Netron

DudeRG

Es handelt sich um einen Dosenhalter zur Befestigung an einer Lochwand von Garant Hoffmann.Der Innen Durchmesser beträgt 67mm und somit fit für gängige Spühdosen.&nbsp;&nbsp;It is a can holder for attaching to a perforated wall from Garant Hoffmann.The inner diameter is 67mm and therefore suitable for standard spray cans.&nbsp;Happy Print

Dosenhalter für Garant - Lochwand

Garant-Lochplatte

LemonArts

Here is my Business Card Holder Check my new Design V2 https://makerworld.com/en/models/372330#profileId-272252  <figure class="image image_resized" style="width:68.15%;"><img src="https://makerworld.bblmw.com/makerworld/draft/713150/2024-01-18_37f1e83f71845.png"></figure> This Card Holder can hold cards of any size. Cards in the 85x55mm format sit flush with the outside of the stand. The stack of cards can be up to 15mm thick.

Business Card Holder

next Projects

humebeam

Hydra PRO - Advanced Bambu Lab AMS

Hydra Pro

DavidsGotWood

<figure class="table" style="width:100%;"><table style="background-color:#eedfdf;border-color:#e26a61;border-style:solid;"><tbody><tr><td style="border-color:#e26a61;border-style:solid;">Please note that the 0.28mm profile from <a target="_blank" href="https://makerworld.com/en/@Mick23" rel="nofollow noopener">Mick23</a> is not for this model. A request has been made to take this model down, but please be aware of this.</td></tr></tbody></table></figure>A simple tool holder for hexagonal deburring knifes with 9 additional blades.This has been modified from the based on the <a target="_blank" href="https://www.printables.com/model/248670-ikea-skadis-deburring-tool-holder" rel="nofollow noopener">version</a> designed by <a target="_blank" href="https://www.printables.com/social/191435-jem_3dprints/about" rel="nofollow noopener">Jem_3Dprints</a>, with the following modifications:<ol><li>The main tool holder has been adapted for the hexagonal-style tool</li><li>the blade mounts have been adjusted for better with and easier blade removal</li><li>The mount has been build for compatbility with the <a target="_blank" href="https://www.printables.com/model/376207-skadis-ultimount-connectorhook" rel="nofollow noopener">Ultimount system</a> (meaning no supports are needed to print this, unlike many Skadis holders designs).</li></ol>This holder requires 3 Ultimount connectors to be used for a secure fit.&nbsp;<a target="_blank" href="https://cad.onshape.com/documents/3eb24eca7b750de2f6f12a04/w/e61bbdc2ec0d628695696f56/e/3830b0550782c75b8ea2cd3e?renderMode=0&amp;uiState=63cc4505c561d35118dc6838" rel="nofollow noopener">Customize in Onshape</a>&nbsp;<figure class="table"><table style="background-color:#40C8E818;border-color:#40C8E8;border-style:solid;"><tbody><tr><td style="border-color:#40C8E8;border-style:solid;">Note for Open Sourcing 3D Printed models:If providing 3D models under an Open licence, please be genuinely #OpenSource, release your source files with your STLs and make it easier for others to collaborate.</td></tr></tbody></table></figure>

Deburring Tool Holder for Ikea Skadis

Skadis

hollowmaker

A dulpo compatible fence, inspired by the original Lego-Duplo-fence.I recommend support structures. But only from touching buildplate.This is the first model i ever made in Fusion360 and the result was testet by my son.&nbsp;Also check out my “Duplo compatible Gate for fence” :<a target="_blank" href="https://makerworld.com/de/models/62308#profileId-64857" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/171676/2023-11-14_884a512e54813.webp"></a><a target="_blank" href="https://makerworld.com/de/models/62308#profileId-64857" rel="nofollow noopener">https://makerworld.com/de/models/62308#profileId-64857</a>&nbsp;&nbsp;Feel free to post a make :)Thank you!

