Ncbigfoot

CubicMakers|立方造物

<h2> </h2><h2>Assemble succulents|拼装多肉</h2>Try growing 3D printed plants in your office or home. Give as a gift to family and friends. Bringing a touch of spring!尝试在您的办公室与家里养殖3d打印的植物吧，作为礼物送给家人与朋友，带来一丝春日的气息！&nbsp;Contains a cute cactus and a clump plant assembled model. No ams system, no support, no glue, just splicing! Some details can be flexibly assembled and changed.包含一颗可爱的仙人掌与一颗丛生多肉的拼装模型。无需ams系统，无需支撑，无需胶水，完全依靠拼接！部分细节可以灵活的拼装改变。<figure class="image image_resized" style="width:43.95%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_cd9e9d61b51b6.jpg"></figure><figure class="image image_resized" style="width:42.92%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_e7c2c94644e27.jpg"></figure><ul><li>The flowerpot is designed with holes so that real succulents can be planted.</li><li>花盆设计了孔洞，也可以种植正真的多肉植物。</li></ul><figure class="image image_resized" style="width:44.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_8767b6400430b.jpg"></figure><figure class="image image_resized" style="width:45.74%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_5036e148e8f0e.jpg"></figure><ul><li>The connection between the soil and the flowerpot uses elastic buckle designs on all sides. When the 3D printed soil is not loaded, it will not affect the cultivation of real succulents. (Ignore the soil color in this photo)</li><li>土壤与花盆的连接，四面使用弹性的卡扣设计，不装入3d打印的土壤时亦不影响养真正的多肉。（忽略这张照片的土壤颜色）</li></ul><figure class="image image_resized" style="width:47.74%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_d8cd8adee7fd2.jpg"></figure>&nbsp;<ul><li>The connection between soil and plants uses buckles or threaded connections. You can assemble any plants on top. It should be noted that the threads are placed vertically for printing convenience. The strength is limited and cannot be subjected to excessive force.</li><li>土壤与植物的连接使用卡扣或者螺纹连接，理论上你可以拼装任意的植物在上面。需要注意，螺纹为了方便打印是竖着摆放的，强度有限，不能受过大的力。</li></ul><figure class="image image_resized" style="width:47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_5b0144b12d0b6.jpg"></figure><ul><li>The cactus and the clump plant main body are fixed using the screws mentioned above.</li><li>仙人掌与丛生多肉的主体都使用上面提到的螺丝固定。</li></ul><figure class="image image_resized" style="width:46.08%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_79981de68c573.jpg"></figure><ul><li>The decorative cactus flowers are also installed using small screws. The screws and flowers are printed separately. After printing, assemble them together.</li><li>仙人掌的装饰花朵也使用小螺丝安装，螺丝与花朵是分开打印的，打印完再组装到一起。</li></ul><figure class="image image_resized" style="width:45.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_bc669e88281ec.jpg"></figure><ul><li>The red core at the top of the cactus is actually a screw. It is printed upside down. Flowers used to secure petitions. There are also limited holes between the flowers and the core.</li><li>仙人掌最上面的红色花芯其实是螺丝，是倒过来打印的，用来固定上方的花朵。花朵与花芯之间也有限位的孔。</li></ul><figure class="image image_resized" style="width:44.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_6c330affea319.jpg"></figure><ul><li>The connection between the main trunk and branches of the clump plant relies on buckles. Use the same clips for the branches and flower cores above. You can play as many sections as you want.</li><li>丛生多肉的主枝干与树枝之间的连接依靠卡扣，树枝与上面的花芯使用同样的卡扣，想拼几节都可以。</li></ul><figure class="image image_resized" style="width:47.75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_494461f672e9a.jpg"></figure><ul><li>In order to avoid supporting the printing, a small buckle is used between the branches and leaves. Just be careful when installing here.</li><li>树枝与树叶之间为了免支撑打印，利用了一个很小的卡扣，这里安装时小心一点就好。</li></ul><figure class="image image_resized" style="width:50.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_20779cee0cf79.jpg"></figure><ul><li>On top of the 3D printed soil, there are fake stones directly connected by threads, and vines and flowers connected by buckles. Can be freely matched.</li><li>3d打印土壤之上有直接通过螺纹连接的假石头，与使用卡扣连接的藤曼与花朵，可以自由搭配。</li></ul><figure class="image image_resized" style="width:50.65%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858030/2024-04-14_6399cd9fe5662.jpg"></figure>&nbsp;

