Nibulak

Bas van der Ploeg

No supports needed. Printed in PLA with a 0.16 mm layer hight. The connector itself is stuck to the board using some nano tape, but some hot glue would do the job too.

Wemos D1 mini + LED Strip Case

Smarthome 

Helvedo

Helloi was looking for a controller Stand for my new Xbox Elite 2 Controller but couldnt find one, so i designed one myself.It includes the magnetic dock that comes with the controller, but it tilts it abit so it matches the other stands I have at my tv.I am using a 90° ankle adapter with the original cable, so that its not visible from the frontI also added 4 14mm holes for rubber feet.The magnetic doc should fit tightly and wont fall out. I tried it in PLA and PETG.i printed it with 0,12mm layer height to look good, but 0,2mm will also work without any supports. I only had issues with the overhangs when i used 0,28mm.&nbsp;I hope some of you have the same fun with it as i had making it.

Xbox Elite 2 Controller Stand for magnetic dock

Gaming

Emerge in 3D

For all the Yamaha's fans and lovers, feel free to print this and share with your friends!Absolutely loving the content? Dive deeper into the experience by hitting that 'Follow' button! 🚀&nbsp;Socials:  <a target="_blank" href="https://www.tiktok.com/@emergein3d_" rel="nofollow noopener">emergein3d_ (@emergein3d_) | TikTok</a> <a target="_blank" href="https://www.instagram.com/emergein3d/" rel="nofollow noopener">Emerge in 3D (@emergein3d) • fotos e vídeos do Instagram</a> <a target="_blank" href="https://www.youtube.com/@emergein3d_PT" rel="nofollow noopener">Emergein3D PT - YouTube</a>

Yamaha Keychain

Key Chain 

Microsuck

Die Leisten habe ich auf Thingiverse gefunden und ein paar Bohrlöcher hinzgefügt. &nbsp;<a target="_blank" href="https://www.thingiverse.com/thing:5916536" rel="nofollow noopener">https://www.thingiverse.com/thing:5916536</a>&nbsp;Ich bevorzuge Schrauben :)

LED Leiste, LED Profil, LED Strips

Kanäle

ozenz3D

Hello,&nbsp;Start with BlackAt Layer #5 Swap to Red (0.48)At Layer #8 Swap to Yellow (0.72)At Layer #12 Swap to White (1.04)&nbsp;Do not hesitate to post your print.&nbsp;Good print !

Roronoa Zoro HueForge

hueforge 

Kieras 3D Creations

3D Printed Diffusion Panels

Sound Diffusion Panel

wandbau

3Deekes

Z-Rod Dust Cover with (spinning) Bambu Logo&nbsp;Inspired by other Dust covers I wanted ones with a little more “Pazaz” :) This way you can protect the Zrods top from dust in BambuLab Style :)&nbsp;I made these with the BambuLab logo , there is a filiament swap so it is dual-color. I used black/white but you could also use the iconic Bambulab Green offcourse.&nbsp;Quick 12 minute print (or 6 if you don't do bed leveling and such) and only +- 2 gr of fillament.&nbsp;&nbsp;Cool bonus is that the logo spins around during Z movement :)&nbsp;&nbsp;Be sure to check out my other models and/or give me a follow :)

Z-Rod Dust Cover with (spinning) Bambu Logo

Druckerzubehör

Gr3dstampaidee

i have different tools (scissors, wrench, caliper, ecc..) piled in my drawerno supporteasy print&nbsp;accessories add<ul><li><a target="_blank" href="https://makerworld.com/en/models/141937#profileId-154516" rel="nofollow noopener">IKEA SKADIS TRAY by Gr3dstampaidee - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/151801#profileId-165723" rel="nofollow noopener">IKEA SKADIS SCREWDRIVER by Gr3dstampaidee - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/169213#profileId-185817" rel="nofollow noopener">IKEA SKADIS SCRAPER BAMBU LAB PEGBOARD by Gr3dstampaidee - MakerWorld</a></li></ul>

IKEA SKADIS TOOL HOLDER

Skadis

rfnovo

Extended version that will fit 18 large eggs. It will fit perfectly on US fridges. Also fixed some imperfections on the original STL

Fridge Egg Dispenser

Küche

Madengue

A nice holder for your helmet to rest with a secondary hook for your keys aswell. It can also be used to display costume / cosplay helmets or masks on the wall for a nice effect.I have several variations with different logos and finishes, sadly I cannot upload all the photos for every variation so feel free to browse in the downloadable files for the correct variation you are looking for.