Duplo compatible fence

duplo

Janne.

Brio 90 degrees bridge rampCategory: Mechanical Toys

Brio Bridge Ramp, 90 Degrees Corner

brio

Kevyn 3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Black until layer #6 at 0.56mm Red until layer #19 at 1.6mm Pure Yellow until layer #23 at 1.92mm White for the rest.

Lion - HueForge

Hueforge

kylemraley

<a target="_blank" href="https://makerworld.com/en/models/78647#profileId-82948" rel="nofollow noopener">- Darth Vader Available Here -</a> Full Size Stormtrooper Helmet - Pre colored w/ Bambu Studio & AMS.Multiple plates, and multiple pieces. Glued together. Sorry - no instructions included with original, easiest way for me was to use a reference photo.

Stormtrooper Helmet - Colored

cosplay & RPG

KYZ Design

Originally posted <a target="_blank" href="https://www.printables.com/model/463601-hsw-feet-for-freestanding-walls-honeycomb-storage-" rel="nofollow noopener">here</a>, check it out to see past makes and comments&nbsp;These feet use the Ez-V1 series clip and therefore require no screws, are designed for easy printing, and print in the strongest direction.This will work with standard HSW wall pieces but if you are just having 1 piece, see this for <a target="_blank" href="https://makerworld.com/en/models/26738#profileId-26811" rel="nofollow noopener">single wall pieces with integrated frames</a>.&nbsp;If you print the feet with a fibre filled material (I used CF-ASA) and use it with one of the 10mm thick “HD” wall pieces as shown in the pic (which I printed in ABS+), it will be a very tight fit, but will not wobble and be quite secure.&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my Gridfinity models.

HSW Feet for Freestanding Walls - Honeycomb Storage Wall

Modellbau

Volker88

There are 2 models. One with a plain body and one with a step&nbsp;Dimensions: 240mm x 130 mm

Kitchen Sponge Holder

Haushalt

TripleGWorkshop

– .15mm layers are recommended for details – Quick Guide to changing filament~<ol><li>Have some paper to push away extruded filament.</li><li>When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down. Doing this has given great, repeatable results.</li><li>Use a tool like this to help changes→ <a href="https://www.printables.com/model/329171-filament-change-tool" rel="nofollow">https://www.printables.com/model/329171-filament-change-tool</a></li><li>Have fun & check out my whole 2d art collection <a href="https://www.printables.com/@TripleGWorkshop/collections/345687?o=rating" rel="nofollow">HERE</a></li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/123364/2023-10-27_5v68q4k1c933.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/123364/2023-10-27_r68t5rmgntlg.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/123364/2023-10-27_8ljjin1ckbk5.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/123364/2023-10-27_236gvmw98l7v.png"></figure>