Assemble succulents|拼装多肉

Wifey

Saber3D

Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;A new creature has arrived! Welcome the adorable Fox Spirit.&nbsp;No Supports necessary!&nbsp;For personal non-commercial use only. Please do NOT redistribute the files to anyone else.&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;We really appreciate your support!&nbsp;Please share images of your prints, we love to see them!&nbsp;Follow our socials to see new models!&nbsp;<a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">https://www.instagram.com/saber.3d</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">https://www.tiktok.com/@saber3d</a>

Flexi Fox Spirit 

flexi/articulated

RB1105

Fun little fidget twister/spiral, just to tinker with at the office or house.&nbsp;There is a short rod and tall rod included in the print just delete which ever one you don't want to use. I like the tall personally.This print works well with a coextrusion filament but a gradient or rainbow could work well also.You could even use the paint to paint the spirals or by layer height.&nbsp;&nbsp;&nbsp;

Fidget Twister

"fidgets"

Thinkable

Introducing the Modular Expandable Filament Rack from Thinkable Creations!&nbsp;✅ Expandable✅ Customizable✅ Strong&nbsp;If you are like me, struggling with a growing collection of filament is a challenge. I loved the idea of the RepRack wall mounted filament holder, but in my smaller workshop I didn&#39;t have enough wall space. This filament storage system is expandable horizontally and vertically so you can store as many filaments as you like. Hopefully this model helps you all with the same problem that I had!&nbsp;This model uses ¾&#34; PVC pipe as well as the 3D printed support brackets. This system is expandable, meaning you can print as many support pieces and create as many rows as you want for both filament rolls as well as boxes of filament. Be sure to share your makes below!&nbsp;<h2>List/Cost of Materials you will need:</h2><figure class="table" style="width:66.47%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><thead><tr><th> </th><th style="text-align:center;">Quantity</th><th style="text-align:center;">Cost</th></tr></thead><tbody><tr><th>PETG Filament</th><td>Minimum: 1500gMaximum (full support): 3000g</td><td style="width:13%;">$30-60</td></tr><tr><th style="height:5px;width:3px;">¾&#34; PVC Pipe</th><td>Minimum: 384&#34;Maximum: 580&#34;</td><td>$20-40</td></tr><tr><th>PVC Pipe Cutter</th><td>1</td><td>$15</td></tr><tr><th> </th><td> </td><td> </td></tr><tr><th>Total Cost of Materials</th><td> </td><td>$65-105</td></tr></tbody></table></figure>You will Also Need:<ul><li>Tape Measurer</li><li>Marker</li></ul>I purchased 10 foot lengths of ¾&#34; PVC pipe from my local hardware store for around $5.50 a piece. I bought 6 of them so that I had extra, in case I messed up cutting the lengths (I did a few times).&nbsp;The rendered CAD Model in the listing photo is the Fully Supported Version of the Filament Rack. It is a bit overkill for the 3ft x4ft sized rack in my opinion, but I&#39;ll let you decide. I personally ended up printing only the minimum amount of support parts, but I always have the option of printing more!&nbsp;&nbsp;<h2>List of 3D Printed Parts you need to print:</h2>*Please print “Hole Test” model before starting project* <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000070525/design/2023-11-21_b5bfa19987bfe.png">Basic Version (Minimalist):<ul><li>(x16) 4-Way Pieces</li></ul><blockquote>“I recommend to print all of the parts for the basic version with 4-Way parts (even the bottom, for stability). This version worked perfectly for me.”</blockquote>&nbsp;&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000070525/design/2023-11-21_1bc7312ba00228.png">Full Version (Max Strength):<ul><li>(x4) 4-Way Pieces</li><li>(x12) 5-Way Pieces</li><li>(x4) 3-Way Corner Pieces</li><li>(x12) 3-Way “T” Pieces</li></ul><blockquote>“Use this version for a super strong rack more than 4 rows tall.”</blockquote>&nbsp;<h2>Lengths of ¾&#34; PVC Pipe you will need to cut:</h2><blockquote>“The maximum length for the filament holding pipe that I recommend is 34in. Any longer and the pipe starts to sag. The total space available will be 32in which will hold around 10-11 rolls/boxes for each row.”</blockquote>Basic Version:<ul><li>(x8) 34 inch length</li><li>(x12) 8 inch length</li><li>(x8) 2 inch length</li></ul>Full Version:<ul><li>(x10) 34 inch length</li><li>(x24) 8 inch length</li><li>(x24) 2 inch length</li></ul>&nbsp;&nbsp;<h2>Hole Sizes:</h2>Inevetably as with all 3D printing projects, you will need to do some test prints. I have pre-measured and adjusted the hole sizes for the pipes that I used, but they might not be exactly the same as yours. That and your printer might have different tollerances than my Bambu Lab X1-Carbon printers. So, before printing a ton of parts, you should print the “hole test” model first. Print it 2 times, once vertical with supports and once horizontal. See if they fit on the end of the ¾&#34; pipes you have just as a double check. If they are correct, fantastic. If not, I&#39;ve included the .STEP files so you can change the hole sizes in your CAD software as needed.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Modular Filament Rack System

