NinjaSeb

Sitsero

Elevate your beach experience with the &#34;Cool Buddy,&#34; a specially designed container to keep your beer or energy drink cans chilled, no matter where you are. This innovative design features hollow outer walls that can be filled with water and frozen, ensuring your drinks stay refreshingly cold even under the scorching sun.<h3>Features:</h3><ul><li>Innovative Cooling System: The hollow walls are designed to hold water, which can be poured in through a designated orifice. Once frozen, these walls provide long-lasting cooling for your beverages.</li><li>Two Versions: Comes in two versions to suit your needs:<ul><li>With Feet: Equipped with feet that can be easily embedded in sand, providing superior stability on the beach.</li><li>Without Feet: Ideal for use on flat surfaces like tables or poolside, offering better stability without the need for sand.</li></ul></li><li>High-Temperature Resistant: Designed to be printed with high-temperature resistant filaments, ensuring durability and performance even in hot environments.</li><li>Universal Fit: Sized to accommodate standard beer and energy drink cans, making it a versatile accessory for any outing.</li><li>Easy to Use: Simply fill the walls with water, freeze, and enjoy cold drinks wherever you go.</li></ul><h3>How It Works:</h3><ol><li>Fill with Water: Pour water into the hollow outer walls through the designated orifice.</li><li>Freeze: Place the &#34;Cool Buddy&#34; in the freezer until the water inside the walls is completely frozen.</li><li>Enjoy: Insert your drink can into the &#34;Cool Buddy&#34; and enjoy a refreshing cold beverage on the beach, by the pool, or at your favorite outdoor spot.</li></ol><h3>Specifications:</h3><ul><li>File Format: STL</li><li>Dimensions: Optimized for standard drink cans (330ml - 500ml)</li><li>Printing Recommendations:<ul><li>Filament: High-temperature resistant filament (e.g., PETG, ABS,ASA)</li><li>Layer Height: 0.2mm for robust walls</li><li>Infill: 20% for balance between strength and material usage</li><li>Supports: Recommended for the feet</li></ul></li></ul><h3>Usage:</h3>Perfect for beach trips, picnics, camping, or any outdoor activity where keeping your drinks cool is essential. The &#34;Cool Buddy&#34; combines practicality with innovation, ensuring you always have a cold beverage in hand.<h3>Notes:</h3><ul><li>Ensure your printer settings are optimized for high-temperature filaments to prevent warping and ensure durability.</li><li>Allow sufficient time for the water in the walls to freeze completely for maximum cooling efficiency.</li><li>Cleaning is easy; just rinse with water after use and before refreezing.</li></ul>Stay refreshed with the &#34;Cool Buddy,&#34; the perfect companion for your outdoor adventures. Print yours today and enjoy chilled drinks wherever you go!Download the &#34;Cool Buddy&#34; 3D file now and make your next beach trip cooler than ever! 🏖️❄️

Cool Buddy - Your Ultimate Beach Buddy!

Jeux d'été 

Jonas_H

If you like plants, lights and 3D printing then this could be a nice project for you.This print is a plant pot that combines all these things together in one thing - a glowing plant pot.&nbsp;The special thing is that you can change the inner look from the plant pot when you cahnge the type and density of the infill pattern. You can review these changes in the slicer when you temprarely set the wall loops to zero. In the uploaded print profile you can find the variants that are pictured in the photo section.&nbsp;As a light strip I have used these 10m long ones from Amazon: <a target="_blank" href="https://amzn.to/42NRtFl" rel="nofollow noopener">https://amzn.to/42NRtFl</a> (this is an Affiliate Link. When you order with this Link I get a small provision and that helps to support my work)&nbsp;As filament I have used a transparent PETG Filament for the part A and matte black PLA Filament for part B and C.&nbsp;The assembly is pretty straight forward.The first step is to insert the whole LED strip through the hole onto the plant pot.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/585393/2024-02-18_e94e7cce8eb11.png">&nbsp;In the next step you can fix the end of the LED strip with some tape to the inner plant pot (part B). Now simply roll on the whole LED Strip to the inner plant pot.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/585393/2024-02-18_f7d992e3c29dd8.png">&nbsp;When this is done fix the other end to the inner plant pot with some tape. Now you can insert the inner plant pot into the outer part. If you want you can glue the two parts together.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/585393/2024-02-18_6193c0b3c5fff8.png">&nbsp;Now you are finished. If you have any questions or improvemnt sugestions please leave them in the comments. I would be more then happy to answer them.&nbsp;Happy printing :)