Harry Potter House Bookmarks 2 Color

Gadgets

Julia Ebert

This is a big toy human figure that's inspired by a Lego minifigure. I spent a lot of time making this model from scratch to match the original design while making tweaks for tolerances, printability, and strength. While there were a number of minifigure models I found online, most were not designed for printing, which is a particular challenge for the leg, arm, and hand joints. I'm particularly proud of the universal clip I designed for these, which makes for easy assembly and stiff-enough joints to pose your figure.I designed the clips and tolerances for this model to be printed at 100% (10x original Lego scale), but people have previously had success printing my <a href="https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale" rel="nofollow">10x Lego-like skeleton</a> at smaller scales (eg, 50% or 5x Lego-scale).Now that I have a base model for a Lego-like figure, this opens up a host of options for specific Lego-like figures. If there's something particular you're interested in, leave a comment or send me a message! If you want to make your own modifications, I've included STEP files for all parts (just be sure to give credit for my original design).Fully assembled, this model stands 40 cm (~16 inches) tall. I printed mine with Hatchbox true blue PLA, Hatchbox true red PLA, and Prusament mango yellow PETG.<h4>Printing Instructions</h4>I've included 3MF files for all parts, and parts should import correctly oriented for printing.<ul><li>For PrusaSlicer 2.6+: you just need to load the project file. (This makes use of organic supports, for the legs, which are added with PrusaSlicer 2.6.)</li><li>For other slicers: I've included details about special instructions for all parts, so you should be able to replicate anything necessary for proper printing. Except where otherwise noted, I printed parts in PLA at 0.15mm layer height with 7% cubic infill and without supports.</li></ul>You will need to print:<ul><li><code>32x-connector-pins.3mf</code>: You should need 30 pins for assembly (or 26 if you print the solid head); this has 2 extra just in case. If you have trouble with bed adhesion, add a brim</li></ul><h5>Legs</h5><ul><li><code>legs.3mf</code>: Uses tree supports the top of the lower hole on the leg.</li><li><code>hips.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Body</h5><ul><li><code>arms.3mf</code>: These print with a small surface area on the bed (the wrists), so you might want to add a brim if you have trouble with bed adhesion.</li><li><code>body.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Head & hands</h5><ul><li><code>2x-hands-wrists.3mf</code>: Requires supports on the underside of the wrist clip. Like the limb clips, I recommend printing with PETG (or similar) with 25% infill.</li><li>One of: (all require supports on the underside curve of the head)<ul><li><code>head-face-mmu.3mf</code>: Print the head & face as one part with some sort of multi-material printer (e.g., Prusa MMU or Bambu AMS). Use supports on the underside curve of the head.</li><li><code>split-head.3mf</code> and <code>face.3mf</code>: Print the head (with cutouts) in two pieces. Use pins and glue to connect the halves. Print the face separately and glue it in.</li><li><code>solid-head.3mf</code> and <code>face.3mf</code>: Print the head and face as separate prints. Use supports on the underside curve of the head. Then glue the face parts into the head.</li></ul></li></ul><h4>Assembly Instructions</h4>In addition to the printed parts, you will need cyanoacrylate glue (CA glue/superglue). <h5>Legs</h5><ol><li>Glue the pins into the top of the hip. Add glue to the holes and bottom surface of each of the hip pegs and attach. Important: The slope of each hip peg should be facing out to the sides. If the pins don't want to go together, check that you have this orientation right!</li><li>Use the same gluing approach to attach the limb clips to each side of the hips.</li><li>Gently but firmly press each leg onto the clips. It should snap into place. The hips are symmetric, so you can't put the legs on backwards. This requires a fair bit of force, but you shouldn't need a hammer. If it won't go on, slightly sand or file down the outer head of the limb clip (rather than the inside of the hole on the leg). Warning: The clips are not designed to come out once they're attached, so make sure you're ready.</li></ol><h5>Body</h5><ol><li>Glue the limb clips into each arm, like you did for the legs.</li><li>Glue the wrist onto the hand, with the pins. Because of the relative print orientations here, it's best to use a bit more glue here to make sure it stays on.</li><li>Press each wrist clip into the arm. (They're the same, so you can't put in the wrong hand.)</li><li>Press each arm clip into the body. The body is also symmetric, so you can't put the arms on backwards.</li></ol><h5>Head</h5>If you printed the separate head and face pieces, glue the face pieces into the head. You may need to file or sand some of the face pieces to fit, depending on how well the supports worked.<h4>License Note</h4>This model is marked as non-commercial because I don't want anyone (including myself) having Lego come after them with a lawyer. If you choose to sell prints of this model, you do so at your own risk!