accessories 

JamesThePrinter

Gift box version of the Little Debbie Christmas Tree! This is a remix of the <a target="_blank" href="https://www.printables.com/model/649647-little-debbie-christmas-tree-ornament" rel="nofollow noopener">ornament version</a> that I previously released. If you'd like to pack Christmas Tree snack cakes in the gift box, 5 easily fit. Unfortunately, they cannot be stacked. However, a layer of Little Debbie brownies would fit under the trees.Changes that were made to the original:<ul><li>375% of the original size</li><li>Split in two<ul><li>Removed lip from the lid</li><li>Shelled base section<ul><li>5mm side walls</li><li>2mm bottom</li></ul></li></ul></li></ul>***WARNING***This is not a small object! My print time was about 19 hours and I used just over 500g of filament. 290x216x69mm&nbsp;&nbsp;Print SettingsThe model is rotated 45 degrees to allow it to fit the build volume of more printers. This will fit on the Prusa XL and the Bambu Lab X1/P1 series printers. Supports are required for the lid. If the lid is close in size to the max print area, the supports may exceed that print area. To solve this, I switched to tree supports. They tend to stay closer to the object.&nbsp; <a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Ivory White PLA</li><li>Bambu Lab Matte Scarlet Red PLA</li><li>Bambu Lab Matte Grass Green PLA</li></ul>

Little Debbie Gift Box

things

jonathan1987

Attention!The tolerances are specially tight to ensure that the model is stable and does not lose pieces. Make sure you have calibrated filaments and do not overextrude.Look at the instructions carefully and make sure you have a good grip on the plate.The model is designed to be printed in pla.&nbsp;Today I present to you a model initially created for laser cutting on plywood.I wanted to propose it completely 3D printable with also simplified assembly instructions.Have fun assembling it with your children. A pastime to do with the familyHappy Printing.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/653610/2024-03-05_da2db7d5c099e.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/653610/2024-03-05_70a822b88b4f4.png"></figure>

Wifey

flexi/articulated

"fidgets"

accessories

things

kit cards