Helmet Holder / Hook [39 Variants]

Motorrad

KYZ Design

<h3>Bees may have bestagons but humans still build rectangular walls. So here are the rectangular frame pieces!</h3>There are framed pieces for a few different sizes:<ul><li>The 12x9 System - recommended for X1 and P1 series printers - the middle pieces are 12 cells wide by 9 cells high. This makes the biggest pieces per print on a 256x256 bed with a filament cutter exclusion area (i.e. on a P1P/P1S/X1C without physically blocking out the filament cutter). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/16011" rel="nofollow noopener">here</a> and I also included this in the print profiles as it is my model (it's one of the first things I modelled and shared after getting my P1P!).</li></ul>&nbsp;<ul><li>The 12x10 System - recommended for the A1 - the middle pieces are 12 cells wide by 10 cells high. This makes the biggest pieces per print on a 256x256 bed without an exclusion area (i.e. on an A1 or a <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">tweaked</a> P1P/P1S/X1C). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/16011" rel="nofollow noopener">here</a> and I also included this in the print profiles as it is my model.</li></ul>&nbsp;<ul><li>The 8x7 system - recommended for the A1 Mini - the middle pieces are 8 cells wide by 7 cells high. These are designed to maximise the 180x180 bed of the Prusa Mini, and consequently will also maximise the bed of the A1 mini. The middle piece for this system can also be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;<ul><li>The 10x10 system - the middle pieces are 10 cells wide by 10 cells high. These also fit on a 256x256 bed. This makes panels that have a more rectangular aspect ratio and less cells but you may have already started printing these. These may also better fit your wall space that you are trying to fill up due to the slightly different dimensions. The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;<ul><li>The 10x8 system - the middle pieces are 10 cells wide by 8 cells high. These max out a 220x220 bed (Ender 3 and Similar). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;&nbsp;For those of you that want other sizes for other printer beds, remix is allowed! Or leave a request in a comment if you can wait :)&nbsp;If you need HSW help in general, check out the honeycombwall subreddit.&nbsp;<h3>Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models.</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/594876/2023-12-10_fde779d8f407b.jpg"></figure>

Framed HSW - Various Sizes - Honeycomb Storage Wall

KG3Dee

Well ventilated under desk laptop holder.No supports needed.I printed at 0.2mm layer height, 3 walls and 15% gyroid infill. Add brim for better bed adhesion.You will need to clone the part and mirror it for the other side. (Left/Right version)Recommend PETG or other higher temp resistant filaments.&nbsp;&nbsp;

Under Desk Laptop Holder

Schreibtisch

Danny Hermans

An additional storage space that fits the IKEA Malm series. The are 2 STLs, one for each side.<h3>Print instructions</h3><h3>Category: Organization Print Settings</h3>Printer Brand: CrealityPrinter: CR-10SRafts: Doesn't MatterSupports: NoNotes:Prints without supports, infill etc does not matter, filament can be anything that fits for you

IKEA MALM additional space

organizer 

FunkyArt

<div><h1>Summary</h1><div>Don't waste your last meters of Filament, print your very own cable ties :) . This thing was created for the last meter contest on Printables. The cable ties are surprisingly stable and also flexible enough when printed with PLA, but you should switch to PETG or TPU if you want to put heavier load on them. The last meter is enough for exactly 3 pieces. </div><h1>Print Settings</h1>Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre></div>

Cable ties - Kabelbinder 

Sonstiges 

ossilampe

After I had to hang a few pictures and didn't always want to take the vacuum cleaner with me. I love Fusion360

Bohrhilfe Staubfang

werkzeug

3DPrintCraft

I created this maze using a website linked from the original authors website. I imported the code into OpenSCAD and rendered the model and after imported into Fusion 360 to give it a custom look. This little gold maze box is a ideal gift box, leave a coupon, voucher, or some cash inside. Or even a secret note. I printed this in PLA Silk but also I also tested it with PLA and PETG. Puzzle Difficulty: 8/10 Note: Be gentle or the nubs will wear out (more so with PLA Silk). If you are stuck go, back and try again, it only needs gentle moves to solve. **Print Profile **:Please use one of my print profiles labeled as DESIGNER. They have been tested extensively. Check out some of my other Maze Boxes!! Mini Maze Puzzle (Heaps of fun!) <a target="_blank" href="https://makerworld.com/en/models/62959" rel="nofollow noopener">https://makerworld.com/en/models/62959</a> Large Piggy Bank Maze Box: <a target="_blank" href="https://makerworld.com/en/models/58615" rel="nofollow noopener">https://makerworld.com/en/models/58615</a>

Maze Puzzle Box - Gift Container - 2 Piece

Giftboxes

Kutnohormac

<div><h1>Summary</h1><div>A beautiful minimalist painting of a Processor on the wall. Size 198 x 200 mm</div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender-3 S1 Pro</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0,2 mm</div> <pre><code> Infill: <div>15 %</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=-+PLA" target="_blank" rel="nofollow noopener">PLA </a><pre><code> - Notes: <div>Top/botton pattern - concentric</div></code></pre></div>