NeroYTHD

Zurlingo-3D

A nine pot multi tier planter, perfect for a windowsill or table!&nbsp;<ul><li>All pots drain into the center section and collect in the bottom.</li><li>Excess water can be left in the bottom to add humidity or can be drained by tipping it slightly.</li><li>The pots are 6cm wide - Perfect for 5.5cm Cactus and Succulents</li></ul>&nbsp;Print Settings:&nbsp;&nbsp;<ul><li>Layer Height 0.2-0.3mm.</li><li>No support or infill required!</li><li>5 top/bottom layers</li><li>3 perimeters</li></ul>&nbsp;Designed and tested to print in place really easily. Make sure your bed is level before printing - If it isn't then you can run into issues many hours into printing.&nbsp;It takes roughly 18-24 hours to print, depending on layer height.&nbsp;Thanks for looking and please upload pictures of your creations with this!&nbsp;

Multi Tier Planter -  No Supports Needed

succulent

h3li0

planter with pattern designed in fusion 360includes platephoto shows printed in grey pla+&nbsp;print profile included&nbsp;part of the patterned planter series:<ul><li><a target="_blank" href="https://makerworld.com/en/models/148633#profileId-162202" rel="nofollow noopener">planter with concave pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/148649#profileId-162217" rel="nofollow noopener">planter with horizontal pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/90177#profileId-96589" rel="nofollow noopener">planter with wavy pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/95872#profileId-102213" rel="nofollow noopener">planter with circle pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/98294#profileId-104777" rel="nofollow noopener">planter with zigzag pattern</a></li><li><a target="_blank" href="https://makerworld.com/en/models/108743#profileId-116153" rel="nofollow noopener">planter with polygon pattern</a></li></ul>

planter with circle pattern

Planter

DonMatis

One Piece wall art for decoration, can be painted with more colours after.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<ul><li>PLA+ Sunlu Black</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray</li><li>PLA Bambu Labs Basic White</li></ul>Swap Instructions:<ul><li>Black until layer #5 at 0.48mm</li><li>Gray until layer #10 at 0.88mm</li><li>Light Gray until layer #19 at 1.6mm</li><li>White for the rest.</li></ul>

One Piece (fanart) - Hueforge

Anime

SavageLau

<h3>If you want commercial license, check out my bio and get it from Patreon. </h3>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/367988/2023-11-16_81cee5f53fc8c.gif"></figure> Hey guys, I made one little candy cane, you can play or put on your chrismas tree. Have fun and happy holiday. The model is so little, so it is a bit tricky to print, you will need to add brim and support for top part. Or you can use my preset files. You will need to joint two part together(thread), don't put tooooo much force on it. It is very thin wall!!!!

Candy Cane (Retractable) 22g

Christmas

wilko.vehreke

Hey there, fellow design and Fusion 350 enthusiasts! Today, we've got a design challenge that's got me scratching my head. So, listen up, because this is gonna be interesting.You see, I recently took on the task of creating a multicolored version of this design. Let me tell you, it was no walk in the park. I mean, seriously, it wasn't easy. But you know what? I had a blast and learned a ton along the way. That's what it's all about, right? Fun and learning.Now, here's the kicker. After conquering the multicolored version, I thought, "Hey, why not apply the techniques I learned to create a single-colored rope design? It should be a piece of cake!" Well, guess what? Life doesn't always go as planned.I quickly realized that transferring those techniques to a single-colored design wasn't as straightforward as I had hoped. Man, talk about hitting a roadblock. It got me thinking, "What am I gonna do now?"To be honest with you all, I couldn't find a nice way to solve this puzzle. So, I had to come up with a workaround. Sometimes you just have to shake things up. I decided to reorder the components, change the game plan a bit, and rely on my trusty export script to do the heavy lifting. I like to call it “the merge.” It worked like a charm. A quick solution and a clean export - that's what I'm talking about. Sometimes, you gotta think outside the box and find alternative paths to success. And let me tell you, this one's going in the books.

succulent

Planter

Anime

Christmas

Self-Watering Planter