow noopener">Rod Cleaner V2 Set + Lid + Toolcase Magnet Version</a> ★ here is the link <a target="_blank" href="https://makerworld.com/de/models/102023#profileId-108654" rel="nofollow noopener">https://makerworld.com/de/models/102023#profileId-108654</a>&nbsp;★ New ★ Update ★ <a target="_blank" href="https://makerworld.com/de/models/99424#profileId-105992" rel="nofollow noopener">Rod Cleaner Set + Tool Case</a> here is the link <a target="_blank" href="https://makerworld.com/de/models/99424#profileId-105992" rel="nofollow noopener">https://makerworld.com/de/models/99424#profileId-105992</a>&nbsp;<h3>★ Dont forget o clean your X-Axis ★ here is the link <a target="_blank" href="https://makerworld.com/de/models/89719#profileId-98171" rel="nofollow noopener">Carbon Rods Cleaner V2 X-Axis (simple and fast)</a> <a target="_blank" href="https://makerworld.com/de/models/89719#profileId-96043" rel="nofollow noopener">https://makerworld.com/de/models/89719#profileId-96043</a></h3>&nbsp;Based on the <a target="_blank" href="https://makerworld.com/de/models/89719#profileId-98171" rel="nofollow noopener">Carbon Rods Cleaner V2 X-Axis (simple and fast)</a> , I have now designed a Rod Cleaner for the Z-Axis. Again, it's Simple and short time to print.Of course, there is also a version that is a bit smoother but takes a little longer.&nbsp;LET'S GET STARTED!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_2390fb036d154.gif"></figure><ol><li>Print</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_ac8ecc42289ed.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_6d92973f821df.jpg"></figure>&nbsp;2. Take a sponge and cut 2 pieces to the size of 20mm x 30mm, just like with the <a target="_blank" href="https://makerworld.com/de/models/89719#profileId-98171" rel="nofollow noopener">Carbon Rods Cleaner V2 X-Axis (simple and fast)</a> , and press them into the designated openings. Now soak them with ISO<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_70401aa53f222.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_d9d9bf02ef0d1.jpg"></figure>&nbsp;3. Let's start the cleaning!&nbsp;Place the small box around the Z-Axis, hold it with your fingers, and press the desired direction on the display... the cleaning begins :-) Pay attention to the final distance of the Z-Axis Top and Bottom . Do not drive too far, as you could otherwise damage your printer.Cleaning the rear Z-Axis is also possible without disassembling the entire printer. For this, I recommend the Rod Cleaner Z-Axis Complete Version (what a name) here you dont need to hold it all the time, the tweezer makes it for you :-)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_db6ad16220329.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_19af0e1d1c595.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_0242a76fe13eb.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_ac1d6cddb1a58.jpg"></figure>&nbsp;4. The tweezer for the box with the spacer is very convenient. If you use this combination, you have your fingers free and can easily clean your Z-Axis as shown in the pictures. Of course, it can also be used without a spacer.<img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_fe174a641f46e.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_572c04a99f2e4.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_f1835362a064a.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_9b348ba16ee12.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_05e1c1c9c2c7c.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_e3051c947c0df.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_0205ce3e2f2cf.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_45328085ad19.jpg">&nbsp;&nbsp;4. After you're done, it should look like this :-)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_a85fb86992665.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464529/2023-12-17_d100deacc503.jpg"></figure>&nbsp;5. After cleaning, you should grease the Z-AXIS again. The included grease in the accessories should be sufficient; if not, purchase new grease.&nbsp;easy to use, easy to clean&nbsp;Have fun building and cleaning!&nbsp;if you like my work/project consider supporting me with these options:<ul><li>leave a like</li><li>leave a comment</li><li>download the file</li><li><a target="_blank" href="https://www.buymeacoffee.com/thebiggreek" rel="nofollow noopener">or By me a Coffee</a></li></ul>I also appreciate comments a lot.

Complete Rod Cleaner Z-Axis Version No.1

Printer Tools

Longracks Labs

Mashup of Dry Pods and Desiccant tray models for using desiccant beads in AMS.&nbsp;v2 in Raw Model download includes update includes:<ul><li>Plate with DryPods (0 degree offset), and trays (same as v1)</li><li>Plate with DryPod at 30 degree offset</li><li>Plate with ‘skinny’ DryPods as needed (with AMS wear preventer, etc.)  </li></ul>Drop a Boost if you are happy with this print!

Dry Pods and Desiccant Trays for AMS

Willi 3D

Create a pit droid …. or more! (They work better in groups.)&nbsp;If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work bye me a coffee.</a> Thanks!&nbsp;Description:This is a KIT CARD of a pit droid. Scale 1:10&nbsp;Update:(24/08/23) <ul><li>optimized printability of the pelvis</li></ul>(18/08/23) <ul><li>optimized upper leg to pelvis fit</li></ul>Printing:Layer height: 0.1Supports: NoBrim: NoMaterial: PETG, (ABS), (PLA)&nbsp;Assembly: The connections are designed and optimized for PETG, the use of PLA or ABS makes assembly more difficult and the parts can break. Follow the instructions in the picture.

Bambu Mods

Printer Tools

AMS

Schnick Schnack