This is a speaker I made for a Jobsite speaker, this thing slaps, its actually nuts. The model doesn't have the Milwaukee Logo on it, buts its easy to get offline if you want want one just like it. Had plenty of dudes at work asking for one after they heard it. With a 5Ah battery, the fully charged voltage is around 20.5, after 2-3 hours playtime at reasonable volume, it only dropped to 20.2

IN THE SECOND PRINT PROFILE WITH THE MAGNETIC CHARACTER BASE DO NOT INCREASE DIMENSIONS!! IT HAS ALREADY BEEN DONE FOR YOU!!!

I have water leaking on my gas valve in my furnace, need a drain in the intake to stop this from happening, doesn't need to be PVC or glued because it doesn't get hot, the adapters are for a humidifier tube that goes into ¾ PVC pipe

My son got the Story Dream Machine for christmas and he loves it. Of course you have nowhere to put all these dang cartridges everyone buys for it now so in case you needed some storage, here you go

Something that will hold a 1 inch diameter pole or a ¾ inch pvc pipe either have a 1 inch outer diameter, I have done plenty of simulations in fusion, it should hold 10 lbs by itself easy and it will always be paired with another so make it as big as you want and use as many of the brackets as necessary for the weight you would be holding

decided to make something 100% 3d printable, laid in the strongest orientation with no supports, seems to be strong enough for just holding spools and you can make it into whatever you want, its super modular, can be expanded in every direction

Modular Filament storage, wanted something that could be expanded in every direction and could be easily put together, and taken apart, you can add self tapping screws to the vertical supports if you want to make it extra strong

Every time I would go outside my blinds would smack the heck out of my door, there were already screw holes in my door IDK what from originally, I rent, but this is what they're for now

needed something to clip a hueforge to the fridge, here ya go