NicTardif

JP Creations

I made this storage storage box so it can hold some of the most used storage devices around the house.For assembly you need 6x m2x16mm screws. But you can also use a piece of fillament and melt the edges with a piece of metal that you heat with a lighter.&nbsp;Fillament: AnySupports: NoBrim: Yes on the clips is adviced&nbsp;i used bambu PLA for the print but you can use everything your heart desires

Storage Storage Box

Tools

wesyarber

My printer is stored in a closet with a lot of unused clothes rack space, so this is a perfect solution for me. This is not a remix but is inspired by <a target="_blank" href="https://www.printables.com/@Jackson" rel="nofollow noopener">Jackson</a>'s <a target="_blank" href="https://www.printables.com/model/165877-closet-rod-filament-hanger-3in" rel="nofollow noopener">original design</a>. I redesigned these to be much lighter / use less filament and to accommodate slightly wider cardboard spools with plastic rings around them for the AMS. This was not designed to feed filament to the printer straight from the hanger but just for storage. It is possible that it would do fine to feed filament directly from this, but I do question how well it would hold up if the filament got tangled and the extruder pulled with a lot of force on the spool. For generic PLA, it cost about $1 USD and takes an hour to print a pair of these. You can fit 3 pairs of them on the X1's build plate at a time if you rotate them cleverly. See the included print profile. Please let me know if you print this for yourself and find it useful!

Tools

Printer