Mega Lego-like Minifigure (10:1 scale)

Spielzeug

Romwba3D

Following on from the sucess of my Rocker Gnome Model on Makerworld , i was asked to do a Christmas Version by some people , i have made two options for you , one with just a Santas hat ans one with him dresssed as Rudolph. I hope you like them and enjoy printing them&nbsp;A Cute Christmas Rocker Gnome / Gonk split for multi-colour printing, also split to enable printing with just one AMS or all in one with more than one AMS.&nbsp;i have also included a single colour STL file single colour or resin printing&nbsp;I have uploaded 3mf Print profiles for both the X1C/P1P and A1 Mini &nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;I have lots of Gnome / Gonks available on the patreon&nbsp;You can view all the Available Models - now over 200 on https://www.romwba3d.com

Rocker Gnome Christmas Version

Deko - Weihnachten

A Cute Rocker Gnome / Gonk split for multi-colour printing, also split to enable printing with just one AMS or all in one with more than one AMS.&nbsp;I have Just Released a Christmas version of this model also :- <a target="_blank" href="https://makerworld.com/en/models/67297#profileId-71190" rel="nofollow noopener">https://makerworld.com/en/models/67297#profileId-71190</a>&nbsp;i have also included a single colour STL file single colour or resin printing&nbsp;I have uploaded 3mf Print profiles for both the X1C/P1P and A1 Mini &nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;I have lots of Gnome / Gonks available on the patreon&nbsp;You can view all the Available Models - now over 200 on https://www.romwba3d.com

Rocker Gnome

Deko - Figuren

3DPrintNovesia

+++ENGLISH BELOW+++&nbsp;3dimensionales Warnschild für die 3D Druck-Abteilung privat oder in der Firma. auch mit Single Extruder Druckbar. Für den Druck beachten: Alle Teile einzeln slicen aber in der richtigen Höhenpostion.Bei dem Düsen Modell sollten mindestens für die ersten mm im Druck ein Z Hop von ca. 10mm eingestellt werden, damit der Drucker nicht gegen den Schwarzen Rahmen des Schildes fährt. Die Dateien sind durchnummeriert und müssen in dieser Reihenfolge gedruckt werden! ACHTUNG: Der Startpunkt von dem Düsen Modell liegt niedriger als die höchste Kante des Schwarzen Rahmens! KOLLISIONSGEFAHR!+++++++++++++++++++++++++++++++++++++++++++++++3dimensional warning sign for the 3D printing department private or in the company. also printable with Single Extruder.For printing note: Slice all parts individually but in the correct height position.For the nozzle model should be set at least for the first mm in the print a Z Hop of about 10mm, so that the printer does not drive against the black frame of the sign. The files are numbered and must be printed in this order! ATTENTION: The starting point of the nozzle model is lower than the highest edge of the black frame! DANGER OF COLLISION!&nbsp;

3D Druck Abteilung Schild (also in English)

Deko - Neutral

3D Schoko

4 versions: Version 1: Tool and plate holder for a China tool wall. With 3 insertion openings for printing plates, 3D Lac, spatula, side cutters, Bambu scraper and Bambu glue stick. Version 2: Like version 1 only with 4 insertion openings for printing plates. Version 3: Without holder with 4 insertion openings for printing plates. Version 4: Without bracket with 2 holes for attaching to a wall, with 4 insertion openings for printing plates. &nbsp;Each with a pressure profile with 100% speed and 50% speed in the lower range and 10% filling to prevent warping.&nbsp;4 Versionen:Version 1: Werkzeug und Platten Halter für eine China Werzeugwand. Mit 3 Einschuböffnungen für Druckplatten, 3D Lac, Spachtel, Seitenschneider, Bambu Scraper und Bambu Klebestift.Version 2: Wie Version 1 nur mit 4 Einschuböffnungen für Druckplatten.Version 3: Ohne Halterung mit 4 Einschuböffnungen für Druckplatten.Version 4: Ohne Halterung mit 2 Löcher zur Befestigung an einer Wand, mit 4 Einschuböffnungen für Druckplatten.&nbsp;Jeweils mit Druckprofil mit 100% Geschwindigkeit und 50 % Geschwindigkeit im unteren Bereich und 10 % Füllung um Warping vorzubeugen.&nbsp;&nbsp;