The glowing PlantPot

Deco

Ritz.Prints.3D

Did a bunch of research and used a Chatgpt a bunch but low and behold I have been able to create an openscad script that allows you to duplicate your house key just by knowing the key code.this will work for Kwikset Kw1 and Kw10 as well as Yale Keys&nbsp;The key code can be determined by using a key decoder (see video below ).Key decoder can be printed “<a target="_blank" href="https://www.yeggi.com/q/key+decoder/" rel="nofollow noopener">https://www.yeggi.com/q/key+decoder/</a>”&nbsp;Once you know the key type and Key code just put the key codes into the customize interface and generate a duplicate set of your key. Please note i have not tried all the key types as I don&#39;t have all these lock types. see video below for how to use a Key decoder. this is not my video, just something I found online&nbsp;<a target="_blank" href="https://www.youtube.com/watch?v=kV2HpImF8nY" rel="nofollow noopener">Video</a>&nbsp;*Disclaimer this is a plastic key and is not as strong as a regular key. I take no responsibility for damage if the key breaks in the lock. do not use this in a lock that it will be a problem if the key breaks in it. Don&#39;t say I never warned you lol&nbsp;I think the best use of this would be to keep it as a spare to reference if you need a real key made. Let me know your thoughts in your comments, maybe I can improve the script &nbsp;&nbsp;

Duplicate Your Keys 

Utiles!

fay3dlab

This is the beginning of my Pokemon suspended collection..  all the pokemon will be suspended in the incubator sleeping..  The model is made using multicolor prints.. I used the bambu LED kit 001 for the lights..there is actually position for 2 LED kit lights both on the top and bottom.. but since i only have one kit.. i opt to put it on top..<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/681403/2024-01-21_e4dc115bb9255.gif"></figure>&nbsp;The top part of the incubator has a dummy/support that needs to be remove so you can insert the color screen.. not that i think about it.. you only need to do this if you multicolor print the incubator.. so im going to add another profile that already combine all the parts for non-multicolor prints..&nbsp;To assemble the suspended charmander is going to take a little patience:<ol><li>If you are going to install the LED kit like mine.. you'll first need to insert the peg into the pokemon body to help stabilize each half of the model</li><li>now there will be a channel in the back side of the frame holding the suspende model.. this is for the USB cable of the LED kit..</li><li>insert the cable and carefully close the 2 half.. you should leave some slack on the top</li><li>now use double sided tape on the LED kit and tape it to the top incubator.. there should be a channel for the wires too..</li><li>if you want to defuse the bright light you can use the screener i provided.. there should be grooves to insert the it..</li><li>now slowly cap the 2 half of the suspended charmander</li><li>once close.. you can cap the bottom holder of the suspended model.. there should also be a channel for the USB cable</li><li>lastly the place it on the bottom piece of the incubator and there is also a slot if you want to put another LED kit for the bottom..</li></ol>and you done..&nbsp;<blockquote>If you're thinking of buying the LED kit.. please do support me by using my affliate link here.. <a target="_blank" href="https://shrsl.com/4g18i" rel="nofollow noopener">LED LAMP KIT 001</a> every little things helps me out..</blockquote>&nbsp;One important thing to remember when printing suspended model is to set the wall generator to arachne from classic.. this will make the slicer print the strings.. and NO SUPPORTS..&nbsp;I hope you guys have fun printing the suspended charmander..

Jeux d'été

Deco

Utiles!

Figurines